Razavi Basic Circuits Lec 5: More on KVL/KCL; Node Analysis
Рет қаралды 8,044
2 жыл бұрын
@user-in5ix1xf8x 4 ай бұрын
Thank you!
@djura6303 Жыл бұрын
21:00 Why doesn't he put a ground on the schematics. When inserted into the circuit simulator, the simulation without gnd does not work, and when gnd is inserted, the current through the R1 and R2 branches is 0? Thank you.
@kadarikruthik1241 6 ай бұрын
11:43 how the current from voltage source and resistor are the same. as the voltage source do not follow the ohm's law.
@yan70172 4 ай бұрын
pick any point between the voltage source and the resistor, apply KCL, you can see that the current is the same.
Nikita Zdradovskiy
Рет қаралды 6 МЛН
Behzad Razavi (Long Kong)
Рет қаралды 4,4 М.
Behzad Razavi (Long Kong)
Рет қаралды 3,6 М.
Behzad Razavi (Long Kong)
Рет қаралды 5 М.
Behzad Razavi (Long Kong)
Рет қаралды 10 М.
Office of Global Engagement, IIT Madras
Рет қаралды 4,1 М.