Razer viper mini / Razer mouse sensor fix

Рет қаралды 34,593

Aidan

Жыл бұрын

this is a general fix that should work for multiple different mice.
if you have any questions leave a comment.

Пікірлер: 92

@kawelfragatach8319 Ай бұрын

DUUUDE, you saved my basilisk X hyperspeed, I scraped the connection with a sharp screw I had lying around and it worked!!

@rosht1699 Жыл бұрын

Works thanks

@donbelisario8811 9 ай бұрын

I´ve found that you can also solve it by clening the reflector at the bottom with a little bit of alcohol and an Hyssop, but it was after watching this vid, so thanks man I was about to throug the f mouse to the trash can

@rodrigov7422 8 ай бұрын

Do you know the model or specification of the infrared light?

@dumboz6693 6 ай бұрын

What connection are you talking about?

@Vexcenot 9 ай бұрын

bro gotta brush that mousepad too

@alejandroulloacazorla9023 Жыл бұрын

could u do a vid showing how you cleaned the contacts, i tried doing it but it still doesnt work, all works fine but the sensor

@pixondu6833 Жыл бұрын

For me too

@filipequeiroz6013 11 ай бұрын

in my case, when i move to the left or up, my cursor goes to the extremity left or top side (respectively) instantly. no problem moving exclusively to the right or down, just left and up. do you have any idea on why this is happening? also, i wonder if dissembling could mess up with the warranty policies (not sure if i still can try to get a new one from Razer but yk)

@AidanSidebottom 11 ай бұрын

In terms of your issue I'm not sure how to fix that. you can disassemble the mouse and put it back together without changing anything about it so i don't see you having any problems with a warranty

@jordananderson5980 11 ай бұрын

i have the same exact issue but after a while the mouse sensor stops working completely. buttons still work fine like in the vid

@filipequeiroz6013 11 ай бұрын

@@jordananderson5980 bro, in my case it suddenly came back to normal, but i feel like the sensor could fail again any time soon. i hope you can fix your problem tho. reach redragon's support

@Mani-tx9zp 11 ай бұрын

same problem but at a extreme level even if i flinch a little gets teleports to top left corner or top . and than sometimes it starts working like nothing happened only for it to go back to this state the next day... and now as of typing this the sensor completely stopped working than i dissembled it like this video said so... just by doing that it started working again i cleaned it, still working than after a while it started teleporting like crazy again. as of now the sensor has completely stopped working... idk wht to do with thing

@filipequeiroz6013 11 ай бұрын

@@Mani-tx9zp exactly same thing here, mate. exactly how you described. it's probably the sensor, then. i don't think our mouse's issue has any solution haha. if you like the shape of that mouse, you should go for the wireless DELUX M800, i've only heard good things about it. good luck!

@slaw1448 Жыл бұрын

having the same issue but cleaning didnt work. It's particularly strange because for the past few days it was randomly working and would always cease to work after PC shut down. Pretty sure I need a new mice then.

@AidanSidebottom Жыл бұрын

Try bending the box enclosing the light upwards, the solder may not be contacting

@Alex_svv 11 ай бұрын

Try deleting razer viper mini drivers

@Gaolpost 11 ай бұрын

my friend it works to me but it giting again what should i do ? @@AidanSidebottom

@Gaolpost 11 ай бұрын

like if i bend the box upward it start working but after while it get the some problem @@AidanSidebottom

@Tobtob911 Жыл бұрын

You do good video’s 👌👍

@seifislam1263 Жыл бұрын

I have the same problem i cannot see an light ; i have already disassembled it and cleaned it but still no porgress . all buttons works but the sensor does not

@AidanSidebottom Жыл бұрын

If you can't get the light to light up you likely have a dead mouse

@emiyakiritsugu6329 9 күн бұрын

couldn't you specify or mark the area that needs to be cleaned? I didn't get where to clean when you pointed with your fingers

@kawkla_Soul Жыл бұрын

i try to clean glass sensor with water and that works thanks but some time it happening again

@aswHUNTER 3 ай бұрын

got a problem with my viper mini too sometimes when i flick my mouse it instantly disconnecting for a brief moment. cleaned the sensor and also i tried to play fps with it for 30 mins no disconnecting anymore. hopefully it stays like this

@glashxx-xxglashxx_xx5126 Ай бұрын

did you fix it?

@aswHUNTER Ай бұрын

@@glashxx-xxglashxx_xx5126 nope it happens again after a week

@yepppies1689 11 ай бұрын

My razer Naga has this issue where when i restart my computer the Sensor light doesn't turn on, but after a long time it turns on and it works fine. If i never shut down my computer it works perfectly fine. (i bought my mouse 10days ago) Im not sure if this would fix it? I've just had this issue again this morning and kept searching about it, even deleted drivers etc. Was that your issue, the sensor light wouldn't be on when you look bellow the mouse?

@aqplaysgames 9 ай бұрын

Same issue with me before and now in present. My mice died 😂😂

@yepppies1689 9 ай бұрын

I replaced my mice like 2 weeks after i bought it, got another one and its working well.@@aqplaysgames

@baohoang5197 9 ай бұрын

my viper mini still clicks wouldn't move as well although the sensor is still on. but it seems to flicker though. I have tried reinstalling drivers and cleaning sensors but doesn't seem to work.

@nnot_highground3960 9 ай бұрын

mine, it's work for 2 minutes and back to jumping to corner

@IsrarZarif 7 ай бұрын

@@nnot_highground3960any fix?

@blackthief111 5 ай бұрын

@@nnot_highground3960u have the input delay from regedit to too low trust me keep it to 20-35

@bakednotfriedisdead 3 ай бұрын

@@blackthief111 whats the reg key and the path

@blackthief111 2 ай бұрын

@@bakednotfriedisdead i forgot just google how to reduce mouse clicking delay on youtube

@agneeshwar_ 10 ай бұрын

Is it okay to permanently remove the black film sticker covering the sensor and IR led, and use the mouse without it? Is there any crucial function of the film?

@aqplaysgames 9 ай бұрын

U can remove it. It just blocks the ir sensor's light to escape

@raiji359 11 ай бұрын

Bruh hha after literally dissembling my mouse and it didn’t fix anything i just gave up and restarted my pc and mouse just magically starts working 😂

@aqplaysgames 9 ай бұрын

Liar

@nnot_highground3960 9 ай бұрын

@aqplaysgames bro it's truth,I got the same problem and it will happen again until my mouse cursor can't move(razer viper mini)

@mxdesper4522 3 ай бұрын

It work lol😂

@jhonyobregon9502 Жыл бұрын

Friend, could you specify which connection should be deleted?

@AidanSidebottom Жыл бұрын

No connection needs to be removed, just ensure that there is no contact between the two larger connections to the light diode

@johnmark2228 Жыл бұрын

i have the same problem, all buttons work but the sensor doesnt, i will try this method and come back if it works..

@jhonyobregon9502 Жыл бұрын

funciona?

@johnmark2228 Жыл бұрын

@@jhonyobregon9502 sometimes it does sometimes it dont/ also i have fully cleaned the mouse still doesnt work properly

@jhonyobregon9502 Жыл бұрын

@@johnmark2228 friend, which connection did you remove for the sensor to work?

@johnmark2228 Жыл бұрын

@@jhonyobregon9502 i didnt remove any connection, i just remove the screws and then clean the mouse. in the sensor area clean it with a soft small brush

@FreedSeed Жыл бұрын

Got an issue with my Razer Viper 8k When I move my mouse to either the left or right, the cursor will start to climb even though my wrist has not moved up I'm thinking of replacing my mouse entirely due to this, this doesn't appear to be an orientation issue as corrective software such as Raw Accel yields the same results There's another person with this issue of a different Razer product kzfaq.info/get/bejne/bJ6kiLOiys_PZ5c.html I'm wondering if you experience this issue as well? or have possibly fixed it in the past?

@AidanSidebottom Жыл бұрын

I haven't had this issue but I suspect that it's related to the actual mouse sensor which probably can't be fixed

@emilgeorgiev2684 9 ай бұрын

I have the same Issue with the same mouse. It seems razor is a crappy brand.

@pixondu6833 Жыл бұрын

How did you brushed it?

@AidanSidebottom Жыл бұрын

Use a Qtip or a cloth and make sure the two pins don't have anything in-between them

@pixondu6833 Жыл бұрын

@@AidanSidebottom ill try it. Ty

@dailycontentmsc 11 ай бұрын

Can u help me how and whit i sould brushed it?

@ahmedbetchimyounes4932 4 ай бұрын

recently I encountered a problem, my Razer Viper Mini mouse the buttons and Scroll work well but the mouse movement no longer works. please someone help me

@synapse12 3 ай бұрын

did you fix??????????

@ahmedbetchimyounes4932 3 ай бұрын

@@synapse12 No

@emiyakiritsugu6329 9 күн бұрын

@@ahmedbetchimyounes4932 how about now? it has been three months so you must have taken it to some tech store to fix?

@ggena19 7 ай бұрын

Entonces como solucionaría mi problema? Esque no le entiendo mucho al Inglés jsj

@MrChickenD Ай бұрын

1:25 dice que en su caso limpió esa conexión y le solucionó el problema

@rashaida7402 Жыл бұрын

what screw do i do i need to open the back

@AidanSidebottom Жыл бұрын

You need a small Phillips head screwdriver

@rashaida7402 6 ай бұрын

hey so um i dont know what your talking about when brushing off the contact can you make another video and make it more clear which one i should brush off@@AidanSidebottom

@ppouga1318 Жыл бұрын

I ve got another problem ... The sensor just randomly turns off like for a span of 1 sec wich is enough to make you lose a gun fight and recently its been getting worse and worse any tip besides getting a new mouse ..?

@AidanSidebottom Жыл бұрын

if the led seems to turn off occasionally while looking at the bottom of the mouse then you should take the mouse apart remove the plastic enclosure around the light bending the light up and cleaning anything that might be making contact between the two sides of the wire, I found the plastic part that holds the light in place on the PCB is not necessary

@ppouga1318 Жыл бұрын

@@AidanSidebottom ik its the sensor cuz when it flashes and sometimes turns off cant move the cursor even if it moves it moves just 1 cm away from its original position

@AidanSidebottom Жыл бұрын

@@ppouga1318 I should have titled the video how to fix the light that shines on the sensor, if you see any flickering of the red light it is a problem with the light. Just remove the little plastic box around the light and clean the silver colored wire with electrical contact cleaner if you have any, wipe it with a brush or qtips and then bend the light back down, continue doing this until the sensor tracks

@ppouga1318 Жыл бұрын

@@AidanSidebottom ok ill try ty for the advice

@yazeed-vlr Жыл бұрын

i have exactly your problem, have you fixed it yet?

@nnot_highground3960 11 ай бұрын

My cursor jumping to left corner

@nnot_highground3960 11 ай бұрын

When I move up or left it will instant jump to top left corner

@johnnylondonozambrano8493 11 ай бұрын

I have the same problem right now, but sometimes it starts to work again

@nnot_highground3960 10 ай бұрын

@@johnnylondonozambrano8493 happend to me again on this day

@Omers9 9 ай бұрын

Same here. did u fix it?

@Omers9 9 ай бұрын

@@nnot_highground3960 yeah razer products r just bad. Like why did my viper mini stopped working when it was working perfectly 5 mins ago it just doesn't make sense. This is going to be my first and last razer product