RAZOR Ground force with a Predator 212!

Рет қаралды 78,461

5 жыл бұрын

This was an absolute blast to build and even more fun to ride. Ive seen several videos modifying these things but never like this. The entire build was done in one night. Let me know if you want to see more. As always thank you for watching. Please like and subscribe!!!
My Amazon store: www.amazon.com/shop/intheshop1
Instagram nathansgarage
My silicone wedding rings (So comfortable and a must have for anyone that wants to wear a ring but works with their hands): ensorings.com/pages/hands-on?...

Пікірлер: 195

@thisisJim85 5 жыл бұрын

Picked up one of these at a yard sale yesterday for $50. My kids are too young to put an engine on it right now, but in the future I'd like to do something like this to it. You should definitely make a tutorial video of this.

@justinc9911 4 жыл бұрын

good frame had one as a kid and its been 11 years now its rust free and still in good shape I recently welded a 80cc chinese engine went super fine good stability and only thinng is i got shocked by the killswitch while riding in rain lol

@alexmillan6541 4 жыл бұрын

You gave me an a visual of what I want on mine! Thank you!

@InTheShop 4 жыл бұрын

Let me know how yours comes out!

@Dav5049915 5 жыл бұрын

Great time lapse of the work! I figured it wouldn't go anywhere with those tires, just spin em. Man that thing is crazy

@InTheShop 5 жыл бұрын

Dav5049915 thank you! They make “drift wheels” for them. They are on order for the next video.... along with a tad more power 😉

@OscarFlores-jk5yt 2 жыл бұрын

Awesome work man! Can’t believe how resistant that tiny Kart is.

@DrTranSir 5 жыл бұрын

I loved this video thank you!

@InTheShop 5 жыл бұрын

Thank you! I’ll keep them coming!

@jagman2962 4 жыл бұрын

Haha. Nice job man! I’ve always hopped up all my kids riding toys. Just found one of these tonight. Great video man!

@InTheShop 4 жыл бұрын

Awesome! Thank you Jeremy!

@LittleMac907 5 жыл бұрын

Haha that looks like fun. Good editing job. Keep up with the projects cousin. 🤘

@InTheShop 5 жыл бұрын

So much fun! Can’t wait for the next build. I have some modifications to do to this one also.

@SilverBackStacker 4 жыл бұрын

yeah, completely badass build!

@InTheShop 4 жыл бұрын

Haha Thank you!

@dreechino3492 6 күн бұрын

I just got the same cart with a 224

@zerocool3385 4 жыл бұрын

Hahhaha that's bad ass man! Just got me one of these for free so I wanted to convert it how you did lol awesome video man hahaha

@InTheShop 4 жыл бұрын

Thank you! Its tons of fun.

@artemvorobyev1983 2 жыл бұрын

My dude I have exactly the same thing! And it’s wicked!

@samsgarage1716 5 жыл бұрын

Did you see the razor dune buggy I have?I put a 212 on it. I have a garage full of go karts and I really love what you did with your razor.

@321fabrication4 3 жыл бұрын

You have a dune buggy one! I'm going to have to check this out! I just finished a Razor MX with a predator swap and a wheelie bar. Such a blast!

@NickKautz Жыл бұрын

You can supercharge the 212 with an amr300 or 500.

@extremecookingwithchocolat3081 Жыл бұрын

Love it❤

@trdfgaming7664 4 жыл бұрын

This is great

@InTheShop 4 жыл бұрын

Thank you!

@stclairstclair 2 жыл бұрын

In The Shop, I'm going to give you a run for your money... I built the same Razor kart as you have done here, Then I rolled it from decelerating, doing 20, I'm a retired mechanic and am too old and fat to be rolling anything bigger than a joint, I was humiliated and disappointed all at once, dragging my kart home... 6 months has passed and I now possess the worlds most badass Razor Kart, Oh it's pretty, and I can hang corners like a demon, I successfully merged a Razor kart with vintage style race kart designs, I will post a video soon, you've been warned! 😊 (P.S. Most of my work is because of your build!)

@ttvghxstbot9927 7 ай бұрын

Could you list the parts for what you used, thank you

@joew5559 Жыл бұрын

Before you destroy those carts you should put those wheels on a lathe they will center perfectly inside a lawnmower wheel or a small tractor wheel depending on the size in the height that you pick you can get a lot of fun out of this you just Apoxsee them to the wheel itself after putting them on a lead and making them a bit smaller to fit in the hub or rim any tractor supply has them

@lewizvlogz911 5 жыл бұрын

U are smart to build and smart to edit good job man

@treerexaudi Жыл бұрын

Hello by any chance do you know how long the throttle/bike brake cable was? There seem to be a quite a few different lengths for universal fitment. 60" and 72" is two of them it looks like.

@davidcoalkey6074 5 жыл бұрын

You think your shop is a mess you should have seen mine before I cleaned it up a bit last week.

@InTheShop 5 жыл бұрын

I go through phases. Sometimes I like the place spotless and can’t stand the mess. Sometimes I’m glad I have triples of most of my tools because they are spread across the shop and the place looks like a tornado hit.

@FrustratedBaboon 5 жыл бұрын

That went pretty fast.

@InTheShop 5 жыл бұрын

So much fun. I’ll be making another video soon with some upgrades.

@tailopezpartners4060 5 жыл бұрын

In The Shop WHATS the top speed

@ovielluna2037 Жыл бұрын

Hi have a question what size of sprocket did you use on rear

@aliciat1532 4 жыл бұрын

Bigger tires bigger tires!!!

@InTheShop 4 жыл бұрын

Maybe... I kind of like the small wheels and big power though.

@aliciat1532 4 жыл бұрын

How about big tires for some serious off grounding.

@danp6427 5 жыл бұрын

Where did you get the slipper clutch and throttle assembly? I have two of the drift carts with junk batteries, this project seems like the perfect use for them!

@InTheShop 5 жыл бұрын

Dan P the clutch is just an eBay 3/4” clutch and the throttle is a bicycle brake lever and a length of universal bike brake cable.

@wayne3340 4 жыл бұрын

Sienfeld finally did a show about something!

@InTheShop 4 жыл бұрын

Sometimes I feel more like Kramer but thanks for watching!

@wayne3340 4 жыл бұрын

@@InTheShop great job on the Razor!

@InTheShop 4 жыл бұрын

Thank you!

@danielledominguez8937 2 жыл бұрын

This was awesome! We were given two of these buy they’re just not powerful enough for my boys. How much did it cost for the engine? Thanks!

@benjamindales1911 10 ай бұрын

The motor was $200 but you’d be fine with a $80 one from harbor freight you will also need a clutch and chain ext

@RUBYODOME 4 жыл бұрын

I have the same one with an engine on it. I just made a dirt race track in my backyard. And I'm afraid it's too low and going to hit the chain and and sprocket. What wheels can I add that will fit. I was going to take some wheels off my lawn mower

@InTheShop 4 жыл бұрын

It’s very low. I’ve never tried to fit a different set of wheels on it so I’m not sure what will fit but I can try to do some research for you.

@Todd_G_FPV 4 жыл бұрын

Did u have to change out the sprocket on the axle? If so what sprocket did u purchase im looking into making my drifter gas powered

@InTheShop 4 жыл бұрын

I did change the sprocket. I used one I had laying around. I will try to get the specs and get back to you.

@FindShindoHere 3 жыл бұрын

I want to know how you did this because i have one and want to do the same thing

@hmb1988dj 4 жыл бұрын

Put some bigger wheels man! Great job

@InTheShop 4 жыл бұрын

Thank you! I like it with the little wheels haha.

@bradshea9437 3 жыл бұрын

I’m looking to do this myself, where did you get the cables and sprockets, did you put a centrifugal clutch on it?

@InTheShop 3 жыл бұрын

All of the arts can be bought on amazon or ebay. I used a centrifugal clutch. #40 chain, 15 tooth sprocket on the axle. The axle is 20mm so you will have to buy a sprocket with a 3/4 bore and drill it out to 20mm.

@bradshea9437 3 жыл бұрын

Thanks for the info👍

@jakechunasamy9642 3 жыл бұрын

Big Bad Brad hey this to mine I feel very uncomfortable on it but it’s fun and funny to other ppl so do it on ur own attempt

@jakechunasamy9642 3 жыл бұрын

Big Bad Brad good luck bro

@bradshea9437 3 жыл бұрын

Jake Chunasamy Haha I don’t really wanna ride it I just wanna build it lol 😂

@Coolshortsvideo1 2 жыл бұрын

What did you do for the sprocket

@blakelindley2006 2 жыл бұрын

Where did you get the 15tooth axle gear from?

@JocTTV 2 жыл бұрын

what size sprocket did you use?

@thepedalpusherthomascalder9523 4 жыл бұрын

Do more!!!

@InTheShop 4 жыл бұрын

I made a part 2 a couple months ago.

@owenmilam228 4 жыл бұрын

I have the kart, engine, centrifugal clutch, chain and engine plate. I just need to find the axle sprocket. Any recommendations?

@InTheShop 3 жыл бұрын

Ebay or any go kart supply website. You need a 15 tooth 3/4 sprocket. The axle is 20mm so you will have to drill out the sprocket to fit over the axle.

@xyasaki6383 4 жыл бұрын

FYI for anyone doing this it takes a alan wrench for most of it

@InTheShop 4 жыл бұрын

Yes it does. Thanks for watching!

@mrgunz6302 4 жыл бұрын

I bought one yesterday for $50 I want to upgrade it like this but I will need specific details if you can do that will be great thanks

@InTheShop 3 жыл бұрын

Pretty straight forward and really fun. You will need a 10 tooth clutch with a #40 chain, a 15 tooth sprocket for a 3/4 shaft. you will have to drill the sprocket out to 20mm to fit over the axle. I made the motor plate with my plasma cutter but you can buy motor mounting plates on ebay or places like gopowersports.

@thomasfortin8078 4 жыл бұрын

Where can I find the right size sprocket to slide onto the axle?

@InTheShop 4 жыл бұрын

I had the sprocket kicking around from another project but www.mcmaster.com has just about any sprocket you can possibly imagine.

@mikeymata3312 3 жыл бұрын

are u gonna sale it?? that will be aswsome

@kilofrinzztv2370 4 жыл бұрын

What did you use for the sprocket setup?

@InTheShop 4 жыл бұрын

I used a 10 tooth clutch and a 15 tooth sprocket on the axle. The axle is 20mm so you need to get a 3/4 inch bore sprocket and drill the hole out to 20mm. Hopefully this helps.

@mosesvibe 4 жыл бұрын

How did you remove the rings that hold the axel?

@InTheShop 4 жыл бұрын

Snap ring pliers amzn.to/34v9IkA

@enriqueguzman6408 5 жыл бұрын

did you change the axis star or is it the same?

@InTheShop 5 жыл бұрын

I had to change it to match the chain and clutch I used on the motor. The factory sprocket has very small teeth.

@jerardortiz9088 5 жыл бұрын

Does it matter which way you face the clutch?

@InTheShop 5 жыл бұрын

Jerard Ortiz most go kart clutches are bi-directional and can be mounted whichever way works best for your application.

@jeffy1386 5 жыл бұрын

I just bought one for my daughter, she said it’s too slow, how much money do I need to make it run faster for her?

@InTheShop 5 жыл бұрын

There are a few videos on KZfaq that show how to hop up the electric drive. I wouldn’t advise building one like this for a child. This thing is a death trap.

@tailopezpartners4060 5 жыл бұрын

In The Shop I advise it, so the kid can get used to it and become Lewis Hamilton 2.0 👀

@kyle1206 4 жыл бұрын

What sprocket did you use on the axle?

@InTheShop 4 жыл бұрын

I used a 15 tooth sprocket for a 3/4 shaft. The axle is 20mm so you will have to open up the hole slightly on the sprocket by drilling it or using a die grinder.

@jarrettehill1258 3 жыл бұрын

Bigger tiers

@raheemheemofuller4134 2 жыл бұрын

Question I’m working on a similar build what motor did you use and how fast was it

@sploofy4878 2 жыл бұрын

predator 212

@russellschools5535 2 жыл бұрын

I used a 49cc pocket bike motor get them for$50. Lots of power for a small engine

@nswiss19751 4 жыл бұрын

What gearing

@dcuobubbl9163 2 жыл бұрын

I have a electric razor and wanna build it in to a gas power can u please send instructions and tips and blueprints I’m dozer and thank u bud

@2121ELTIGRE 9 ай бұрын

L@@KS FUN BUT A BIT DANGEROUS. IT CAN FLIP EASY, BE SAFE STAY BLESSED :)

@SDDIGBY 4 жыл бұрын

Hey I have dismantled the motor and I am now on the axel part. I don't know how to pull the axel through the axel clamps what do you use to do this

@InTheShop 4 жыл бұрын

Just seeing this now. Did you get it apart? there are a couple of snaprings that hold it together.

@SDDIGBY 4 жыл бұрын

In The Shop no I have not tried yet don’t want to mess it up. How do I take the snapping apart

@InTheShop 4 жыл бұрын

You will need a decent set of snap-ring pliers

@SDDIGBY 4 жыл бұрын

In The Shop ok and then how do you put them back together

@InTheShop 4 жыл бұрын

Just reverse the disassembly steps. The snap rings go right back on.

@danielbuilds7067 4 жыл бұрын

How did you make the gear for the axel

@InTheShop 4 жыл бұрын

I used a 15 tooth sprocket for a 3/4 shaft. The axle is 20mm so you will have to open up the hole slightly on the sprocket by drilling it or using a die grinder.

@Dayz_Ex 4 жыл бұрын

That shit looks scary

@InTheShop 4 жыл бұрын

So much fun man.

@wangsgeorge 4 жыл бұрын

Good stuff. What gears/sprockets did you use on it? I recently came across one for 25 bucks and already have the engine. Just need to figure out the sprocket situation.

@wangsgeorge 4 жыл бұрын

oh which chain did you use? #35?

@wangsgeorge 4 жыл бұрын

Thanks!!!!

@zart3374 4 жыл бұрын

Picking 2 up for $40 tomorrow gonna put Honda 160cc on them.

@InTheShop 4 жыл бұрын

Awesome! They are a ton of fun. Keep me updated.

@stclairstclair 3 жыл бұрын

So did you build it?

@rickjames2764 5 жыл бұрын

Where do I get one of the 2wd axles?

@Todd_G_FPV 4 жыл бұрын

Order one from the drift kart not the go kart its keyed on both sides

@AngelAguilar-dh1jz 4 жыл бұрын

I bought my son the razor go cart, it only runs 12 mph, I’ll pay you if you make it faster then that brother!!

@InTheShop 4 жыл бұрын

Put a gas motor on it! So much fun.

@stclairstclair 3 жыл бұрын

Hell I'm a retired mechanic who needs the money, too bad you are most likely 1800 miles from me.

@jayl314 5 жыл бұрын

Next video will be how to replace those wheel bearings. I thought for sure those bearings would overheat at that speed.

@InTheShop 5 жыл бұрын

The brakes are going to be the first thing that gives up. They were not happy.

@itburnswhenipiss 2 жыл бұрын

By the looks of it, you could probably just use some Bones Reds for a skateboard.

@dp2459_ 6 ай бұрын

How much to build me one i have one myself

@lsxjuan5574 5 жыл бұрын

What # chain did you use ? And what sprocket size

@InTheShop 5 жыл бұрын

I used a #40 chain. I can't remember the tooth count. I'll check on that tomorrow. It is a 3/4i.d. sprocket though.

@lsxjuan5574 5 жыл бұрын

Ok thank you man. building one myself using your video

@InTheShop 5 жыл бұрын

Lsx Juan the sprocket is a 15 tooth

@TedTucholski 5 жыл бұрын

wonder how long before it breaks ?

@InTheShop 5 жыл бұрын

I’ve been riding it off and on for the last two months and nothing broke yet. It’s actually pretty stout. The only thing I need to do is put a jam bolt to keep the motor back because no matter how tight I bolt it down the motor slides forward and loosens the chain. I’ll have another video coming very soon with the kart.

@cjsengines7395 Жыл бұрын

What bore size was the sprocket you put on this?

@InTheShop Жыл бұрын

It was a 3/4 but I had to drill it out to 20mm

@cjsengines7395 Жыл бұрын

@@InTheShop thank you this helps a lot! I am doing the same thing but I got a 79cc predator

@fabianswain3219 4 жыл бұрын

Coo

@shanedunn8789 2 жыл бұрын

Where did you get the accessories for the engine?

@InTheShop 2 жыл бұрын

eBay and Amazon

@jd4fouse 5 жыл бұрын

How much to build one. Very interested for my son.

@InTheShop 5 жыл бұрын

You could probably put one together for $250-300 in parts if you get a good deal on the kart.

@juniorambert7245 5 жыл бұрын

Cómo consigo piezas

@trdfgaming7664 4 жыл бұрын

What chain you usung?

@InTheShop 4 жыл бұрын

#40

@SDDIGBY 4 жыл бұрын

Hey where did u get the actual throttle not the cable

@InTheShop 4 жыл бұрын

I used a bicycle brake lever

@SDDIGBY 4 жыл бұрын

In The Shop hey and if their is a ball on one end and a wire line on the other end of the throttle cable which end would be the one to go into the brake lever? Thanks so much for your help!!

@InTheShop 4 жыл бұрын

The ball end goes into the lever and the wire end goes onto the throttle of the engine. No problem man! Keep me updated how yours ends up!

@SDDIGBY 4 жыл бұрын

In The Shop ok will do still getting all the parts thought it would be a lot more complicated thank goodness I ran into this video it made it a lot more easier for me to understand where all the parts should go! I still think it will be complicated but not as much anymore. Thank you! This is my first ever go kart build

@InTheShop 4 жыл бұрын

Awesome man have fun!

@BrianCouture5446 2 жыл бұрын

Can I hire you to build me 2 of these? I am in Central MA. This is so killer. I would buy all the parts new.

@InTheShop 2 жыл бұрын

The issue is the axles aren’t available anymore. Shoot me an email. I would be interested in doing something. I can dig around for options. Nathan@intheshopmedia.com

@BrianCouture5446 2 жыл бұрын

@@InTheShop sent!

@billypoe3703 5 жыл бұрын

I am guessing you burned a set of wheels on that run. 😁

@InTheShop 5 жыл бұрын

😂 they definitely don’t last long.

@meboy3513 Жыл бұрын

Top speed?

@bux49 3 жыл бұрын

Next motorcycle engine ?

@ariesr4883 3 жыл бұрын

Found those razor force drift karts for $80 for 2 of them! Should I.... lol

@InTheShop 3 жыл бұрын

Haha the answer is always yes

@ariesr4883 3 жыл бұрын

Lol after riding the stock razor I went ahead and bought a 212 Pred 🤣. Can you provide the link to the axle sprocket and chain setup to connect to the pred. First time working on a “kart”. Thanks bro. Btw you crazy jumping that thing lol

@bradshea9437 3 жыл бұрын

How many teeth did you have on the centrifugal clutch?

@InTheShop 3 жыл бұрын

Big Bad Brad I’ll have to check tomorrow. I can’t remember.

@bradshea9437 3 жыл бұрын

Ok thanks for all your help👍

@SDDIGBY 4 жыл бұрын

He does anyone know how to add a sprocket to this go kart in the video or can I just use the sprocket that the kart comes with. And how do I attach it? Or how to bolt it

@InTheShop 4 жыл бұрын

15 tooth #40 sprocket for a 3/4 shaft but you need to drill it out or use a die grinder because the axle is 20mm

@SDDIGBY 4 жыл бұрын

In The Shop so I need to drill the axle or the sprocket and what do I use to drill this

@SDDIGBY 4 жыл бұрын

In The Shop this a a lot to ask and would be a huge favor for me if you could make a quick 4 minute tutorial on how to do this I am just not very comfortable with how to do this and I am a little confused. Thank you for your patience

@InTheShop 4 жыл бұрын

You need to drill the sprocket out. The hole is not big enough to slip over the axle

@SDDIGBY 4 жыл бұрын

In The Shop ahhh ok thank you so much and would I then need to bolt it down or just position it right so that when the kart is moving the sprocket will not slide.

@Randy-le6ub 5 жыл бұрын

Bro why didn't you extend the frame a bit longer

@InTheShop 5 жыл бұрын

I could have done that but I found it to be funnier and more fun to ride being tiny like it was supposed to be from the factory.

@williamholloway3811 2 жыл бұрын

Can u do mine make it go fast

@briantyler9906 3 жыл бұрын

How much $ to build me one??? I want one.

@FactsMattersUSA 5 жыл бұрын

awesome job, I have one for sale if anyone's interested.

@xdcaiiden9128 5 жыл бұрын

A go kart like the one in the video? Or is it a regular non modified go kart

@tailopezpartners4060 5 жыл бұрын

Where are you located and asking price. Need gift for nephew and put engine on it.

@williamholloway3811 3 жыл бұрын

Can u fix mine

@Connor-Auto 3 жыл бұрын

I’m gonna buy a cart like this but I’m getting brand new batteries and new stuff for it for 100 bucks

@isaiahspinney6113 2 жыл бұрын

Wouldn’t bother with the batteries it comes with, just buy a couple drill batteries ( I used the Walmart ones cuz they’re cheap). Works great and hauls a**

@Tjspycorp 5 жыл бұрын

Hey man that’s sick. I built something similar a while back with a built 212, but I couldn’t keep it from throwing the chain. Got it up to 30ish mph a few times but it was SUPER sketchy. Ended up selling it. If you go on my Instagram @_ForzaPhotography and go back to like September 2016 you can see how it looked. I don’t have a welder so I just made my own mount and bolted it to the frame.

@InTheShop 5 жыл бұрын

Awesome! I just checked it out. So much fun,

@thinkdinkle5366 2 жыл бұрын

What clutch and sprocket tooth # did you use

@samsgarage1716 5 жыл бұрын

Hey what’s up let’s race

@InTheShop 5 жыл бұрын

Set it up. Lets make it happen

@samsgarage1716 5 жыл бұрын

In The Shop where do you live at.im in Allentown Pennsylvania

@InTheShop 5 жыл бұрын

I’m in Massachusetts