Everything You Need Is Here.. www.perfectpassrc.com/

raz will get the record soon!!

You need to reduce drag. The antenna could be incorporated into the vertical stabilizers, making one less drag surface. Also, the body mounts and clips could be inverted so the towers and clips are upside down and behind the wheels, making four fewer drag surfaces. Finally, airplanes have cowls on their wheels for a reason. Extend the skirt of the body to encompass the rear wheels and taper it towards the rear (you could, with sufficient planning, cowl the steering wheels, but probably won't). Those changes will give you a total of seven drag reductions. Best of luck!

just a thought Raz, you said its always the front right tyre blowing out, thats the same side the servo is on, maybe try a dual servo setup on steering to better balance steering at high speed. everything is equally balanced front to back of the car except the steering servo!

Back in 1998 when i was into rc Cars, a car that could reach between 40 to 50 miles, was the absolute King.. 😂😂😂 can't Imagine how far this game goes... Keep it up!! Might be so hard to see/control at this crazy speeds!!

Raz Have you thought about bringing 2 ladders and a board to stand up high that way you can get a longer run and see the car better? I see all the guys going for the record either standing on a ladder or the bed of a big truck to get a height advantage so they can get a longer run-up. When we race the driver's stands are up real high so we can see the corners of the track. You should try it. Might be that extra edge you need to break 200+ mph.

198 mph, dropping to 22.x volts on basher lipos. Un...freaking...real...Raz, this car is flat out scary...💪💪💪

Kevin Talbot doesn't stand a chance to ever beat your amazing cars. The time/attention and passion that goes into these builds is fenominal.

Wow, he’s serious about RC cars building. Really hope that you break the record with a fat amount of mph so it becomes as close to impossible to break long time after if it is even approachable from there. Thanks for sharing this.

No one deserves the record more than you Raz! Absolute works of Art 👏👊

I have a little question. Why not build yourself a little stand, that you could be like 1m up, or more, when driving. You've have slightly better view on the car, and us viewers would also see a bit better as the car is approaching. Theres a reason races are also usually from a drivers stand, as it helps with seeing the car. Obviously I've never ran a speed-run, but just a thought. :) Anyway, love the videos as always.

You and Kev must have been talk lol y'all posted so close together. Two speed run videos on Saturday morning. I love it!

Laugh my ass off for people with way too much money and too much time on their hands you are so blessed I work really hard for a cheap RC car

Your a rockstar...Your so calm and mellow when you wreck a car..🤙 I freak out and curse like a sailor when I crash one of my helicopters.

Mega Pass !! 💪 Well Done Massive Voltage Drop 🤯🤯

I'm loving these carbon fiber driveshafts, saving me a lot of headaches. I have 3 sets installed so far. I've already experienced the alternatives; bent out titanium version during g a run and stock, luckily it didn't tear everything up.. I appreciate what you do!

Brilliant, craftsmanship Raz, we are all cheering for you, you are almost there. 207 mph next run. Go go go. John

I use Velcro straps to hold the batteries down. I haven't got close to your speeds, but I do think they would have held your batteries in place for that wreck and I'm pretty sure they're lighter weight. My cut outs to allow them are through the chassis so my straps are outside, but I don't think it's necessary

רז נהניתי מכל רגע לצפות למרות שאני מטיס ולא בתחום הרכבים .. כל הכבוד על ההשקעה 💪

Nice vid brotha! That’s one hell of a first pass AND with bashing batteries?!

You can hear it bottoming out on the ground. Might be beneficial to raise the ride height 1/2 a millimeter on the front and 3/4 of a millimeter in the rear. The rake angle will help maintain the current level of downforce and stability and should stop the bottoming out.

I bought two of your monster servos from perfect pass and omfg. No joke omfg these are the best god dam servos on the planet. If only I had these years ago. My RC’s drive so fucking straight and respond so fucking quick omg. Thank you!!!!!!!!

"It's just Gens ACE!!" - Raz Shifrin (c). 99% of community can only dream about batteries like those Gens 😂😂😂

AWQESOEM Raz! Soooo close! You will raise the bar very soon! 💪👍

Love the content, I built a dual motor rc speed car several years ago and never tested it. I was going for a record and then lost interest, hope you hit the world record as you are the king of rc speed! you officially are the king of rc speed! congrats!

I just love the passion you put into the hobby and how much you want everyone to be part of it❤️

I'm not a RC guy at all, but enjoyed the video. Just looking from a lay persons POV, the shell of the car looks like the weak point. The thin clear plastic shell at 200mph must be flexing all over the place. Added to the that, is there really a need for the "cockpit" atheistic to be on the outer shell? That must be 5 mph in drag alone. I would have thought a low as possible, carbon body, flat all the way, would yield the best results. I look forward to your next videos!

This is amazing. Had no idea RC cars could go anywhere near this fast. For something this precise and risky I'd want to hire one of those big streetsweepers and wash the road clean first.

Food for thought.....have a buddy down where you think the pass will end, really really helps with spotting as well as retrieving cars on their way to charcoal briquette status.

I love that there is no bullshit in this video. Just straight to the point.

Damn Raz, you're so close to the goal and I can't wait to see you smash the record. The Bashing series Li-Po's are a lot better than people think. They are the only Li-Po's I've got and I've personally never had a problem with them.

I love watching these speed videos. It's got to be such a rush doing that in person!

"this is the most powerfull engine you can buy ... so i strapped 4 of them" sir, i got to say, i truelly love your spirit ;)

I wonder if having a squib that deploys a parachute (only if it goes inverted) would save on some parts without adding too much weight? lol, or a Co2 cartridge that deploys a beach ball around it...

Imagine breaking the speed record when Kevin Talbot comes to visit 🙂 Looking forward to more vids Raz !

This is my favorite thing about Raz. Brother you got that dedication and keep going after it!

I just paused the video halfway through to go on Amazon to order 2 perfect pass servos! We shall see how they do in 1/8 Electric Off-road racing here in America

Hi Raz will be awesome if you put cameras on the runway. Hopefully soon you will hit that world record 👏🏾

Man, you guys are brave standing around with no barrier protection. One crash could kill someone!

I bought my monster servo as a birthday present for myself. Got to put it in my kraton this week. My wife and kids bought me the 3s infraction blx, it was a great b- day. I'm hoping perfect pass comes out with some carbon fiber parts for the 3s line-up

James McCoy is the headliner of speed 😎 gitter done

That’s one stunning build. It looks like a factory kit! So so close, a bit more fettling, better batteries and I think you’ll get it. Then you’ll have to go for it officially right? With Guinness there to record it.

For the first run, that’s impressive. You’re getting real close!

I haven't watched this through to the end yet before commenting, so you might give all the stats at the end of the video, like 0 to 60, 0 to100, and the distance it takes to reach 200mph, but I would love to see the statistical comparison to a real full scale dragster, and what it could compete with to the nearest FIA, or NHRA class. Would it do a full quarter of a mile without getting too hot? What time do you think it could do a full quarter of a mile in?

I LOVE the 4 motor configuration. If you ever want to collaborate reach out. We do lots of rapid prototyping on our channel and would love to partner on such unique content.

Put a 360 cam in it it would look sick

This is serious business, not for amateurs

Only 6 miles per hour left for breaking the record. Congrats Raz. 👏. My opinion. Don't change anything!! Gear it up a little bit and that's it. You're so close to do it. Keep it up Raz!!!

Going in a straight line is one thing , it might be interesting to see this beast on a track, maybe a 1:5 track or a go cart track so it could unleash itself a little :D

Great video Raz, shows the journey (not an easy one!) First pass with such a high speed, good things are on the horizon so great job sticking with it 👏👏👏👏👏

I love watching these vids, your attention to detail and quality of build is an artform all by itself. I have no idea if this is even possible or not, but is there a way to gather additional telemetry on your high-speed runs? I appreciate there are probably very few telemetry sensors available for RC vehicles but I feel if anyone can make it happen, Raz can! It would be really interesting to understand more about the forces exerted on a scale model at these speeds, and I for one would love to understand more about the physics involved.

That's insane. I wouldn't be standing out in the open with that car rocketing by me at 200 mph.😯

That car looks beautiful

Great video, Raz. I can almost feel your tension on the speed run. You'll do it, I'm sure. Keep up the great work :)

Great run! that build is fantastic! World record is very close. Keep it up, I cant wait to see it

With builds that expensive, you really should get two guys hanging out the back of the car with leaf blowers and make a couple passes to clear the road off every now and then.

פשוט מטורף אפילו לא ידעתי שיש בארץ תוכן כזה או אנשים שמגיעים לרמות שכאלה בתחום

Clean drift on beginning

kev was out today, raz! don't think you have to worry just yet :-)

Brilliant. Even other content creators respect your diligence. At those speeds, any mishap becomes a yard sale. Carry on, sir. We'll keep watching.

Great video! New to the channel. Just a suggestion. Have you considered buying a "street sweeper"??? They make portable ones that you can push for a few hundred bucks. They might make ones that can attach to a truck (like a plow attachment). It would definitely be worth an investment!

Hey, nice speed. I think you may get better stability using an airfoil shape tail, rather than flat plate which may get fluttery at speed.

Nice run 👍👍clean smooth and knock'n on that door!!! Only in my dreams would my dual motor go that fast....maybe one day lol nice work , beautiful build as always and good luck🤔 202 next run....you got this!

The Manny Khoshbin of the RC world :)

That’s crazy fast 😳 Awesome to see that kind of speed!

Just along for the ride ....epic

I'm not sure exactly if it would be beneficial or not but have you looked into a slow draw capacitor instead of potentially heavier batteries especially if only needing enough power for a run or two

Raz, i hope you crush the speed record by a long ways....207!!!!

Great job Sir, love watching you get closer and closer! Wishing you well and luck on the next run from the US brother!

Yeah sorry kev, i think Raz needs to build Kev a speed car. And kev can build raz a monster basher. Im really happy this run didnt end in tears.

You should put a tiny camera in the clear 'cockpit' of the car , would be cool to see everything going so fast and low to the ground.

Congrats Raz. That was an amazing first pass. Thank you for blazing the trail on speed runs, and passing along some of the tips on what is working for you. I just received my first shipment of Scorched parts. I'm getting very excited about this new journey into a new (to me) segment of RC.

Come back from the ashes to that awesome pass bro! Wow💯👍🏻👊🏻👊🏻👊🏻

With great speed comes great destruction.

great video! also nice builds and those passes were insane.... even on audio alone lol

For the car that exploded the front right at 4:52, was that the second pass on the same tires? In other words, are shaved foams only good for one high speed pass? (>180 mph)

What a first pass my guy 👍👍👍👍 You have such passion brother... absolutely love it. 210+ mph coming soon to a deserted road near you 😂

Yeah you got the new record soon 👍

I'm wondering if a rudder steering setup instead of front wheels would benefit you when destroying wheels. You could potentially save destroying the car by being able to steer using the aero

You have access to lathe. Have you considered cutting aluminum wheels AND tires. Land speed record holder Bloodhound SSC lathe cut aluminum wheels and tires as one piece to eliminate high speed tire failures due to the insane amount of inertial load on rubber tires You would have to cut some knurls or some pattern to give them grip. That might be the final key to the world record. I think you could use a very narrow wheel because you are relying on a large contact patch for grip. I also suggest using parachutes to slow the car down. You could have it release when you initiate the brakes. That would give you more runway to get up to s peed and possibly a gear that is a step faster on the high end of your runs. I also suggest installing a vertical stabilizer run on the midline of the car from a bout halfway back from the front of the car to the back of the car. I think your wing needs to be the shape of inverted airfoil or airplane wing. That as a smoother wake than a angle flat wing. I also think the vertical end plates are way to large and are causing a lot more drag than you think. I Lastly, i think you need to put some plastic or carbon fiber runners on the underfloor from a line from behind the front tires connecting them to the corresponding diffuser runners.i think you should also install runner on the outer edge of the floor between the front qnd rear wheels to keep as much air possible flowing under the floor. The more air that exits from=m the rear diffuser, the higher the downforce on the car. The mor e air that squeezes under the car, the less air that is owing off the sides f the car causing a loft more turbulence in the car’s wak. I would also measure wind speed and direction before each pass so you don’t make any passes into the wind.

198 is not amazing! You driving that thing at 198 is amazing ! Coming and going 198 lol you’re crazy

Great run Raz! Build looks amazing!

Wow wow, I think so. It is the most fast RC in the world

Just came up randomly, and I have to say, thanks so much, this was awesome

נחמד לדעת שיש ישראלים כאלה מוכשרים

Awesome first run. I hope you set the record next time.

Absolutely fantastic run! 205 soon.🔥🔥

Another awesome build Raz. Looking forward to more action from it. Also happy belated birthday 🥳 buddy.

12000 WATTs O' Mannnn 🤯🤯🤯. These batteries can Run My home for a while 😅

You should get drone shots from above. That would be really cool.

Very impressive, your passion and talent are inspiring . Keep it up!

Excited for you, 198mph for the first run that is awesomely brilliant, great job, 👍👍👍👍👌👌👌👌

Thanks for showing your skillful creativity and awesomely fast creations-and for the excellent links in the description :-)

Ditch the body, and go with a tear drop style, probably gotta make something custom. Ditch the rear wing, at that speed you don't read it. Possibly go with skinnier tires up front. Maybe the AWD is more a hinderance, go with 2wd.

youre the number 1 speed run guy...lets see you get the record

What an adrenaline rush buddy. I thought I was cool with my Nitro Schumacher lol that goes almost 100. And that's fast lol. This was awesome bud, idk much about electric cars. But this was awesome

That windshield shape on the body needs to go. I realize it’s the same body that’s gone 204, but for all out speed, the aerodynamics on the windshield probably slows the car down by a good 10mph. You spend all this time building, why not put a bit more time in the aero?

Instead of driving it to starting point, try carrying it by yourself to starting point to save every tiny bit of battery No idea that it will help or not but it doesn’t cost anything to try it😄

that goes so so fast dude 😲😲

Definitely gunna keep an eye out, gotta custom 6x6 hoping to get 80+ outta it, thanks for some ideas to get there with