Been using the RC-505 for a year now. Still plenty of useful tips in this video. Thank you.

So much relevant information on the RC 505 ! ... thanks a lot dude ;°)

Good video, sure to help many people. I'm confident you already know, there is an option to delete the tracks with a double tap as apposed to holding the button. Thought I would mention this as it is my preference.

Thanks! This thing is sitting here and I’m afraid to use it. Don’t want to screw it up. Your encouragement is great!

This is a newbie question but what wires do you use for the speakers,or what kind do you need?

Thank you for posting this. I just ordered a used Voicetone Synth from Reverb.com because of you! Got it for $158.. don't know if that's a good deal or not, but it was the only one I could find. I also just got an RC-505 and mic, so I'm trying to soak up as much information and ideas as possible. Thanks again!

Thanks for this video! Question: How well does the rc-505 keep loops in sync that have a different length eg. 3 bars and 8 bars (polyrhythms)?

Hey man thank you so much for your very good advices, i have a question if you dont mind, i want to make a pre roll count on one of my track loop like a tempo before, it will help me to play guitare after but i dont know if its possible, do you know if it is? sorry for my bad english, and big up from France ! :)

Can you use a condensor mic with the rc 505? I heard that it's not a good idea, but all that I have is a condensor mic right now. What cheap, but good quality mic would you or anyone else recommend for the rc 505?

Question why does my recording usually the second channel in start over dubbing before I’ve pressed the round pad to end my recording? Thanks

the speed up / down artifact happens in the Rc-202, also. I wish Roland would use 24bit as the TC helicon VoiceLive. The VoiceLive doesn’t seem to have that problem(feature?) , I believe it’s the 16bit sampling that causes the effect. Great info here, btw.

Hello guys I have a question? When I play backing track and I want to put some vocal on the top or instruments and when I press the recording bottom the rhythm is getting faster or slower. Do you know how to fix it even I am in time. Thank you

Hey VJ Franz K. I know that you answer questions pretty much, so I like asking you things, but you know how when your playing a loop and you stop that loop, it cuts the note and the note reverb or delay right off. Say that I want the song to end by stopping it, but it still plays the notes reverb or delay, is there anyway to do that? I know that there is the overdub that will allow it to play through to the beginning of the loop, but I would like to somehow stop the beat or track, and still hear the delay or reverb? I wonder if pressing the overdub button somehow while stopping the track could somehow be possible, but I can't find a work around, and if I go to put those tracks into a daw, I'm confused on how to get the reverb or delay to play out when the note stops at the end of the loop, since it stops automatically on the looper? I know it might sound confusing, but if you can help try to answer this, I'd appreciate it. Thanks VJ.

Which is better, the Boss RC-505 or the TC Helicon VoiceLive Touch 2? Or the TC Helicon VoiceLive 3?

How many layers per track can you overdub with the RC 505 (percussion sounds - for backing track)? Can you save the whole thing as a preset, & latter call it for use at a different tempo?

If i plug guitar and voclas in when i get the beat box going with guitar the beat box starts to cut out and battle for volume. Ever run into this problem?

when i create ideas on rc505 and then lower or speed bpm the loops are RUINED u get what i say? Help ! They get like warpped up or somthing like that. I need to be able to move the bpm of rc505 and keep loops sounding smooth. Cant find solutions

Where in the RC505 is your TC Helicon plugged into?

Hi Frank, I want to buy a new mic, the one you are using is that the Electro-Voice PL 80C?

Hi, I am facing a delay in my mic output in the speakers. I am using SONY V4D1 Speakers to connect my Loopstation output. The rhythm is working Fine. But there is a slight delay in mic out. Any suggestions

You ever try connecting them with both midi ins and outs? You should try it see what happens. I did it with my mpc live and my tempo was runnnnnning away.

this is probably a really dumb question, but how do you play this live without the metronome coming through? i'm playing live on a mixer, with an audio interface, and everything i hear in my monitors, the audience will hear. it appears that if i can hear the metronome so can they - so i'd like to try to figure out if there's anyway to mute the metronome, or if it's intended to somehow route to the monitors while being bypassed in the main ouput or something? or if there's some secret way to get the metronome in my headphone monitors without the audience hearing it (ideal). Thanks so much for the vid!

Could you position the camera to show the 505 screen, if that makes sense?

that glitchy tempo problem shouldn't really be a thing. Im just learning my 505, but to my knowledge the 505 can also be used for recording, if thats true, it is just a matter of turning your sample rate up. Normally 44.1 would sound fine, but if you massively slow the tempo, you're bound to get choppy. Depends what your cpu can handle i suppose

I have a couple spots in my music where I want a crossfader but I'm not abusing my looper like that.. A lil something is ok but fast cutting I just don't trust on it

you didn't tell us how to save all the settings so you can open a new project and have all the saved settings ready to go??

How do u loop and connect the machine to speakers

You said, "If you have a question, ask.". So, I will. Where are my danged car keys? If you can tell me, I'll subscribe.

TC Helicon’s vocal preamps are sooo much better than the 505. I use a Voicetone HarmonyG-XT. The basic vocal “Tone” on the TCH G-XT is smooth and pops the vox over the mix.

from 1:17 to 1:54 i felt like i was breaking through