RC Chinook Bicopter - Part 1
Рет қаралды 815,884
Күн бұрынCould this be a budget way to build a flying model Chinook? Using the bicopter method of stability and control, the complexity of the Chinook should be able to be greatly reduced over using two full helicopter rotor heads. As mentioned, bicopters aren't anything new and I've been wanting to build this for a number of years now. Thanks to you guys, I'm now able to build what I want!
Support my videos via Patreon: / tomstanton
Sponsored by 3D Printz UK: 3dprintz.co.uk/
----------------------------------------------------------------------------------------------------------------------------------------
Huge thanks to the following Patrons for supporting me:
Anthony Losego
Justin Carroll
mcfets
SCHERR Nicolas
Alper Bahçeliler
Pierre Retief
International Schools Database
Marc Urben
lakshay anand
Jens Schwoon
Anders Wangensteen
Ted Blue Courage
greg cordray
Peter Sripol
Mark Muir
craig rasch
Dave Joubert
Bernard Gauweiler
Zoltán Vér
Horseman 3381
Nam Nguyen
Alex Birkett
Johan
Aner Nitsan
Felix Weißig
Lars Nielsen
Charlie Barker
Teodor Macarie
Christian Meinhardt
Brayden Dyck
markus
Adam Lomax
Carl Richards
david shore
13712143041
Hadley Boks-Wilson
tim prigg
Elliot Wilson
Derrick TYLER Wengerd
Dick Blumer
Marcel
Stig Vikström
Aaron Neman
chris mims
Dwayne Myers
Ernesto Morales Hernández
Ron Jelley
William Culliford
Darren Bartz
Christopher Ong
Evert-jan Klooster
Zachary Eason
Travis Seip
Nathan Evans
magnus stig bruun rasmussen
matt minjarez
Shaan Patel
Robert Persson
Gary Ferguson Jr
Jens Heuschkel
BoerniTheWorm
Tom Gourlay
Pieterjan Roose
GreekGadgetGuru
Ethan Turner
Yohann
cassarino
alex
Christian DeHoyos
Ayman Karam
Silvan Kolk
Lyubomir Shumkov
Nico Winkelsträter
Jordan Lucey
Woods
Dennis Curry
Luca Lu Miccoli
Matt Bryan
Cody Blotske
Kobault Films
Jonas Christensen
Michael Ruggles
Thomas de Fretes
Darcy Snell
Chris Hawkins
Richard Stegall
Tanner Fanguy
scott hammond
LE Scott
Tobias Starke
Josh DesRoche
Zeren
Jake Ward
Marc Aymerich
Pablo B
oliver gould
Jo Boiteau
Benedetto Carta
Prashant Sharma
Harrison Covert
Claude Kennedy
Eric Johnson
Jean-Louis Cornez
Atle Grelland
Sergio Di Ventura
Michael Leung
Ioan Hill
Austin Levy
Don Moloney
Jeffrfey Gwin
Zak Tues
Jack Forbes
Brennen P
Steve Erickson
Pawel Thirtytwo
Karl Perron
Janne Sarvi
Jacob Maddie
Liam Tidwell
Lucas Di Pentima
Jesse Smith
Landon Lively
Michel Otremba
luke dunbar
Taylor Roysdon
Layton Nelson
Wanja Döring
Michael Young
Tommy Karlsson
Charlie Bruce
Tristan Babcock
Claudio Mastìo
David Foster
Aitor Terán
Thimios Bilalis
Michael
Jiang Aihe
God-Emperor Jackson
Charlie TheHarle
rudolf tanguy
Alex
John William Cole
Connor Weller
Daniel Sköldengen
Floydd Gartman
Mads Rudolph
David Müller
Zachary Hudnall
Richard Walker
Nathan Frost
Ben Cook
Javier B
Andoni
Martin aus Tirol
Riley Penegor
Ashleigh Peacock
Charlie Garcia
Jahn elkink
Jerry coleman
Fred Pfost
Brian Bak
stuart sharp
Michael Vennard
Adolph Janssen
Sebastian Orskaug
KRCNZ
Edward Chew
3D Printer filament sponsored by 3D Printz UK: 3dprintz.co.uk/
My Other Equipment:
Main camera - amzn.to/2vlvlC6
Main lens - amzn.to/2gMrhru
Main tripod - amzn.to/2tqRjBt
Secondary Tripod - amzn.to/2t1NkMh
Microphone - amzn.to/2uuv9n0
Audio recorder - amzn.to/2v3mjcG
Banggood affiliate: www.banggood.com/?p=LT0710618...
----------------------------------------------------------------------------------------------------------------------------------------
Other Social Media Links:
Instagram: / stantonfpv
----------------------------------------------------------------------------------------------------------------------------------------
Song: Oshóva - Chilling (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Oshóva - Chilling (Vlo...
@mrstocks 6 жыл бұрын
I love your videos, informative, easy to follow and you articulation is wonderful.
@TomStantonEngineering 6 жыл бұрын
Thanks!!
@syrus3k 6 жыл бұрын
Couldn't agree more. I'm not really into any of this stuff but I find your engineering skill and videos amazing! Just really really interesting stuff! Great fun. Cheers
@RobinMario 6 жыл бұрын
Everything he said 👆🏽
@user-wx3ko3ik8c 4 жыл бұрын
ㄴㅇ고스톱 ㅜㅏㅏㅡ
@whitebeltforlife 3 жыл бұрын
agreed
@gorden2500 6 жыл бұрын
at 1:10 "can barely bend it" rollingshutter effect: "Hold my beer"
@leeandrew9772 4 жыл бұрын
its rotating a camera so fast the object is looked like a bend object
@thetruthexperiment 4 жыл бұрын
My brain completely tuned that out.
@gorkemgulan 4 жыл бұрын
Haha yeah
@gorkemgulan 4 жыл бұрын
Like a twist even
@graealex 6 жыл бұрын
Maybe you could include the parts you're using, i.e. motors, servos, controller board and controller software name, remote control in the video description.
@embretr 5 жыл бұрын
Very obvious amazon referral stuff.. 🤔
@rcpi9336 6 жыл бұрын
I'm really liking this style of videos! Keep it up :)
@AaronSpielman 6 жыл бұрын
Agreed!
@mahocnc 6 жыл бұрын
Me too!
@johndemari2025 6 жыл бұрын
Same!
@Osmanity 6 жыл бұрын
Yeah i agree, but i want more information about how he connect the parts like flight control.
@SunriseKnight 6 жыл бұрын
You will be gold in the aerospace world. I was just like you 5 yrs ago and now work at a large aerospace company. I wish more engineers had a background like us.
@VonRippin 6 жыл бұрын
Very well structured video. The perfect amount of detail for those who are knowledgeable of DIY RC to know exactly what's going on, but I completely understand the appeal of going into further detail and analysis. Ignore those who are upset that you won't be test flying until next week's video, great things take time!
@mikemarshall9470 6 жыл бұрын
Spent 14 years flying the CH 47. They are very unstable and use 2 AFCS systems to help to stabilize. The swashplates do tilt forward automatically as the aircraft accelerates to help level the fuselage which reduces drag in high speed flight (170 kts).
@joshuarosen6242 6 жыл бұрын
The thought process and the trial and error in the build are really interesting to watch. It makes a pleasant change to see intelligent content that focuses on engineering alone. I shall now watch the next part.
@Del350K4 6 жыл бұрын
I must say, Tom, that I love the way you go the extra mile - the little professional touches such as the inclusion of the CAD drawing @ I:20 complement the high quality in terms of projects undertaken and concise, informative explanation which I´ve come to expect from you.
@MrIcemanuk2007 6 жыл бұрын
Great videos Tom! I love watching them!Can't wait to see it fly!
@Fpvfreaky 6 жыл бұрын
Cool. I love that cr-10 printer. And it’s one of my fav helicopter aswel. Hahaha thanks
@brianb-p6586 Жыл бұрын
Although I had not heard of bicopters, the principles and how they apply to this tandem configuration were apparent in the first minute - nicely done. 🙂
@thinkhelpservice 6 жыл бұрын
This is one of my favourite subs, great content and a great presenter - down to earth and mild mannered
@blair.nichols 6 жыл бұрын
Another great video! Keep up the hard work, cant wait to see this fly.
@GodsCorruptible 6 жыл бұрын
Excellent project, can't wait to see the next part!
@chriscapps2097 6 жыл бұрын
Oh, this is an awesome project! Thanks for sharing.
@mousiekebabs 6 жыл бұрын
I've often though of a build like this. Great video as always!
@fpvdesign8046 6 жыл бұрын
Looks awesome! Can't wait to see it fly.
@Devoider 6 жыл бұрын
I Like this format!
@Rouverius 6 жыл бұрын
Thanks. I like this new format.
@wutzitrone4522 6 жыл бұрын
10:01 second and no extra ads. Something very satifying to see:) Also:KEEP THIS PROJECT ALIVE! I look forward to next friday. You deserve the extra money for more videos. Mkre videos= more views from already subscribers and the algorithm might like it;)
@normanmendonca2834 5 жыл бұрын
Excellent job, i cant wait to see it finished.
@gikar1948 6 жыл бұрын
Such a good video and an awesome project. Thank you for the detail on the build.
@MCsCreations 6 жыл бұрын
Sweet! Looking awesome already! :D
@gryfandjane 6 жыл бұрын
Fascinating project, Tom! I'm looking forward to seeing how it performs. Cheers -
@ISOAwe 6 жыл бұрын
This looks awesome, keep it up! I love bicopters
@paulriggs42 6 жыл бұрын
Nice one Tom ! Keep the videos coming !
@DodgeDitchburn 6 жыл бұрын
Brill! You do all the stuff we dont have time to tinker with haha cant wait to see the results!
@StonyRC 6 жыл бұрын
Very nice concept and EXTREMELY well presented.
@dickaldor 6 жыл бұрын
It´s lovely so far, thanks for sharing mate! Subbed right away!
@robotslug 6 жыл бұрын
The videos you make are very interesting and definitely getting better as you go. I liked this format a lot, just throwing my vote out there.
@Rando104854 6 жыл бұрын
Can't wait to see that bad boy fly! Looks great, really enjoy your videos. Keep up the great work. Happy flying. 👍🏻
@MrNursi 6 жыл бұрын
This looks an interesting one Tom, I love the details and the way you work through them. Off to Patreon now :-)
@sakibian01 6 жыл бұрын
I loved this. Great job man!keep it up 😍😍
@TheTurtleOfGods 4 жыл бұрын
Video incredibly informative, I'm working on a drone now you inspire me!
@jamiemink3379 6 жыл бұрын
Awesome video! Well done!
@maxmoore3981 6 жыл бұрын
Awesome idea. I'll be following this build. Hope it all goes well.
@bringamosa8480 6 жыл бұрын
Looking good, looking forward to next weeks video :)
@notmyworld44 5 жыл бұрын
Extremely interesting channel discovered by accident. Glad I did. Subscribed.
@dorsai 6 жыл бұрын
Looks outstanding. Good luck with the rest of the project.
@RandellMonaghan 6 жыл бұрын
Another great video blue, keep it up.
@Dav2112 6 жыл бұрын
Awesome channel you have mate, really interesting projects.
@crispy-k 6 жыл бұрын
Great vid great build, looking forward to see it fly ;)
@slimigan 6 жыл бұрын
Can we please all agree to say Chinook "SHIN-OOK"? Ok good, that's a relief...
@lvitntnmrcls 4 жыл бұрын
slimigan it was driving me nuts too
@andrslnks4804 4 жыл бұрын
Like you would pronounce Porsche. Like Porsch, without anything behind the SCH
@DMSparky 4 жыл бұрын
@@andrslnks4804 I thought the Germans pronounced it "Porsch Ah"? Also can confirm being from an area where the indigenous Chinookan people are from it is indeed pronounced Shin-ook
@andrslnks4804 4 жыл бұрын
@@DMSparky No. Its an E. Not an A. Hard to discribe how it sounds. Look for german Videos with a Porscheeee. Never just Porsch. Greeds
@mazda3mike 4 жыл бұрын
@@andrslnks4804 por sha. There you go
@happypants555 6 жыл бұрын
Very entertaining video Watched the whole thing :)
@eliglbe 4 жыл бұрын
Brilliant,had to subscribe
@moineagu1 2 жыл бұрын
Brilliant project congratulations.
@Fritschge128 6 жыл бұрын
Great video, Thanks!
@pteranodon3946 6 жыл бұрын
Love your project and how you present it. Subscribed.
@tolga24 6 жыл бұрын
Another brilliant idea mate :) Thanks for sharin'...
@shogunemperor 4 жыл бұрын
Brilliant mate!!!! Great job!!!
@GrandadIsAnOldMan 6 жыл бұрын
Great video, great project 😊
@antonis476 6 жыл бұрын
Cannot wait for part 2!
@lazzybug007 5 жыл бұрын
You are awesome I'm looking forward to more awesome stuff from you.
@peterwebster3076 6 жыл бұрын
hi tom looking like a great project as soon as I got the notification for the video with the word Chinook it immedeiately got my attention as that helicopter is my favourite all time heli im a crazy fan of all helicopters so cant wait for the next video peter west mids
@Tech2K 6 жыл бұрын
i could make you a rc chinnok for 150 usd -120 gbp with body shell
@AlexJoneses 6 жыл бұрын
I love how autocorrect misspelled your name
@finecutpost 6 жыл бұрын
Tom I love the way you edit your videos
@Acheiropoietos 6 жыл бұрын
Terrific stuff!
@SteveRazgriz9057 6 жыл бұрын
Shin-ook, grew up around the real thing, keep up the awesome work.
@BruceCarrick 6 жыл бұрын
Looks very cool. Can't wait to see final product. But whats going on at 8:15.....looks like the forward motor has a mind of its own.
@TomStantonEngineering 6 жыл бұрын
It seems that when the PID gains are too high, the motors tilt when spun up on the ground. I think the vibration causes it to drift and it doesn't self centre because it's 'fighting' the ground. Thanks!
@BruceCarrick 6 жыл бұрын
Thanks! Your videos are not only entertaining, but incredibly informative. Cheers!
@RCP-1136 6 жыл бұрын
maybe a too high or low I (integral) value
@michaeldilger9582 6 жыл бұрын
Yeah, my racing drone does a similar thing if you take the props off and start it on an un-level surface when in angle mode. the motors all start at about the same arming speed but eventually the lower motors will accelerate to full throttle. with the props on, this will simply level the craft more efficiently. I think this is because of air mode?
@rishabhtolia4570 6 жыл бұрын
I liked it that you started putting videos in parts. This makes me more curious for the next video so i loved it. This is probably good for you as well, i guess.
@customfabrications 6 жыл бұрын
This is cool. I made a ‘chinook’ a few years ago by combining two blade cx2s together. It actually worked better than I thought it would, but yours should work even better. I know it’ll look better than mine did.
@stressballer 6 жыл бұрын
One video every week? COME ON! I WANT PART TWO ALREADY!
@OutdoorsandFire 6 жыл бұрын
Awesome stuff!!!
@asaddamemer7272 6 жыл бұрын
Your videos are very good
@darrelcdammann 6 жыл бұрын
That's actually pretty cool 👍
@anlpereira 6 жыл бұрын
Waiting anxiously for the next video. Tks
@richarddowner4292 6 жыл бұрын
thumbs up! I can't wait till part 2... plus I subbed, thanks..
@bobbobbington1132 5 жыл бұрын
in case you haven't run across it, and no one has commented already, the CH-47 Chinook (pronounced shinook) has a main drive shaft which connects the front and rear rotors. the two turboshaft engines turn the drive shaft, and the drive shaft in turn drives the props. The drive shaft is a critical design element, as it keeps the rotors synchronized, and prevents them from colliding with each other in flight. One of the most dangerous situations in the Chinook is if a tool gets left in proximity to the drive shaft after maintenance. One such incident nearly sheared the drive shaft in two just by scraping on it while in flight.
@wattage2007 6 жыл бұрын
Nice hammering together edit. If only it was that quick!
@abgehn7869 6 жыл бұрын
Great Video :D I'm realy looking forward to the "in deepth videos"! great idea
@MrFurriephillips 6 жыл бұрын
Keep 'em coming kiddo!
@whitebeltforlife 3 жыл бұрын
You're the man!
@ollymaddocks 6 жыл бұрын
These videos are great 👍
@tessa7468 6 жыл бұрын
love it dude!
@dinozoff7161 6 жыл бұрын
Very nice video!
@bjorn336 6 жыл бұрын
you are a legend man
@ChipEstrada 6 жыл бұрын
Very nice!
@jwc4520 2 жыл бұрын
Ah looks good so far. Printed out the plane awaiting confirmation spars ....mail ...can't say I understand all of it , but at 72 it's fun to learn something new.... shouldn't be hard I have forgotten enough to make room for something new ...lol Take care.
@droner5423 6 жыл бұрын
Great project
@PixelFPV 6 жыл бұрын
Super cool! I also love how you're using a RF board but have Betaflight installed on it ;)
@kamilkosi9101 6 жыл бұрын
Great job!
@Vuzin 6 жыл бұрын
Can you give me any tips on using PETG with the CR-10 printer? I can't seem to get it to work, way to stringy and pops off the buildplate or itself.
@bob3225 6 жыл бұрын
Can you leave a link for all the electronics you used ? cheers
@scalercheli 4 жыл бұрын
Well done I love your CH-47
@ronaldnederveen3690 6 жыл бұрын
can't wait till part 2
@ladraode9dedos409 6 жыл бұрын
Super cool!
@dis3nchant3d42 6 жыл бұрын
Aaaggghhh I need to see it fly!
@neilredelinghuys3263 6 жыл бұрын
Never thought about a helicopter like this before.... A flying stick of aluminium! Can't wait to see it fly. Great work so far!!
@andrslnks4804 4 жыл бұрын
Amazing how fast he assembles the chassis.
@excellenceinanimation960 2 жыл бұрын
Is there any way you could post information on how you got this configured in beta flight? Iv got a prototype build but I’m really struggling with the software and getting it configured as a chinook bicopter in beta-flight. I think my ESCs and not the best they won’t bind they just beep.
@pegroj 6 жыл бұрын
Excelent format
@lukasmakessomething7322 6 жыл бұрын
Looking forward to part 2
@odinnfpv8238 6 жыл бұрын
interesting build. you could go with an digital servo (not looked at what you are using) and solder on a 4th cable so you get an feedback from the servo to an rssi or reconfigured current pad. that way you fc always know the servo position and you get better controls. I use that type (Bluebird BMS 210) with an feedback on my tricopters so I could tune all in Betaflight.
@youpattube1 6 жыл бұрын
I like all this vtol stuff
@ConsultingjoeOnline 6 жыл бұрын
Awesome. Would be great to go over how u adjust ur pid values to dial it in. Thanks
@AllSkiCasino 6 жыл бұрын
Love the video! Do you have a link to the flight controller you used for this?
@jojoray 6 жыл бұрын
@Tom Stanton What software did you use to program the main controller board?
@logo600se83 3 жыл бұрын
Is there a dump of how you configured your fc? Im building it but have trouble with setup the mixer 👋
@nutrox84 6 жыл бұрын
Epic project! Hope stl´s will be available later on :D
@wildside4822 Жыл бұрын
Hey Tom, would you know what kind of flight co troller you used or reccomend an alternative ie. General purpose one on a budget
@kentherapy7022 2 жыл бұрын
6:54...For driving angle of engines I recommend 2x longer (maybe 2,5x) lever against servo lever. Also should by better using spheric brass/plast joint. On all 4 point. In this cause you can used higher sensitivity of gyro and any inaccuracies in engine tilt will be much less. Also servo will have bigger power for flywheel resistance. The sensitivity range of the gyroscope will be used in a wider range. This means more data per angular degree. Self-stabilization will be even bit faster and mainly much more accurate. Any way, one from best video on this theme.
@excellenceinanimation960 2 жыл бұрын
Is there a way to get information for the setup of this in beta Flight? I’m just unable to get mine to work. Iv purchased a kk2 board to get it in the air but it’s really anoying me that I can’t get my revolt v2 working!
SRS-RC
Рет қаралды 25 МЛН
Comedy Club
Рет қаралды 6 МЛН
Fabiosa Animated
Рет қаралды 5 МЛН
Sameer Gaming
Рет қаралды 2,5 МЛН
Rj Mobile 01
Рет қаралды 12 МЛН