RC Gearing, Speed, Pinion & Co - SPEED UP YOUR BRUSHLESS CAR

Рет қаралды 459,489

8 жыл бұрын

RC gear ratio, pinion, spur gear and speed adjust of your RC brushless car using this easy Excel tool for free DOWNLOAD.
Consider the speed is estimated based on KV of the brushless motor without any load. For very high speed it might be necessary to replace some electronic parts.
Download this Excel file here: www.bolospeed-rc.com/download/...
Any likes, comments and subscribes very welcome!
Thank you & see you soon!
Fig Leaf Rag - distressed von Kevin MacLeod ist unter der Lizenz Creative Commons Attribution license (creativecommons.org/licenses/...) lizenziert.
Quelle: incompetech.com/music/royalty-...
Interpret: incompetech.com/

Пікірлер: 151

@jackwhite2037 7 жыл бұрын

Perfect! I've been trying to do this, do that, remember it, forget how I figured this and that, start over, repeat... Now I have your spreadsheet. Thank you so so much!!!

@andreas.charalambides 7 жыл бұрын

such huge amount of info in just 3mins! thank you !

@arrondavis835 6 жыл бұрын

Appreciate that! Very Helpful. Need more vidoes like these or a chart👍

@JimRyan-AKA-Pigeon_Kicker 5 жыл бұрын

Calculations were good enough for me. Thanks for the video. Shared with my MeWe RC group.

@robdogboy78 8 жыл бұрын

Thank you so much for the excel file, it's helping tons

@hattichya 4 жыл бұрын

Really needed this spread sheet. Thank you very much!

@RoosterRC 8 жыл бұрын

Danke für den tollen Download!

@bullit1973 7 жыл бұрын

Very nice ! great worki'm a noob, so i appreciate detailled explanation :) thank you

@FarmPrepper1 6 жыл бұрын

Gotta Have this program, amazingly it does the same thing for RC that My Bully dog does for my Chevy in gearing final drive and speedo computations, Most excellent indeed!!!!

@DraJ_35 7 жыл бұрын

Thanks for doing this really thank you :)

@TonysRcTechboom 6 жыл бұрын

Great video brother great tips . I've liked and subbed you my friend because I think I can learn alot from your videos well done ✌👍✌😁

@sleepyheadsleeps9134 2 жыл бұрын

Thanks for this,very useful.

@joaoaraujo8081 7 жыл бұрын

Awesome, guy!

@JSM991 3 жыл бұрын

Awesome 👏

@michaeldalton7511 4 жыл бұрын

Thank you!!!

@Poolboybob 7 жыл бұрын

idk my traxxas slash 2wd trans gearing. i converted over to brushless so was origanaly was geared for the xl-5

@sam97eck 5 жыл бұрын

Great video and I have subbed to your channel

@SPEED-7 8 жыл бұрын

thas was very handdy.nice work and info sharing.😄

@BoloSpeedRC 8 жыл бұрын

+SPEED TUJUH Thank you! Your welcome

@JoelMannerino1 4 жыл бұрын

Its fun playing with the options i have clicking on the link. I have the potential to hit 81.38 mph with a set of gears and tire sizes i have... or i could go full torque and gear down to 47.58 mph and a baby tractor pull lol! THUMBS UP AND SUBBED

@HowToDIYRc 7 жыл бұрын

great intrusion video awesome stuff great channel Sir :D

@camperjobs9879 5 жыл бұрын

Thank you very much for the calculator 👍👌10+

@tstricklin4808 2 жыл бұрын

So it works for you? I'm usually leary of stuff like this but was looking for comments about anybody else who has already done it ,I think I'll click it 😁✌️

@MrAlexsasax 7 жыл бұрын

Wow! Great and very useful video. Those gears looks good. Can u post link for these two please? Thanks

@trisnosaputra5496 6 жыл бұрын

Mkash mas udah di kasih tau

@RCRoads 2 жыл бұрын

This is great. No more guess work. You are awesome man. 👍⏲

@abdullahq5925 4 жыл бұрын

very good , like

@earthisacube_lul 6 жыл бұрын

Hey man, geiler dunefighter von conrad😉

@esaskhan95 6 жыл бұрын

This is hardcore stuff

@EdwardFuAl 7 жыл бұрын

THANKSSS!!! XD

@chrisgordon446 6 жыл бұрын

I have a L969 termanater, my question to you is how many gears should I get for it to go faster. Or what kind of battery and gears to use for it.

@TheRCBasher69420 5 жыл бұрын

you need to do a running video of it

@testaccount-customername9160 8 жыл бұрын

thank you for this !

@BoloSpeedRC 8 жыл бұрын

Thx for watching!

@a.l.6429 7 жыл бұрын

BoloSpeed RC

@BUrbbable 7 жыл бұрын

๖ۣۜ༻Ŧнє MODELISM MASTER ༻ not for long no :)

@steveb-vc5ze 7 жыл бұрын

what is the best gearing for 7700kv for a vettera v100

@blockmixer3215 6 жыл бұрын

Hi! Woher hast du denn das Hauptzahntad? Es sieht nämlich schön massiv aus.

@hubertmonin6916 7 жыл бұрын

Hello, your video is very helpful. Thx a lot! Your model of Spur Gear seems very good but where do you buy it please ?

@adarighofuafestus2917 6 жыл бұрын

Hubert Monin good

@Renegades43 8 жыл бұрын

I'm having a very hard time finding the diff pinion gear and diff ring gear on my arrma vortex. Does arrma cars not have these ?

@NateHarrisCreations 5 жыл бұрын

Nice program but what if I’m using a hot racing solid spool? There’s no diff gear ratio to input

@Dimas-de8mi 5 жыл бұрын

Friend! And how to calculate the speed if the spur has a two-stage structure?

@SilverDragon33Productions 6 жыл бұрын

How would this sheet apply to an old evader st with a 23T/48P Pinion 78T/48P Spur Gear 18T/48P Top Gear 29T/48P Idler Gear and a 48T/48P Diff Gear? 2S Lipo 3900KV Brushless Motor?

@civicfd4434 8 жыл бұрын

hi i have a 15tooth steel pinion gear with a 48tooth steel spur gear in my buggy.question is that the width of the pinion gear is wider than that of the spur.Therefore,do i sit the pinion in the centre of the spur gear or should it be flush completely with the spur? thanks for any help rendered! cheers!

@yfellimban 5 жыл бұрын

I would go with the center.

@tstricklin4808 2 жыл бұрын

Center it 4 shure, if you flush mount it, under load if the armature happens to move alittle vertically you may not have full mesh allowing penion to rip teeth out ✌️

@KrecikPolska 8 жыл бұрын

Hi can you tell me? which model you have mounted instead of original relly dune fighter spur gear and pinion ? where you can buy these metal gears? you give me some link? thank you

@limpopimpo9065 5 жыл бұрын

Vďaka, super app

@bushchooken441 5 жыл бұрын

Does anyone know the model and brand of the vehicle shown here? I have exact one but I got it second hand and have no clue what it Is.

@fredstraza9232 4 жыл бұрын

I have an arrma senton 4x4 Mega and put in the Traxxas Velineon 3500 brushless motor with matching ESC brushless in it and it won't stop clogging what should I do

@sleepyhallows3681 4 жыл бұрын

What if I told you this is my exact setup in my RC car 4 pole 2150VK 6s 160amp ESC 😍 she rips and I clocked it at 100+Kmh I haven’t been able to send it flying yet because I’m scared lol this is my first RC car and I built it for speed off-road and on road 🤗

@pangarerc 6 жыл бұрын

Awesome BoloRC, I include in my chanel a video explain your video/sheet. After i send to you. I have a suggest to you. include in your sheet a delta temperature, It is not difficult use one motor analyser. Tks see you!!

@i5usko 7 жыл бұрын

What about acceleration

@nickwilliams6869 Жыл бұрын

What is the deffrence between 16t and 19t

@filmdizimuzicmaratonu7162 6 жыл бұрын

waaooo good wryy

@morganites5659 5 жыл бұрын

Put the big one on the moter and the small on the spur plzzzzz

@MNimsy 5 жыл бұрын

Hallo, welche Übersetzung von Motorritzel und Hauptzahnrad für die geringstmögliche Geschwindigkeit ist bei Reely Dune Fighter 2.0 brushless möglich?

@calmer2015 6 жыл бұрын

Hi, please give me your spur gear and motor pinion gear specs.(maybe ebay link etc) I want to try these out. My spur is plastic and runs out very quikly. Yous looks like metal and much wider.

@digeolrc8586 3 жыл бұрын

What application do you use for get illustration speed?

@nikoklein8073 3 жыл бұрын

So I'm a no it to buy a 5400KV motor and I was wondering what gearing should I use

@Shad0w86 4 жыл бұрын

Liked and subbed, cheers for the chart too. I Have a hobbywing Max 6 ESC, 4985sl 1650kv brushless motor. Atm with a 48T spur,17t pinion. 10t bevel small and 40t bevel. How far can I upgrade without frying it? In 1/8 6s truggy

@maliekbennett2081 4 жыл бұрын

How do you learn the dimensions of the spur, tires, and pinion?

@janoschkaffka102 4 жыл бұрын

Hallo Bolospeed Welches Hauptzahnrad Modul 1 hast du genommen was auf die Welle passt und wieviel Zähne hat es.

@melvinsmith7988 4 жыл бұрын

What mod is the pinion gear?

@locostse7en 3 жыл бұрын

Yo I want that calculator but link is broke it's. Really good xx

@troyflanagan173 4 жыл бұрын

I have a 4x4 Ruckus Truck its brushless and has a 3300kv ABC TAZER Motor WITH 2 COOLING FANS AND a 5000mAh 100c 7.4 Battery in it looking to get later on a 4000kv Motor WITH 11.1 Battery put in it

@melvinsmith7988 4 жыл бұрын

What model rc car is this i have one just like this but i don't know the model?

@cod7199 9 ай бұрын

do you still have that excel file?

@trisnosaputra5496 6 жыл бұрын

Bro namanya apa yab kalau biat mobil remot dinamonya

@sayayo9108 4 жыл бұрын

Whats the apps in phone?

@tapas1505 4 жыл бұрын

205 Kmph. Thats just insane.

@scorpions83868386 8 жыл бұрын

very helpful file,thanks .but i tried to calculate my hpi savage speed using this ,it shows ridiculous speeds like 100++km/hr which is not even close to what i m getting on track.

@but531 7 жыл бұрын

What kind of track ? dirt ground ? asphalt only ? asphalt with rain ? poor quality asphalt ? mud ? And also depends what electronics you have good quality cheap quality how old is your battery you charge fast the battery or slow. How much C discharge is your battery. You must make some speed runs with no wind in very straight road with no uphill or downhill. You play in hot weather very hot weather cold or very cold weather ? Each parameters and all together play their roll in the total amount, so remember all those parameters and you will take different amount each time. When i was playing with my nitro engine an rc store told me that an engine with the same settings gives you different amount on cold weather and different amount in summer and of course different temperatures every time. Exactly the same is with the electric rc models. Also when you play with your rc model in track or in freemode runnings you have different temperatures each times and different levels of pushing in your rc model.

@ronaldbaker4074 6 жыл бұрын

App name can't find it ????

@aneksolkosoom1265 14 күн бұрын

Can you up link load Exell file again ,Thank you now can't load

@gabrielecolleo5202 6 жыл бұрын

hi.. i dont have a lipo battery and a brushless motor...how can i measure my speed with a brushed motor and a normal battery?

@6.0hh19 6 жыл бұрын

Gabriele Colleo u aint living then most yours is going is 30 max

@klab3929 7 жыл бұрын

could of made it much faster if u switched the gears that connect the drive shaft with the motor

@chinaoreo 5 жыл бұрын

How do I download this onto my iphone x..? I hit the bolo speed download link.. and It brought up a page but nothing is adjustable..?!? Thanks

@Edgerunner197 5 жыл бұрын

Chinaoreo iphone x is trash= should have got note 9, fuck off you show off.

@chumps7974 4 жыл бұрын

My motor is rated in turns, how can I convert to kv? I also know my drive ratios, do I still have to count gears?

@sonyadiputra6162 4 жыл бұрын

Same too ,i dont know what kv at my dinamo

@kevinkent3067 Жыл бұрын

I'm a little late to the party here, but the download link is not working for the calculator. Is there any way you can send me the link?

@joshgreene5417 4 жыл бұрын

Does the math change if its a 4x4?

@marcbrmn1052 8 жыл бұрын

Very interesting, fan we have the excelle file

@BoloSpeedRC 8 жыл бұрын

+Marc Borremans I'm glad, nice, thank you!

@gayahtahir5089 2 жыл бұрын

app??

@vapingbeast879 7 жыл бұрын

u got one for brushed

@modelnutty6503 7 жыл бұрын

I hear ya, but it's "YOYO" (you're on your own!). listen for 75-80% of no load rpm's when it's full throttle is usually a happy start point, add or subtract pinion teeth for longer or shorter tracks ("legs vs snap") and check motor temp at 4 minutes. if you cant touch it 4-5 seconds you're geared too darn high! it's not very "tekky" but I've been doing it like this 30+ years with electric cars and boats.

@sparktite 7 жыл бұрын

I dont trust the DL link for the excel file can some one vouch for it or convince me its safe? pls

@TrollgoneGamer 7 жыл бұрын

It's legit so far. Nothing more than an Excel-file.

@mzgreengarage6721 3 жыл бұрын

cannot download the excel

@FLYGUYFOX 8 жыл бұрын

quick question I have to serpent buggy 811 with the 1850 KV motor 120 amp ESC I'm trying to set this up for drag racing what gearing should I use 4S capable

@BoloSpeedRC 8 жыл бұрын

+RALPH FOX Hi, I cant give you exact gear ratio but i think you have a lot of torque with your combo und you should try different pinions. You can get better acceleration not only using different pinions. Good RC contoller, good esc, short and big esc wire, good big lipo/esc connectors do it too. The serpent buggy is good RC car for RC tracks. What distance do you want to drag race?

@FLYGUYFOX 8 жыл бұрын

+BoloSpeed RC yes I want to set this up to drag race

@BoloSpeedRC 8 жыл бұрын

+RALPH FOX Lock all diffs. Need very high grip tires. I think when you reach brutal acceleration you will need wheelie bar. Have you tried allready something? What is the spur and pinion gear now?

@FLYGUYFOX 8 жыл бұрын

+BoloSpeed RC I just found out I'm running 46 spur 20 pinion

@SchaeferMenk 7 жыл бұрын

BoloSpeed RC

@jordanbarnes9510 7 жыл бұрын

good to see you have to take your entire truck apart

@ELValenin 4 жыл бұрын

Wtf? Just look up the transmission setup on the internet

@tstricklin4808 2 жыл бұрын

Link won't work for me

@CCuber98 6 жыл бұрын

What formula is used in the Excel file?

@herber1 6 жыл бұрын

Gear ratios fórmula

@BundaNisaOfficial 5 жыл бұрын

@alfanugroho8551 6 жыл бұрын

Where can i download this application

@brich2929 4 жыл бұрын

kzfaq.info?redir_token=tsF5f_rX_fNLAAqDCEAyMNjwJ3V8MTU3NDQ5MDIyMUAxNTc0NDAzODIx&v=u6fnBWtDFP0&q=http%3A%2F%2Fwww.bolospeed-rc.com%2Fdownload%2Fbolospeed_rc_calculator.xls&event=video_description

@bombshell31600 7 жыл бұрын

nice vid.... if you could talk... and do a music vid :/

@speedrungermanyodwk 2 жыл бұрын

App ? Mit freundlichen Grüßen

@alex2alexandry 8 жыл бұрын

nitro engine?

@MATEKYOO 4 жыл бұрын

You can measure the rpm of the motor

@trisnosaputra5496 6 жыл бұрын

Kalau beli dinamonya caranya gimna ya bro

@ardianmaulana5356 6 жыл бұрын

Trisno Saputra dibukalapak ,tokopedia bnyak

@anthonymacaluso1488 5 жыл бұрын

That is the filthiest diff I've ever seen in my life

@trippyxdog940 4 жыл бұрын

Why don’t you just use a small sprue gear and a bigger gear connected to the motor for more rpm

@rubengotz6776 7 жыл бұрын

Where did u get that steel spur gear i need one ,too but i can't find one

@ELValenin 6 жыл бұрын

Ähhhh er kann auch Deutsch. Aber mich würde das auch interessieren

@djbuknard 8 жыл бұрын

I have the same Dakar RC. where can I buy the upgrade gear and which battery would you recommend? Thank you

@BoloSpeedRC 8 жыл бұрын

+Nicholas Byrne-Chinn Hi, its not easy thing with the metal gear. Search "SSA Modul 1" 36 or 40 T. 40T dont fit and you need to mill the chassis plate. 36T fits but for reasonable gear ration you need pinion about 9T.

@BoloSpeedRC 8 жыл бұрын

+Nicholas Byrne-Chinn I think Lipo 2S 4000-5000 mAh and 35-45C works well

@marcuslyons7233 7 жыл бұрын

put the wrong kv in

@N3m3sis439 6 жыл бұрын

Marcus Lyons Nope ,Dunefighter Brushless hat 3560KV !

@user-dz2jv4in5z 6 жыл бұрын

Marcus Lyons No he didn't..

@killerfootball1012 6 жыл бұрын

bigger pinion makes it go faster.... not vise versa

@WERONEfishing 4 жыл бұрын

why the music no in depth explaining sorry bro

@coltonrooster 2 жыл бұрын

No see. You will burn motors and tear through gears. None of this makes sense from an experimental standpoint. However, it's a good reference guide if you have a good understanding of the material that you're installing.

@vojtechwolf7667 8 жыл бұрын

Ich möchte fragen, wo man den Körper gekauft.

@BoloSpeedRC 8 жыл бұрын

+Vojtěch Wolf Look here, the body is self made: kzfaq.info/get/bejne/g7VnY8V418qWYIk.html#t=00m54s

@vojtechwolf7667 8 жыл бұрын

+BoloSpeed RC Thank you but I have a plastic body shell. And I do not know where to buy your here.

@BoloSpeedRC 8 жыл бұрын

+Vojtěch Wolf The whole car RTR is from www.conrad.com

@vojtechwolf7667 8 жыл бұрын

+BoloSpeed RC And you do not have an exact link?

@BoloSpeedRC 8 жыл бұрын

+Vojtěch Wolf cage: www.conrad.com/ce/de/product/1301701/Reely-539084-Ersatzteil-Ueberrollkaefig?ref=list body: www.conrad.com/ce/de/product/1301681/Reely-539088-Ersatzteil-Karosserie-und-Dekor?ref=list

@sandraregina8628 7 жыл бұрын

4000kv

@MATEKYOO 4 жыл бұрын

4750kv for me

@blessedchild7206 6 жыл бұрын

126mph...that tiny thing...that toy will go missing before your eyes..hahaha...damn you boosted the wheel size like crazy hahahahahaha...that motor is definitely in trouble...