What a great video on Spur & Pinion gear replacement, and I love to hear your voice. Thanks buddy~

I really like my tt01e and it's doing well for my first ever iconic Cup series. 1 thing I did to give it better traction coming out of the corners is to pack the front diff with grease. It doesn't matter what you use as long as it is stiffer than the rear diff. It just gives you that edge pulling out of the corners. Well worth doing

cant wait to see the new top speed

Very nice, i used 61T spur and 22T pinion for my tamiya TT01

Cool

I have recently got my hands on a TT01 and started upgrading parts, starting with all ball bearings to replace the plastic bushings. I noticed there is a plastic bushing next to your spur gear, then ball bearing towards the center drive shaft. Is this supposed to be replaced when replacing all plastic bushings? I was a little confused when I saw it....I noticed Tamiya ball bearing 1280 is pretty close to the size and the circumference looks the same.

My ESC wont run with my 19t motor. Its overheating. I want speed for just cruising around my street. What gearing would help? The ESC is the stock TEU101bk. I'm wondering what gearing could help first. Thank you in advance for any advice. I'd like to keep the motor and ESC to save a few bucks but if it turns out i need a new ESC or motor to make it faster I think I'd just go brushless, but I think even on brushless I may need to change the gears anyway. It works with my old nimh batteries but as soon as I put a 2S lipo it will run for about a minute or two then stop. Put the nimh batteries back and it works again. My nimh batteries are old and lost most of their life so they need to be replaced with lipos anyway. When my nimh batteries were new i got 30+ min runtime straight with no issues.

Will these hop up parts make the car faster?

Hi, nice video. Does the motor have any movement once mounted as the motor mount isn’t secured to the chassis?

what tires are those in the front, bought a used one and has those tires, like the grip and want to buy more.

Do you use after market shaft? Or does it come with tt01?

I also have 61T/19T, if i change IT to 55T/25T does IT accelerate faster or does IT have a higher top speed?

I thought you weren’t allowed to run the speed gears. What am I missing?

Very nice..The black gears are stronger than the white ones also

Hello. Do you know if the parts for the TT01 same as TB01? 😊

I have the carbon fiber metal version and keep blowing out the spur and pinion, any advice?

What are the difference of your rear tyres and your front one?

Could you give link for pinions

Hi. Please can you help me. I have a TT01 same as yours. And I have got the stock Tamiya TT01 torque tuned motor. I tried to do the upgrade that you have done with a 55 tooth spur gear and a 25 tooth pinion gear but I can’t get the gears to mesh or even touch. Please can you tell me what i am doing wrong. Thanks very much for your help.

Do you grease the gears?

Do they sell a metal spur gear my brushless is eating the plastic one up