when i was studying motorcycle repair service and mot me another student and our tutor built a complete working wiring loom with headlight, dip beam, main beam, pass light, front and rear indicators, horn, fuel injection system, ecu, all the sensors, battery, ignition, all the dash lights, and all auxiliaries, with all the switches and buttons, live battery 12v system, mounted it onto an mdf board and labelled everything like a schematic wiring diagram that you would find in the back of a workshop manual. we where graded A+ towards our diploma for all the work and it only took us 4 days to do. Just an Idea for your next electronic project then you can fix the problems before you put them in the next vehicle you choose

I take my hat off to you Gavin. The finished tractor unit looks fantastic. It is so detailed and amazingly accurate. I have driven one of these Mercedes tractor units in the past and they are great trucks. I'm not sure that I have the skill set to attempt to build one these models though. Keep up the excellent content Gavin.

Attention to detail is great.very nice build

Such a mammoth task! Amazing!

Please do more Tamiya Trucks they are brilliant. There are clubs all over the country the hobby is growing..👍

Wow that’s beautiful , Gav.

You did an excellent job. I think pointing out mistakes and warning people of time consuming parts of the build is extremely helpful to someone wanting to build one of these. It would be interesting to take you finished truck to one of the r/c meets where all the hobbyist demonstrate their trucks.

Looks fantastic! Not really my thing, but it’s great to watch such content on the channel. I may however, consider one in the future.. 👍🏼

Outstanding build I love it

That truck is neat. But for my taste i will try some old school trucks from 80' like you do ur tamiya buggys. But great built and video. Cheers

Looking very nice 👍👌

Nice to see a longer build video :-)

Fantastic, looks great but is missing something, it needs a trailer. And just for fun a speed run in each of the gears. Great work

Looks amazing, colour scheme is perfect. You do know the top cab lights come on with the ignition and are always on, sure you don't mind doing another rewire, ha ha. As others have said looks fantastic and you should be very proud of what you have done.😀👌

you could try Loctite Glue Remover on the front

That took a lot of work, and it shows. I don't know if I could put all those hours into something destined to sit on a shelf, but it sure will look pretty doing so.

Wow fantastic job well done Gavin.. lot of work but paid off :)

looks really great. Congratulations on these great Mercedes truck.

Porsche 911 GT2, my favorite one!

Sounds like a very big project! Great job👍

Love to see you build a grand hauler

Beautiful! Gauranga :-)

Those trucks are really involved. The bumper having to come off to tip the cab forward is odd. Cabover trucks in North America usually have clearence to rotate the cab forward to service the motor. Maybe it's a Tamiya thing. Great build Gavin! Actually have never seen anyone build one of Tamiya's trailers.

Wow, turned out great 👍and great color job. I couldn't get that shine on my truck 😓 To all who are new to building trucks - it take tons of time and patience, you put it well - it's first a model and then RC truck 🚚

The build looks AMAZING BTW!

Turned out nice. The semi's are very fun to build and get up and running. Can't wait to see what else you do with it.

Fantastic build! Bring on the tank! 👍

Nice work gav, I bet your so tired of seeing the truck after spending so much time with it lol, on to something more easier lol, lovley truck 👌👍😎

Tamiya should do some sort of blue tooth app to control all the lights

To be honest, that truck looks damn good, love the colours!! I would love to have a go at one of these, just no way I can afford it at the moment. Excellent stuff mate, loved it!!

NICE job Gavin!! If you haven't done it yet, the MFC vertically against the back is best for a nice Interior. A sheet of Plastic behind the Seats look even better. In the real ones, there is a divider for privacy in the Sleeper. 😉 You gave me some paint ideas! I will be building a Truck with the same Cab... my first Merc. I was trying to figure it out. I think you've sorted it for me!

Seems a lot of work in all honesty but know it'll be well worth it!

I have built 5 trucks now, but you can still make mistakes it is quite common.

Amazing, doing one of these trucks is definitely a big goal of mine in the future. When I feel like I'm up to the task to do it justice. Good video

Excellent build

Nice job great colours i do like my trucks. I find it better putting the wire tag/numbers nearer to mfu , I also find the flysky units better as you can allocate the switches for extra lights etc on one of the later trucks they put the mouse on its side on a plate worth looking into. im in middle hopping up a flat bed trailer for my days of thunder truck with extra side lights keep up the great work 👍

Looks amazing! One day hopefully I will get my own.

Would be good to see you do a trailer to go with it ,great job ,it’s looks Awesome, I’ve bought a grand hauler and flat bed trailer , but reluctant to start it as I know it will take a lot of time

Amazing job Gavin. A lot of hard work and it looks fantastic 😎

Nice job 👏 looks good with your mfu I put speaker and mfu all in roof on all my trucks gives you lots of room in the cab but now I use beier units lot smaller

Only superman driving a real truck, would tip that cab with those handles. Others do it with hydraulic pump 😁

Number 1like... I'd say that truck looks 1/8 scale was that a lancia Delta wasn't that one of the first cars that you made I like how you did all those electronics and then you wrapped it with that wire insulator it looks really detailed even if you didn't put that much detail into it some of the parts are looking really good my favorite part about it is the cab well I wonder if you're going to put a driver I would say the Mercedes is class my does time fly fast that's what I like about the show you never know where it's going to go let's just go with the flow wiring all that up oh my goodness you must have a lot of patience that's what I like about Gavin and no matter what he does he always feels happy about what he's doing and keeping it going to the next show that's what keeps your fan base really big amazing oh yeah and Petey said hi mini t commercial on the end cuz she's a keeper

Great work not my cuppa tea personally as can’t see what you can really do with these once built but looks epic :)

Will you get a trailer for it? They can be as much fun with working legs.

Those trucks are supposed to be a1/14 scale but they look bigger than a1/10

Hi u did a good job the big question would u do anothere 1 m8 the biggest mistake u made was u put mfu in u should gon for better system there few out servanort is the best it dose more now u need a good trailer u should try grandhauler next m8

It looks great. So when are you getting the trailer for the back... lol

Ha... as by the power of thought this video pops up.🤣

Is there a way to set the indicators to a switch on the controller? I’ve never been a fan of indicators going off when you turn the wheel. I think for realism’s sake a separate control on a three position switch would be better.

hello, it's very nice. Could you please tell me the paint codes?

That rig is big, looks great. Why are you using superglue when Tamiya makes specific glues for doing this stuff Gavin?

Nice job and off topic here, if you had a new avante would you build it or keep it in the box since it’s so pretty. Second if you could be either the egress or bruiser which would you get and can only get one? I ask because this is my current situation. (Any idea where to find the avante racing steering kit)?

Great truck, but why is your studio light so blue?

excellent truck dude, I just got a second hand one of these to restore, can you tell me what colours you used, make and type. please and thank you

Did you finish the two F1 cars (carbon chassis)? couldn't find the video.

That's really looking brilliant! I know it's a somewhat dangerous question but anyway, do you have an idea of how much £ you have invested in this one? Just to get an idea because getting the truck is one thing but electronics, bearings, paint, pollish, glue etc all add up to quite a large amount of money I guess...

I missed what color of red you used on the rig. Could someone comment plz? Thanks

Does the MFC function as an esc aswell Gav

Superlike👀! Increase your stats = Promo`SM !