In this video I convert my 1/10 Traxxas Summit to Brushless. #Traxxas #TraxxasSummit
Пікірлер: 94
@RCRoads6 ай бұрын
This was very helpful. Actually it's the only one I found that actually helped. Thanks for the great job. 👍
@RCKnockout6 ай бұрын
Glad you found it helpful!
@aac99310 ай бұрын
I like the way the motor wires went instantly from straight down to straight up.
@fabulousbrad11 ай бұрын
Yes i have done this too. Castle motor mamba 2 esc. I toned it down with the software because you will eat diffs if you go full speed. The input gear is the weak spot. Wish there was belt drive diffs.
@RCKnockout11 ай бұрын
Yeah the diffs are very weak on the summit unfortunately
@christiansrcs77893 жыл бұрын
I like how you are fixing it out side
@RCKnockout3 жыл бұрын
Glad you enjoyed it!
@StopFaffin3 жыл бұрын
Great work mate I really look forward to seeing that truck running 😊👍
@RCKnockout3 жыл бұрын
Thanks! It’s definitely gonna have more power now lol 😂
@josephplato84043 жыл бұрын
Love your videos brotha keep up the good work!
@RCKnockout3 жыл бұрын
Thanks man!
@christopherrice13753 жыл бұрын
Nice job. Can't wait to see how it runs.
@RCKnockout3 жыл бұрын
Thanks!
@goldriderlc3 жыл бұрын
Nice clean install
@RCKnockout3 жыл бұрын
Thanks I appreciate it!
@moereefer3 жыл бұрын
Sweet been waiting for someone to do this it’s same chassis and setup as a revo besides diffs
@RCKnockout3 жыл бұрын
Yeah that and the two speed transmission
@jhicks17742 жыл бұрын
Great job!
@RCKnockout2 жыл бұрын
Thanks!
@drog3433 жыл бұрын
Warren is a great beach, some things to watch for, if you go more power than 4s, with those composite diffs and carriers, the material can warp and you'll have more bearing maintenance (and unfortunately they use pretty small bearings and they can come apart pretty easy). Also, on the esc settings, you'd probably want to keep the startup on the softer settings (especially if you have a particularly torque-y motor), I've twisted the shaft that holds the spur gear on mine a couple of times (once even with the stock 775, lol). Otherwise, just have fun.
@RCKnockout3 жыл бұрын
Yeah I was kinda worried about the 6s power. Thanks for the tips! I probably should turn the punch done some too
@keithmcsorley52713 жыл бұрын
awesome video
@RCKnockout3 жыл бұрын
Thanks!
@MrK67017 Жыл бұрын
Goog job. My Summit will be 10 years old this year, and I'm considering a brushless upgrade. You make the process seem much less complicated than I thought it may be. Thank you.
@RCKnockout Жыл бұрын
Glad you found the video helpful! 👍😉
@petekobraoutdoors73243 жыл бұрын
That was a pretty easy swap of motors and ESC . Hopefully it runs without a hitch? KEEP ON BASHING, OR SPEEDING! FROM BARRIE ONTARIO CANADA
@RCKnockout3 жыл бұрын
I hope so. Yeah it was basically plug and play
@shadow77963 жыл бұрын
I'd be interested to see how a good sensored setup performs in one. Maybe a Monster X and a Puller Pro race motor.
@RCKnockout3 жыл бұрын
That would be cool to see. I think this will work well for me though
@adytzuto862 жыл бұрын
Quick and maybe silly question. Doesnt the esc that comes on summit support brushless? Or only brushed? Thanks
@RCKnockout2 жыл бұрын
Just brushed
@timetokillslapp2 жыл бұрын
I have a the vxl 6s in mine I run 4s wheelies for days. Haven't broken anything yet. Hoping it stays that way.
@RCKnockout2 жыл бұрын
Nice! All stock drivetrain?
@oreosstikiland97043 жыл бұрын
Have you tryed to put rustler 4x4 drive shafts on the cheapest slash?
@RCKnockout3 жыл бұрын
No. I’ve actually got the integy metal ones on it right now
@ErrorAcquired3 жыл бұрын
Im curious if the summit can handle brushless when not bashed hard. Part of me wonders if the whole "if you upgrade to brushless shit will break" is due to people bashing hard with brushless
@RCKnockout3 жыл бұрын
Not sure? There is definitely gonna be testing on 4s and 6s so we will see how it holds up to that kind of power
@Chris-uv8hq2 жыл бұрын
6s is a no-go diffs will explode 4S is doable but Slipper needs to be adjusted correctly or the diffs will explode been there done that. It's such a great platform just a shame that the differentials are trash. Way undersized for the weight of the vehicle. lol
@s1lentcalib3r3 ай бұрын
I'm not really wanting more speed but with this brushless setup does it still crawl good with the 2 speed trans and have the torque the 775 had.
@RCKnockout3 ай бұрын
It crawls alright….it is Sensorless Brushless so it’s not as smooth as the stock setup is
@s1lentcalib3r3 ай бұрын
@RCKnockout another question I have is how do you do a cooling setup on the stock setup? I'm guessing you have to rig up a fan to run to the ESC and put a heatsink and fan on the motor. And how would you keep the lights work8ng with all that there are only 2 channels open and neither powered a fan I plugged one in and nothing.
@RCKnockout3 ай бұрын
@@s1lentcalib3r no I don’t run any added fans on mine….seems to run fine without them…it’s the stock system out of the E Revo 2.0 btw
@s1lentcalib3r3 ай бұрын
@RCKnockout sorry I ment the stock setup the titan 775 and evx 2 ESC. I herd they burn up because it gets hot fast
@RCKnockout3 ай бұрын
@@s1lentcalib3r I haven’t had any issues with the stock setup….I never found a need for more fans
@christopherlastname76384 ай бұрын
I put a max 6 in i have two motors i can ues 1400kv and a 2200kv and can run 8s but it Brakes on 4s im dun running it it's fragile im putting it back to stock and selling it !
@RCKnockout4 ай бұрын
Yeah it’s definitely not built to be a basher or built to hold up to a lot of power
@gonzodetroitify3 жыл бұрын
Nolan 😱😩 I can not wait for the run show but for now how do you like what you’ve created was it worth it😬😎
@RCKnockout3 жыл бұрын
Not sure yet. We will see how it holds up
@bertrandheyn98468 ай бұрын
Hi, With which motor did you upgrade the Titan775 I've got a Summit as well and I'm interest to know about the new motor, and also is it possible to run with 2 s battery glad to your feedback
@RCKnockout8 ай бұрын
It has the Velineon 2200kv motor out of the Erevo 2.0 but you have to upgrade the esc to run this motor though
@bertrandheyn98468 ай бұрын
You mean upgrade to 3s or more.Thank you for your quick answer; have a nice day@@RCKnockout
@RCKnockout8 ай бұрын
@@bertrandheyn9846 it’ll have to be a brushless capable esc…the stock esc can’t be wired to this motor at all…you’re welcome! 😉👍
@bertrandheyn98468 ай бұрын
thanks @@RCKnockout
@RCKnockout8 ай бұрын
@@bertrandheyn9846 no problem 😉
@meirdeaph2 жыл бұрын
Awesome is that how u ran it in your new video?
@RCKnockout2 жыл бұрын
Yeah
@NorgeSquad7 ай бұрын
How many channels does the reciever have? Imma upgrade to MT12 Radio
@RCKnockout7 ай бұрын
I think it’s a 5 channel but it could be 6 channels
@NorgeSquad7 ай бұрын
@@RCKnockout Thanks for the heads up!
@RCKnockout7 ай бұрын
@@NorgeSquad you’re welcome!
@Area-wl4np3 жыл бұрын
I converted my Summit last year the same way with no issues. 6s battery 17t pinion 65t spur losi lmt tires. it runs 44 mph.
@RCKnockout3 жыл бұрын
Nice! Do you bash yours much? How have the diffs held up to 6s?
@Area-wl4np3 жыл бұрын
@@RCKnockout it's ran flawless no issues
@RCKnockout3 жыл бұрын
@@Area-wl4np do you do a lot of wheelies and stuff? Also do you bash it very hard?
@Area-wl4np3 жыл бұрын
@@RCKnockout It does wheelie...I don't bash it real hard but I do bash it
@RCKnockout3 жыл бұрын
@@Area-wl4np are you running your slipper clutch pretty loose?
@ryanbautista885 Жыл бұрын
my summit stock motor overheats when doing high speeds and jumps on tracks even just doing 2 laps, will brushless motor fix this?
@RCKnockout Жыл бұрын
It’ll come down to the gearing you have but I haven’t had any heat issues with mine since converting it to brushless
@ryanbautista885 Жыл бұрын
@@RCKnockout even on high speeds?
@RCKnockout Жыл бұрын
@@ryanbautista885 yeah I haven’t had any issues
@ryanbautista885 Жыл бұрын
@@RCKnockout what gear set are you suggesting for high speeds?
@RCKnockout Жыл бұрын
@@ryanbautista885 I run 17/62….I don’t know what the best for high speeds would be…mine is setup more for bashing
@tomlucasrccrawlers91082 жыл бұрын
Not looking for more speed....its not a Emaxx or Xmaxx. I'm looking for more run-time while retaining the low-speed control. I'm going to go with a Mamba Monster X and a Holmes-Hobbies sensored 1/8th Puller Pro 4274S. It has incredible low-speed control and(I don't know how John designed it to fit in a smaller can)a 1/6th size rotor. It has a calculated 3hp on 6s. I'd never run it on that tho. Even unplugging the sensor wire it's really smooth.
@RCKnockout2 жыл бұрын
I gotcha….whatever works best for you man……I thought about a sensored brushless setup but I I decided to buy another Summit for crawling that still retains the stock system….I’m trying to build this one to be more of a high speed machine…..I’m trying to make it capable of standing up to 4s power…the weak diffs are the issue though
@tomlucasrccrawlers91082 жыл бұрын
@@RCKnockout you'd probably have to take off all the fun stuff like selectable lockers and spool both ends to get it to hold up better to power....unfortunately. Keep us updated on what you doing.
@RCKnockout2 жыл бұрын
@@tomlucasrccrawlers9108 well I exploded the spider gears in the diff…I’ve already got hot racing spiral cut diffs in it…and I just put some gpm steel spider gears in that rear diff so we will have to see if they can hold up
@aac99310 ай бұрын
He's gona go ahead.
@NevskiyVladislav Жыл бұрын
На какой секунде умерли сателлиты в заднем дифференциале?😂😂😂
@kitchenbriks36853 жыл бұрын
Got too much padding underneath that's why it was messing up your chassis
@RCKnockout3 жыл бұрын
Yeah you’re right about that. It’s not gonna damage anything though…so it’ll all be good
@SHOKona-wp4vr3 жыл бұрын
I'm going to say that spur gear is going to be in trouble after 2 or 3 runs.
@RCKnockout3 жыл бұрын
Maybe…..it’s steel though
@SHOKona-wp4vr3 жыл бұрын
@@RCKnockout Ok, looked plastic. It'll hold up.
@RCKnockout3 жыл бұрын
@@SHOKona-wp4vr diffs and driveshafts is what I’m worried about
@SHOKona-wp4vr3 жыл бұрын
@@RCKnockout Yeah, I run MIP axle kits in all my vehicles except Infraction V2 and XMAXX since they dont make them. I hate the Traxxas axles.
@RCKnockout3 жыл бұрын
@@SHOKona-wp4vr the Xmaxx ones hold up pretty good but the Slash ones don’t hold up very well or on the 1/16 revo