No video
Rear Brake Clean and Pad Change KTM Duke 390 125 200 250
Рет қаралды 33,368
Күн бұрынRegular maintenance of the rear brake unit on the KTM Duke 390 125 200 250 will ensure good performance and will also allow you to change the rear brake pads.
Instagram: / moto_mirius
Subscribe to keep up to date with the regular content: bit.ly/2UWwY90
___
Upgrade Links - Moto Mirius
www.motomirius...
KTM Duke 390 Servicing - Moto Mirius
www.motomirius...
Watch KTM Duke 390 Servicing Videos on KZfaq
• KTM Duke 390 Service a...
KTM Duke 390 Upgrades - Moto Mirius
www.motomirius...
____
Follow me here:
Instagram: / moto_mirius
Facebook: / motomirius
Website: www.moto.mirius...
___
Music provided by Epidemic Sound: www.epidemicso...
___
Logo: bit.ly/2Zau67P
#RokONSquad #MotoMirius #KTM390
moto mirius,ktm 390,ktm motorcycle,ktm,
ktm duke 390,390 KTM Duke,ktm duke,duke 390,390 duke,duke 390 mods, 390 duke mods, duke 390 modified
2017 ktm duke 390,ktm duke 390 2017,2017 duke 390,390 duke 2017,duke 390 2017,2017 ktm duke,2017 duke 390 modified,2017 duke 390 mods,
2018 ktm duke 390,ktm duke 390 2018,2018 duke 390,390 duke 2018,duke 390 2018,2018 ktm duke,2018 duke 390 modified,2018 duke 390 mods,
2019 ktm duke 390,ktm duke 390 2019,2019 duke 390,390 duke 2019,duke 390 2019,2019 ktm duke,2019 duke 390 modified,2019 duke 390 mods,
2020 ktm duke 390,ktm duke 390 2020,2020 duke 390,390 duke 2020,duke 390 2020,2020 ktm duke,2020 duke 390 modified,2020 duke 390 mods,
ktm rc 390,ktm rc,ktm,rc 390,390 rc,rc 390 mods, 390 KTM rc
2017 ktm rc 390,2017 ktm rc,2017 ktm,2017 rc 390,2017 390 rc,2017 rc 390 mods,2017 390 KTM rc,ktm rc 390 2017,ktm rc 2017,rc 390 2017,390 rc 2017,rc 390 mods 2017, 390 KTM rc 2017
ktm duke 125,125 KTM Duke,duke 125,125 duke,duke 125 mods, 125 duke mods, duke 125 modified
ktm duke 250,250 KTM Duke,duke 250,250 duke,duke 250 mods, 250 duke mods, duke 250 modified
ktm duke 200,200 KTM Duke,duke 200,200 duke,duke 200 mods, 200 duke mods, duke 200 modified
@callumboothroyd3766 3 жыл бұрын
Great explanation of the rear brake unit, can't wait to see a full maintenance of the rear brake, the glide pins and stuff. Thanks as always my knowledge grows with your videos!
@MotoMirius 3 жыл бұрын
Thanks, always appreciated. Hopefully it will come along soon, but one of many videos still to do!
@ariyako 4 ай бұрын
still waiting
@LCNismo 3 жыл бұрын
I've been watching all our ktm 390 videos and I don't even have one yet. I do plan on getting one soon. I will be able to work on the bike once I get it. Thanks for the videos
@MotoMirius 3 жыл бұрын
Thanks, you will be an expert! This is one of my all time favourite bikes.
@rolan2dr 2 жыл бұрын
I’m in love with this bike. Best purchase I’ve ever made.
@andrewwiltse8882 3 жыл бұрын
Thanks David always a pleasure!🏍
@MotoMirius 3 жыл бұрын
Thanks, much appreciated
@AMARarifin 2 жыл бұрын
I LOVE your passion sharing this model technical knowledge / guideline.. thanks from Malaysia KTM rider.
@MotoMirius 2 жыл бұрын
My pleasure! Thanks
@royneraguero2523 11 ай бұрын
Thanks!! Bro!! You save my life!! 😂😭
@TheJWC56RSA 3 жыл бұрын
As always, clear as daylight! Thanks & Regards!
@MotoMirius 3 жыл бұрын
Still working towards it - waiting to get the 650 Bandit fuel issues sorted, can't have too many bikes in pieces at the same time - no more than three is my rule!
@yash9410503314 2 жыл бұрын
Hi David, thanks for the easy explanation. I was following you step by step but mistakenly I pressed the rear brake lever and now the piston moved to the farthest outermost position (almost no gap between the disc rotor and the piston), hence making it impossible to slide the new brake pads into their position. Could you please tell me how to move the piston back to its innermost original position so that I could install the pads. Thanks
@qusai2056 2 жыл бұрын
Hi! I did the same mistake, did you get help?
@robboone3551 Жыл бұрын
How did you get it fixed? I have the same problem
@Kuper133 3 ай бұрын
Очень полезное видео. Спасибо!
@MotoMirius 3 ай бұрын
You are very welcome! Thanks
@brigidotangcangco5001 Жыл бұрын
It is a big help right I encounter problem with my rear brake
@MotoMirius Жыл бұрын
Good work with that!
@joseamoares 4 ай бұрын
Buen trabajo. Muchas gracias por tu info.
@springy-2112 3 жыл бұрын
Good advice David , really well produced video . Peace and love brother 👍🏻☮❤
@MotoMirius 3 жыл бұрын
Thanks Springy. I don't know how you manage to do it on a phone!
@springy-2112 3 жыл бұрын
@@MotoMirius Ah ..simplicity ..and remember my vids are all wobbly and badly edited! 👍🏻☮❤
@romanreignsfansindia3997 Жыл бұрын
Thanks sir
@MotoMirius Жыл бұрын
Welcome
@ezekielgskeen8607 3 жыл бұрын
Thanks again! for for great bike tutorial
@MotoMirius 3 жыл бұрын
Thank you, much appreciated!
@itzlizardking8704 3 ай бұрын
Hola david! Quisiera saber si las tapas de metal que traen las balatas nuevas debe retirarse de las mismas? O se pueden instalar así? Las refacciones de BAJAJ, son compatibles con ktm y estas refacciones, las balatas traen una tapa metálica en la parte trasera
@MotoMirius 3 ай бұрын
Hola, no hay razón para quitar las cuñas metálicas de la parte trasera; están ahí para ayudar a eliminar el chirrido de los frenos.
@theyellowjello5883 Жыл бұрын
I don’t have enough room to put the pads back in
@andreparcon2079 7 ай бұрын
You might've squeezed the brake lever. You'll need to push the piston back in by moving the caliper.
@niroshthirojan886 3 жыл бұрын
Hello sir .Thank you 😊
@MotoMirius 3 жыл бұрын
Thank you, much appreciated.
@tusharkantihansdah 3 жыл бұрын
Why u didn't turn the reservoir rubber cap upside down..
@MotoMirius 3 жыл бұрын
Because it has fluid on it, and if you turn it upside down it will run down onto the top part where it shouldn't be.
@fogyreviews6329 3 ай бұрын
How do you push the piston in please
@MotoMirius 3 ай бұрын
Unbolt the caliper and rock it backwards and forwards so that the pads are pushed back by the disk. If you've already removed the caliper, with the old pads in place, lever them apart with a pry bar of some sort - a large screwdriver can work.
@prashanthpentyala3556 Жыл бұрын
My breaks are not working after cleaning and replacing back them any suggestions
@MotoMirius Жыл бұрын
If you have pumped them back up with the lever so they move forward against the disk then they will work - you must remember this step, but it only takes a few pumps. If this is not happening then you need to check and see what is wrong.
@josevargas2317 Жыл бұрын
Alguien sabe porque el mío no regresa y queda como duro el freno trasero 😣😞
@MotoMirius Жыл бұрын
Si las almohadillas se pegan, es casi seguro que ellas o los pasadores estén sucios y necesiten limpieza. Las piezas limpias se moverán libremente.
@saipratheek5499 3 жыл бұрын
Helpful
@MotoMirius 3 жыл бұрын
Glad you think so!
@cavitecheckpoint 3 жыл бұрын
Do you still have the duke 390's stock side mirrors, can you shorten it for ease in lane filtering, cause the stock height gets easily caught on trucks and vans side mirror. Can you make a tutorial on how to best do it. Informative vids by the way😁
@MotoMirius 3 жыл бұрын
Thanks, much appreciated. There is never a single perfect placement for mirrors - too high and they catch van mirrors, below the handlebars and they catch car mirrors, depending on your body shape they may just show your elbows etc and on the Duke, they hit the tank and fairings. I have a set of mirrors I bought for just this purpose - but it will require welding so I'm still figuring out the design - there are some mirrors which would do the job perfectly but they are very expensive.
@cesarfabello4769 Жыл бұрын
i cant get my caliper to move back n forth like that. I don't know if my spring is too strong or what the deal is. Id rather not have to remove the whole caliper just to fit in the inside pad. Anyone have any ideas on why my rear caliper doesn't easily move like in the video?
@MotoMirius Жыл бұрын
Normally because it needs cleaning.
@TheJWC56RSA 3 жыл бұрын
You must still do the valve clearance (shim) video.... Regards!
@MotoMirius 3 жыл бұрын
Coming soon! Well soon ish - needs doing but as I say depends how quickly I find the issue with the Bandit
@pradeepkummu1917 11 ай бұрын
👌👌👌👌👌👌👌👍
@rustytanks 8 ай бұрын
Hi David, thanks for the explanation, is the 125 and 390 gen 1, the same calipar, thanks in advance
@MotoMirius 8 ай бұрын
The same rear caliper has been fitted to the 125 to 390 Dukes from 2011 to 2021
@rustytanks 8 ай бұрын
@@MotoMirius wow thats good to know, thanks for sharing your knowledge
@theyellowjello5883 Жыл бұрын
Hey David I really need your help how can I reset the piston if it’s really pushed out
@MotoMirius Жыл бұрын
This is why you rock the caliper before removing, but even so sometimes you need more. If your piston is pushed out it sounds like the lever was moved with the caliper removed. You can get special pliers and tools to push the piston back. In an emergency get one or more pads back in and lever against the pad (pad against piston) to push the piston back in. If it needs cleaning it can be stiff to push back in.
@user-jg8oj3ph5h 7 ай бұрын
Tell me, is the tire tubeless or with a tube? Is the MICHELIN STREET RADIAL 150/60R17 tire suitable?
@MotoMirius 7 ай бұрын
Cast wheels are tubeless. If you are unsure about a tyre, go to the manufacturer website and they will have a tyre guide which lists the tyres that fit your bike. So Michelin for example recommend the PILOT POWER 2CT. The Street will fit the rim so you can use it, but it's not what Michelin recommend for the bike as it is a more general purpose tyre and Michelin (and most other manufacturers) recommend a sports tyre for this bike.
@user-jg8oj3ph5h 7 ай бұрын
@@MotoMirius Thanks for the detailed answer
@lewisglennie 2 жыл бұрын
Any tips on stopping the brake from binding ?
@MotoMirius 2 жыл бұрын
Keep it clean. It will only bind if you've failed to keep on top of it.
@willyangabrigo1174 2 жыл бұрын
Hi, how do i remove the front brake pad,
@MotoMirius 2 жыл бұрын
It's covered in this video - kzfaq.info/get/bejne/bs9xarGkyZabfKM.html
@xAGTHD Жыл бұрын
Hi mate :) is it normal for the calliper to heat up a lot after replacing the pads? Thanks
@MotoMirius Жыл бұрын
Yes - caliper and disc should burn your fingers after heavy or repeated braking - a lot of friction is involved. If you watch videos of racing vehicles in the dark the disc will glow red hot.
@MrDingle1987 2 жыл бұрын
Don't suppose you know if the standard stock pads are sintered pads?
@MotoMirius 2 жыл бұрын
They were on mine and others have said the same. It may depend where you live. Easy to check - just pull a pad and see if there are flecks of a brassy metal in the pad.
@tridiveshnaidu5603 Жыл бұрын
bro how much do they charge to replace front and rear brake pads ?? in showroom ?
@MotoMirius Жыл бұрын
I wouldn't know - depends how much they charge per hour. But this is so simple to do that I don't recall paying anyone to do it.
@emilesteyn7648 2 жыл бұрын
Hey david! I recently removed the cap on my rear brake reservoir and there was quite a bit of crystalization in the resevour and on the rubber cap. Is this a problem?
@MotoMirius 2 жыл бұрын
Sounds like a change of fluid is overdue. You shouldn't be getting any noticeable crystallisation
@emilesteyn7648 2 жыл бұрын
@@MotoMirius ill get on that as soon as possible! Thanks for the reply
@jevsplay5116 2 жыл бұрын
hello.. what brake fluid use for ktm duke 125 2021 ? thanks
@MotoMirius 2 жыл бұрын
I don't think brand is important for brake fluid - just use a mainstream brand and change it regularly
@jevsplay5116 2 жыл бұрын
dot4 or dot5.1 ?
@MotoMirius 2 жыл бұрын
@@jevsplay5116 Doesn't really matter unless you are racing. It's more important to change the fluid than how much you spend on it - I would bet 90% of bikes are overdue for a change in brake fluid
@rolan2dr 2 жыл бұрын
My foot brake came loose. Help!
@MotoMirius 2 жыл бұрын
Which part?
@rolan2dr 2 жыл бұрын
The banjo bolt, right behind the foot peg in your video.
@rolan2dr 2 жыл бұрын
BTW I brought my bike to the US from the UK.
@MotoMirius 2 жыл бұрын
@@rolan2dr As I commented on your forum post - I don't see how that bolt came out without human intervention- most likely someone really badly adjusted the rear brake lever position. It isn't a banjo bolt. I suggest you buy a second hand master cylinder and use the parts you need from it.
@rolan2dr 2 жыл бұрын
@@MotoMirius I bought a second hand master cylinder but I can’t get the foot brake to stay in place to keep the push rod in place. I guess I’m going to have to take it to a dealer.
@jevsplay5116 2 жыл бұрын
how to take this stupid service light off .. ? i dont want pay 160 pound every 4.000 miles just for change me oil :)) ktm duke 125 2021
@MotoMirius 2 жыл бұрын
There are links to the other videos on card in this video and in the description, but to save you clicking the video you want is here kzfaq.info/get/bejne/a8CgrZR6ptmnkas.html
@jevsplay5116 2 жыл бұрын
there is no these option preference .. only settings ...
@MotoMirius 2 жыл бұрын
@@jevsplay5116 You just set it far into the future in mileage and date and it never comes on again
@user-ii8li2bp8i 3 жыл бұрын
any indian viewers 😍
Дима Масленников
Рет қаралды 8 МЛН
The Wanderlust Ride
Рет қаралды 9 М.
KTM DUKE 200 Full restoration | Restored DUKE 200 Sport Motorcycle | Old Bike Restoration And Repair
Michael Restoration
Рет қаралды 313 М.
Technology Trends
Рет қаралды 645 М.