REAR OUTER AXLE BEARING AND SEAL REPLACEMENT YANMAR 1500D

Рет қаралды 9,839

Жыл бұрын

MY BEST TRACTOR VIDEOS: / @yanmarcentral
seal kit includes:
SFRAHG-3434.. REAR AXLE HOUSING GASKET
SFAC-4150...AXLE COLLAR
SF-55X75X9TC... REAR AXLE SEAL
- cost: $30
- Source: eBay (or southernfarmequipmentimports.com)
- Part numbers:
* collar: SFAC-4150
* Collar original part number: YA5350 Rear Axle Collar---Replaces 194150-34360
* Seal: SF-55x75x9TC
* Seal original part numbers: 24421-557509 Yanmar rear axle Oil seal YA5311 or AE3045E0
* Gasket: SFRAHG-3434
* Gasket original part number: 194150-34340
Links to axle seal kit:
- southern farm equipment we site: www.southernfarmequipmentimpo...
- eBay: www.ebay.com/itm/134330545444
- Other places to buy parts: HOYTE tractor, Walt’s tractors.com, best farm parts.com, Fredrick’s equipment, many other places on line.
Rear axle bearing:
Cost: $20
Source: eBay
Part numbers: 6209.2RSR OR 6209LB
Link: type in “6209 sealed bearing” look for brands like FAG, TIMKIN, SKF, NSK
Rear lug bolts and hub thread size and pitch:
M16x2.0 (torque I set my bolts to: 100FTLBS)
Center hub bolt thread size and pitch:
M16x1.5 (torque I set my center hub bolt to: 180FTLBS)
Other products used in this video:
- rust converter: www.amazon.com/Rust-Oleum-Aut...
- Corrosion-X: www.amazon.com/Corrosion-X-90...

Пікірлер: 19

@sandman2345 2 ай бұрын

Keep these videos coming !!

@Iceeeen 3 күн бұрын

Thanks for the bearing specs. Just did them. Lots of heat, broken puller but they came out.

@GaryBennett-iw6gy 2 ай бұрын

Nice video, very informative. Thank you for posting!!

@leonardfay7073 2 ай бұрын

Thanks!

@mario5513 Жыл бұрын

Really helpful video, well done.

@YANMARCENTRAL Жыл бұрын

Thanks I really appreciate it! These videos are fun to make, but tedious. But if they help one person it’s all been worth it! Thanks for watching!

@coryboyd7958 10 ай бұрын

Thats why God made impact hammers

@RichaRat Жыл бұрын

I have a 3110D that I am going to have to change those front bearings, plus the throw out bearing, and brakes. Obviously it won't be exact, but is very helpful seeing what will be involved. Thanks for the information on metric bolt identification.

@YANMARCENTRAL Жыл бұрын

No problem at all, glad I could help! Thanks for watching!

@amend5269 8 ай бұрын

Somebody needs a slide hammer and electric impact for Christmas

@coryboyd7958 10 ай бұрын

Nice job

@YANMARCENTRAL 10 ай бұрын

Thanks!

@Punk-Jw 2 ай бұрын

Well I'm glad I investigated it some before I started to tear mine apart... I was also worried about not being able to pull the axle without getting into the rear end. My tractor is red but it WAS originally that puke green color. It's a 78 ym195D. So should I be able to pull the axle on mine right from the hub? I've done a lot of axle seals in semi trucks and like ford 9 inch and gm rear ends but I've never dug very deep into a tractor. I'm doing it outside also so, I want to know what I'm up against before I get started... I'm going to do the seal, the sleeve and possibly bearings and race while I'm right there depending on how they look. I have very little knowledge on its history unfortunately. Thanks

@owen368 10 ай бұрын

Might be worth checking bearing part number as some Japanese makers simply use the bearing spec in/out size ect as a part number kawasaki does and I think Suzuki do as they all use standard of the shelf bearings where possible.