Rear Tire How To | Yamaha XSR900 Fz09 MT09 FJ09

Рет қаралды 17,147

3 жыл бұрын

Eh Guys! wuzzz up! play on HD! So here's another DIY on Rear Tire how to remove and reinstall a new tire replacement on my Yamaha XSR900 almost the same as FZ09, MT09, FJ09 I hope this DIY video may help you guys. So feel free to leave a COMMENT down below hit the LIKE and don't forget to SUBSCRIBE! and I'll BeRideBack! Slam that Bell yah!!! THANK YOU!!!
And also
Please VISIT and LIKE my Facebook Page - BerideBack BRB
Reach me out at bonbuenavista04@gmail.com
Again Thank you for your time watching this video Folks!

Пікірлер: 57

@sawyer4981 Жыл бұрын

Just one piece of advice, I'd suggest breaking the axle nut with the rear tire still on the ground. I know more than one person who's had their bike fall off the stand when breaking the bolt loose on the stand.

@jazzcam2799 2 жыл бұрын

Excellent video mate , that’s the easiest I’ve seen so far , thanks

@BeRideBack 2 жыл бұрын

Thank you mate, hope this video helps our xrs and fzs riders out there, be safe and have a great one👍

@ScoobyRolla 3 жыл бұрын

Enjoy watching keep up the good work 👍🏼

@BeRideBack 3 жыл бұрын

Thank you very much my friend, have a happy holiday! and be safe always.

@MARKRIDERph 3 жыл бұрын

Thank you for sharing always bro, taking care of the bike while removing and change rear tire. This is a real baby. Merry Christmas idol.

@BeRideBack 3 жыл бұрын

Thank you very much bro, yes its a bike for keeps, be safe and Merry Christmas bro.

@patricklarochelle6975 2 жыл бұрын

Very usefull and well done.

@dirtbikeenthusiast9494 3 жыл бұрын

Ayos bro! Galing!

@IamJay 3 жыл бұрын

Very informative bro. Salamat sanidea na ito kahit wala akong motor na ganyan atleast my idea na ako paano. Ride safe always brom

@BeRideBack 3 жыл бұрын

Maraming salamat bro, stay cool and be safe always, Merry Christmas!

@policarpiosantos3489 3 жыл бұрын

Thanks again for sharing brader!😃. Stay safe!

@BeRideBack 3 жыл бұрын

Thank you very much brader! Merry Christmas and be safe always..

@brandonclayton7771 2 жыл бұрын

Great video! Thanks

@BeRideBack 2 жыл бұрын

Thank you Brandon Clayton, be safe always

@ferrisnox 8 ай бұрын

Awesome video thanks.

@BeRideBack 6 ай бұрын

You're very welcome, and thank you too, happy new year and ride safe always!

@rd5216 Жыл бұрын

Very helpfull video. Thx.

@OutCastmotovlog 3 жыл бұрын

Sarap nyan sir burning!!

@BeRideBack 3 жыл бұрын

Maraming salamat Sir! Merry Christmas and Be safe always..

@Fabianodamt 3 жыл бұрын

Mais uma excelente dica

@BeRideBack 3 жыл бұрын

Thank you amigo, Merry Christmas!

@Kraken9911 10 ай бұрын

The hardest part is lining everything up for the reinstall. Wheel spacers falling out, rear brake jumping off the rail. Trying to hold the whole thing up with your foot. It's a real pain in the ass and I dread doing it every single time.

@BeRideBack 10 ай бұрын

Indeed sir, thank you and ride safe always

@Viper6-MotoVlogger 3 жыл бұрын

I put a set of those Michelin Road 5 and they are really grippy right from the start. You’re going to love them. Be safe bro and Merry Christmas 🎄

@BeRideBack 3 жыл бұрын

Thank you very much bro, your absolutely right bro pure confidence in every corner, Merry Christmas bro.

@Viper6-MotoVlogger 3 жыл бұрын

@@BeRideBack thanks 🍻🎄

@MargieAndaya 3 жыл бұрын

Nice merry Christmas 🎄

@BeRideBack 3 жыл бұрын

Thank you very much, be safe always and Merry Christmas

@joweeboi5442 3 жыл бұрын

Astig yung intro mo bro!

@BeRideBack 3 жыл бұрын

Maraming salamat bro, be safe lagi

@MikesM10 3 жыл бұрын

nice tutorial PAPs at ang ganda ng intro, RS always

@BeRideBack 3 жыл бұрын

Maraming salamat bro, be safe lagi and Merry Christmas..

@MikesM10 3 жыл бұрын

@@BeRideBack Merry Christmas din

@Whichwaydidtheygo 5 ай бұрын

Your install is deceptively simple. Aligning everything is very hard I don’t know how you made it look so easy. This is a two man job. The disc side spacer falls out every time. There is no space between spacer and caliper bracket. This alone is a three power job if working alone

@SC8terRiderMotoVlogger 3 жыл бұрын

🤗 👍 ☝️ 😎 Nice one KaMotoFriends 🤗 Stay safe 😷 Ride safe 😉 Thanks for sharing 🤗 Linaw kitang kita yung SC8ter Rider Sticker 😍

@hkvirgzvlogs7038 3 жыл бұрын

Ganda ng motor mo adding ko.galing mo na magkalikot.

@BeRideBack 3 жыл бұрын

Maraming salamat Ate Virgs, mahal kasi paayos dito hehe be safe always ate and Merry Christmas..

@SC8terRiderMotoVlogger 3 жыл бұрын

Sana Oil 🛢️ Naka Michelin 🤩🤩🤩

@whocarescameraj1809 3 жыл бұрын

I was worried I might be dragging my rear tire too much, due to how little wear I have on the sides.. After watching these videos, and seeing EVERYONE changing flat-topped tires, I think I might just be normal.

@jackmeoff7686 3 жыл бұрын

Yes if your tyre is very flat / rounded off in the middle you should change, it gives the motorbike weird handling characteristics it wont want to turn in etc

@luismontes7459 2 жыл бұрын

@BeRideBack, when you remove the rear wheel, do you have to adjust the chain tension back to stock?

@BeRideBack 2 жыл бұрын

Thanks Luis for the comment, sorry for the super delayed reply, no need to adjust the chain tension if it's not due to it's service maintenance or the slack is under one inch, just pull the axle and make sure to push the tire towards front once you've returned back the axle before you tighten it, be safe always

@luismontes7459 2 жыл бұрын

@@BeRideBack thank you for the response bro! I appreciate the information!

@OzzyMoto27964 Жыл бұрын

When I did this I had a real hard time getting the caliper back on. Any suggestions?

@BeRideBack 11 ай бұрын

First off all thanks for tuning in, to make easy to install use a bar or wood to lift the tire and leve it, so the axle slides easily with the caliper make sure it exactly by the notch, be safe always

@stever4184 10 ай бұрын

Me too mate was a nightmare. Got it on eventually by keeping the chain off until the caliper was on but must be an easy way. It came off easy peasy!!

@Kraken9911 10 ай бұрын

@@stever4184I've had a lot of bikes. I'm going to say it right now that reinstalling the rear on the XSR 900 is the hardest one I've ever had. My other bikes the rear caliper stays in place so it's just a simple matter of sliding the wheel up in there or you can install them last after the axle is already jnstalled. The XSR it wants to popout as soon as you breath on it and the clearance between the spacer and the caliper mount is very tiny.

@stever4184 10 ай бұрын

@@Kraken9911 I now now why the shop asked ‘can you just bring the wheel in for us ?’! I’ll let you know how it goes next time after another 3K miles!

@mr.notsure9679 Жыл бұрын

From 2 years in the future, how did you like those road 5s?

@BeRideBack Жыл бұрын

Hello There, Actually it's been two years now and I put 11k on it and Still looks new, So much better than the Stock ones, I love these tires they made me no worries riding the twisties even though there's a slight gravel.

@mr.notsure9679 Жыл бұрын

@BeRideBack awesome, I am about to put a set on my bike and that is great to hear.

@secrets1475 Жыл бұрын

Question on axle positioning. At 7:17 the flat side of axle is sitting flat on the chain adjuster. I noticed mine does not sit exactly flat, slightly turned counter clockwise. Is it alright to leave it or shouod I make sure its squared off with the chain adjuster

@BeRideBack Жыл бұрын

@@secrets1475 good question, it's supposed to be squared because it has not much space top and bottom, but if it does may a millimeter that's fine as long as your chain is aligned with front and rear sprocket, that's the most important

@secrets1475 Жыл бұрын

@@BeRideBack thanks!