Rear Wheel Removal / Install on a 4 Stroke Chinese Scooter

Rear Wheel Removal / Install on a 4 Stroke Chinese Scooter - JINLUN

Рет қаралды 68,672

4 жыл бұрын

Hey guys, on todays video I am going to show you, how you can easily remove and reinstall the rear Wheel. Have fun!
Torque:
Lug Nut: 100 Nm
Exhaust Video:
• Auspuff ausbauen / wec...

Пікірлер: 39

@kalebmckinney7955 2 жыл бұрын

This video was very helpful and enlightening. I now know what I need to do. Thank you so much!

@der-andyman 2 жыл бұрын

Very glad I could help :-)

@igotem357 7 ай бұрын

This guy is great thanks happy holidays

@der-andyman 7 ай бұрын

Thanks mate, happy holidays to you too

@moonlight_ella_ 4 жыл бұрын

The Video is well explained, I hope you get much subscribers in a Short Time 🙂👍

@KevinGCoxen 2 жыл бұрын

First off, Thank You for such an informative video. I have some suggestions that i think would help. Lubricate the wheel threads. Remove the exhaust before using a wrench on the wheel. That way you dont need an extension ( loses torque and harder to use ) The last thing to put on is the exhaust, after the wheel has been secured. Kicking the wrench is a bad idea. Put a pipe snugly over the wrench handle for more leverage. ( this makes the handle longer ) With all of my suggestions, you helped and i like how you mention to recheck the wheel after 25 miles or so. Sometimes a machine will or will not require an early on adjustment and it is always wise to check any nut or bolt after a short break in period. In this case you are potentially saving lives, thanks again.

@der-andyman 2 жыл бұрын

Hi Kevin, thank you for the suggestions. I will keep them in mind :-) Would you like more of my videos to be made in English too? I am not sure if there is an audience and if the hard work, it takes me to translate the videos, is always worth it. But when I read such a brilliant comment, like yours, I automatically assume it is worth it :-D

@KevinGCoxen 2 жыл бұрын

@@der-andyman Hi Andreas. I dont own a scooter, my neighbor does. I am moving soon so i wont have the need myself. However ! your video was so well done that i am certain other scooter people would appreciate more of your videos. I have looked online a few times for my neighbor and the need for videos like yours is there. The photography was excellent. The rest was very good too. Many video tutorials are jerky and hard to follow. Again, excellent production work and your accent was legible and enjoyable for an American listener.

@der-andyman 2 жыл бұрын

@@KevinGCoxen thank you very much. As you might have guessed, I am German. And hearing that my english speech is pleasing a native speaker is soooo awesome. Thank you for that. Really.

@fozzysrchobbies1343 4 жыл бұрын

Use an impact wrench on the wheel nuts , it will make it alot easier for you and save you time

@der-andyman 4 жыл бұрын

Yes, I own 2 of them, but I am trying to show these repairs with common tools. impact wrench is more of a specialised tool :)

@althompson7314 Жыл бұрын

@@der-andyman Precisely! The point is that the average Joe with simple tools can do this job! Also, you don't want to use an impact wrench to tighten the wheel nut, as that must be done with a torque wrench to get the proper torque. Also, retightening after 10 or 12 miles to 75 ft-lbs is also a definite requirement! You do not want to be singing that song "You picked a fine time to leave me loose wheel" LOL!

@danieldelaviga5054 3 жыл бұрын

The question of the mosek with me spends a lot of gas What's the reason?

@RobertdddJones 2 жыл бұрын

I need some advice because my yy150-12 has the brake out the wheel. I’m not sure what wrong but it’s not my belt or motor. My scooter will move either direction about 3 feet then lock up. I honestly don’t know what I am doing just need advice or pointed in the right direction

@der-andyman 2 жыл бұрын

Ok.... Thats a very weird issue. Might be a transmission issue, if it locks up in both directions. I sould not be a problem with the belt or variotor, as these usually kick in at higher RPMs and not when the scooter is just being pushed. Sorry, I dont think I can help you with this, especially because I dont have the scooter here :(

@guruji243 2 жыл бұрын

Is it good to tighten nut while putting a screwdriver in clutch if one is alone.

@der-andyman 2 жыл бұрын

Not too sure. But it should be ok

@Ostatnizlol 4 жыл бұрын

Thank you for the tutorial(s) :D also just so happens i'm in germany... perhaps youtube algorithm sent me here ?

@der-andyman 4 жыл бұрын

It might be :) Thank you for the kind words. Greetings, Andres

@JonahNAloha 2 жыл бұрын

What would be the issue if my rear tire feels sloppy when making turns?

@der-andyman 2 жыл бұрын

I guess the tire pressure is too low.

@Bradleehawkinz 3 жыл бұрын

Does anybody know where I can find a replacement flanged nut for a gator moped

@der-andyman 3 жыл бұрын

I would say ebay / Craigs list or aliexpress

@kevinthorn9672 2 жыл бұрын

What size is the nut on the back tire ? I need a link for home depot on which to buy

@der-andyman 2 жыл бұрын

Hi there, my nut was an M16 with a 24mm socket to fit on top. I hope that helps. Greetings.

@kevinthorn9672 2 жыл бұрын

@@der-andyman i have a rx 50 50cc moped and i gotta get a new tire idk what size it is

@der-andyman 2 жыл бұрын

@@kevinthorn9672 I can't give you a link, I'm not familiar with home depot, I'm sorry

@RollerMobile79 4 жыл бұрын

Hey Andi cooles Video von dir :-) hab heute eher gesagt gestern auch eins Hochgeladen kannst ja mal vorbei schauen. Liebe Grüße RollerMobile

@zatkolucas7838 3 жыл бұрын

Thanks

@der-andyman 3 жыл бұрын

You are welcome :D

@pulpfiction2752 4 жыл бұрын

Jo machst krasse Videos! Würde mich über ein push freuen und andersrum auch so! 🔥👌

@ABCDEFGHIJKELA... 2 жыл бұрын

no need for second person, put a piece of wood in the wheel to stop it from moving

@der-andyman 2 жыл бұрын

Yeah, this might work too :-)

@yinace7 Жыл бұрын

I think that make thing more worst. Make spoke wheel condition become weak

@nobodyyyyy556 2 жыл бұрын

y'all laugh at the warning on this video my wheel came off because there's no lug nut when I bought it. you'll lose speed and have time to stop unless you're wide open. don't kick the wrench, slide a pipe in

@nobodyyyyy556 2 жыл бұрын

also how'd you know I was from Florida I got off, got it back on after sliding it back on and rode where I was going

@donbatten932 2 жыл бұрын

It's not proper to kick your wrench, it can break the axle, and or strip the nut. Do it right use a breaker bar. Don't need a tourqe wrench either, if you have any experience with tightening bolts use you feel and good judgement when tightening the nut on the axle. Only a newbie would stomp on a wrench to break a bolt lose. Respect your tools.

@der-andyman 2 жыл бұрын

Thank you for your comment. Although I can agree with you with the kicking thing, I strongly recommend using a torque wrench, especially because most of my viewers should be under the age of 18 and not experienced enough to have the feeling for torque you speak about. Have nice day mate

@althompson7314 Жыл бұрын

@@der-andyman Feel schmeel! Could not agree more Andreas! USE A TORQUE WRENCH! The risks involved in screwing this up are just too high! Interesting that DB criticizes you for stomping the socket handle, then turns right around and recommends abandoning the safe practice of using a proper torque wrench! Hypocrisy personified plus IMHO!