Rear Wiper Rubber Inserts and Refills - How To Replace - By Bowing It Out

  Рет қаралды 397,993

fixpro256

fixpro256

10 жыл бұрын

Updated 2022/08/11 Shows how to replace or install the rear windshield wiper refill or insert instead of replacing the entire blade. We have 3 videos showing 3 different methods to replace the wiper refill.
For method 1, just bow the wiper refill out until it clears the end claw. Watch the video for details. • Rear Wiper Rubber Inse...
For method 2, just snap the wiper blade apart. Only works for most plastic wiper blades. Watch the video for details. • How To Replace Rear Wi...
For method 3, just cut the end tab off. Then the blade is more like the front wiper blades. Watch the video for details. • How To Replace Rear Wi...
Don't throw the entire blade into the landfill. Just replace the rubber. In the uk they call a windshield a windscreen.
I like cutting off the tab the best because once you break off the tab, it's easier to replace the rubber each year with very little effort.
On most cars/trucks with a covered wiper arm, just turn the key off when the wiper is in the middle of the window to make it easy to work on the blade. There are at least 3 different wiper claw profiles. (6mm square, 7mm trapezoidal, 8mm square). There may be more. Buying just the insert or refill is the cheapest way to go. If you can't find a refill, you can buy a cheap front wiper and swap the rubber, as long as the profiles are the same.
Tricoproducts.com makes the break-to-fit wiper refills that are/were in some auto parts stores. You may have to ask for them at the counter.
Some refills do have retaining ends. Usually only at one end. Sometimes in the metal ribs/slats, sometimes built into the rubber. Put the retaining end closest to the pivot point of the arm (the motor end). Cut the opposite end off.
Some rear wiper blades (not inserts) have a tab built into each end that keeps the insert from slipping out. If you have to break one of them to replace the insert, break the one closest to the pivot point (the motor end). The tab on the far end will keep the insert from slipping out.
Update 2015/03/25: I went to Advance Auto Parts today and they told me they don't carry the break to fit wipers anymore. But, I did a search on ebay and found just the rubber, You can get 2 of them 24 inches long for about $2. They only come in the 6mm width for now but maybe we'll see the 8mm one day.
=========================
Just tags below this point to help people find the video:
how to change rear wiper blades
how to change a rear windshield wiper insert refill
changing the rear wiper blade
Jeep Cherokee Toyota Rav4 Ford Escape Honda Odyssey Toyota Sienna Jeep Wrangler Nissan Rogue
repair, change, installation
cars, trucks, suvs, vans
new used
Chevrolet Chevy equinox traverse hhr tahoe
Ford edge expedition escape explorer
Suzuki PSA Peugeot
Honda Accord Civic
Fiat Chrysler Hyundai Renault GM General Motors Volkswagen Acura Audi BMW Buick Cadillac
Dodge Ferrari GMC Infinity Jaguar Jeep Kia Land Rover Lexus Lincoln Mack Mazda
Mitsubishi Endeavor
Nissan 370Z Altima Frontier GT-R Juke Leaf Maxima Murano Pathfinder Quest Rogue Sentra Titan Versa Xterra Micra
Peterbilt Porsche Smart Subaru Tesla
Toyota
4Runner Avalon Camry Celica Corolla Cressida Echo FJ Cruiser Highlander Land Cruiser Matrix MR2 Prius RAV4 Sequoia Sienna Tacoma Tercel Tundra Yaris
Volvo
2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000
high speed
wipper
Fixpro256 f1i1x1p1r1o1
HowToAutoRepair h1t1a1r1

Пікірлер: 111
@wendyrussell57
@wendyrussell57 Жыл бұрын
Thank you!!!! Spent 10 minutes being frustrated, then watch this video. Took less than a minute to do once I had the knowledge.
@dmystify1381
@dmystify1381 Жыл бұрын
....dont worry...men get frustrated with em also....🤣😂
@jacobkatari9126
@jacobkatari9126 2 жыл бұрын
Best video ever. It makes sense to replace the rubber inserts only. It saves money and waste of a perfectly good insert holder. I went to the Honda dealer for genuine Honda rubber inserts, two fronts for $24.00.
@Raj-nh3fc
@Raj-nh3fc 6 ай бұрын
Very nice. These shorter rear window wipers are a pain in the neck to refill.
@TheEnvelopeOZ
@TheEnvelopeOZ 2 жыл бұрын
Bro your’e a legend, took me a while to find a good video like this just replacing the fillers, god knows why all the videos out there are videos on how to replace the blades to non OEM ones 🤦‍♂️. Thanks again.
@seangamble6136
@seangamble6136 Жыл бұрын
Eight years later this has helped me thanks alot
@polarnap
@polarnap 5 жыл бұрын
Yet another example of car manufacturers making basic maintenance unnecessarily difficult. Thanks for the video.
@tuttafattylittles3731
@tuttafattylittles3731 5 ай бұрын
Watched about 20 videos on how to replace a rear windshield wiper blade and rubber on my 2014 Honda accent and all of them sucked except this one video so thank you very much sir whoever you are I really appreciate you you are so helpful you explained everything in detail I had no problem and it was so much more clear cuz the other videos are just ridiculously unhelpful. Thank you so much this is a great video please subscribe to him
@fixpro256
@fixpro256 5 ай бұрын
Wow! Thanks for all the nice words. Glad it helped.
@marksolow4721
@marksolow4721 4 жыл бұрын
Much better than most videos. I appreciate the camera work, announcer, and complete coverage.
@Blur125
@Blur125 8 жыл бұрын
Thank you! Just changed the rear wiper on my Mitsubishi Outlander. I bought a rain-x wiper assembly, of which I just took out the wiper insert and replaced my stock one. Very easy with your video, lesson learned for next year though...just replace the insert, not the whole blade assembly.
@fixpro256
@fixpro256 8 жыл бұрын
+Kevin Vellanoweth Your welcome. Isn't it a silly game we have to play. All we need to replace is the rubber, but they make us buy a bunch of metal and plastic also. Thanks for the comment.
@manfredcharles1056
@manfredcharles1056 8 жыл бұрын
I love the way he talks, but more importantly I really appreciated his explanations of WHY to do things a certain way. Even if you're not looking to replace just the blades (e.g., you're just replacing whole wiper), the tip on how to get the back wiper off was worth it.
@yvonnekent1826
@yvonnekent1826 5 жыл бұрын
I’ve just replaced my rear wiper following your instructions ... many thanks xxx
@m.g.auldridge8332
@m.g.auldridge8332 3 жыл бұрын
Easy to follow directions, and much appreciated. When I got the replacement for my rear wiper and all I saw was the rubber strip by itself, I wondered what the heck there was to do !! This explained it all.
@adassa1132
@adassa1132 5 жыл бұрын
Fantastic detailed, well paced video thank you 🙏🏾 please don't delete this video because its very useful.
@quenuk
@quenuk 6 жыл бұрын
Thank you. I was struggling & just about to give up until I found your video! It still took a bit of patience but you saved the day. Next time will be a breeze.
@stephenmay3687
@stephenmay3687 6 жыл бұрын
Exactly what I was looking for. Heading out to replace the refill now. Thank you!!
@UrbanCheese709
@UrbanCheese709 5 жыл бұрын
Great video, saved $10. I used just the rubber from a new blade I had laying around from my previous car.
@peterzeux
@peterzeux 8 жыл бұрын
too good man !! changed my blades refill today.. entire assembly was not available in the market.. a big thumbs up !! thanks!!
@logotgr
@logotgr 8 жыл бұрын
I could listen to you talk all day.
@VictorGonzalez-ip1xt
@VictorGonzalez-ip1xt 11 ай бұрын
❤❤❤ Thank you for your video! I replace the refills on a 2014 Honda Pilot EX. Cost $14.00 from local honda dealer. I didn't need to cut anything! Perfect fit! Thanks again! God bless you, Brother!!!
@jangobaby6812
@jangobaby6812 4 жыл бұрын
Great video! Excellent descriptions and step by step instruction! Thank you!
@douglasglenn7438
@douglasglenn7438 7 жыл бұрын
It worked like a charm Thanks You saved me a heap of money
@The_Crazy_Monkey75
@The_Crazy_Monkey75 7 жыл бұрын
I have always wondered how to do this properly! Thanks for the video!
@RickeyBowers
@RickeyBowers 8 жыл бұрын
Constructive and insightful instruction - made the task much easier and less time consuming than it otherwise would have been. Kind regards.
@russjohnson9330
@russjohnson9330 7 жыл бұрын
thanks for the great video. very clear and well narrated. it's been pissing me off that dealers and auto parts store always push you to buy a whole new blade when all that wears in the rubber insert.
@diegudr
@diegudr 3 жыл бұрын
WOW Great video and thorough explanation. Here is another tip. I just cut the rails that came with the new inserts by putting them side by side with the old rails and marking them and cutting them to the exact length. I never would have just replaced the inserts without your video. Thanks.
@fixpro256
@fixpro256 3 жыл бұрын
Yes. Good tip. I have had to do that from time to time. The metal inserts are made of stainless steel, so they are great to hang on to for making and repairing other things. I have a pile of them ;-)
@louiseroman1145
@louiseroman1145 7 жыл бұрын
fixpro256, You have the patience of a saint. If I only had 1/4 your patience, I'd be doin' great! Thanks for the video.
@alexalmanzar9638
@alexalmanzar9638 3 жыл бұрын
You are the best. Thank you for the helpful demonstration
@jg1way
@jg1way 4 жыл бұрын
thank you very much for this tutorial! It was a huge help to me!
@Ddronron1
@Ddronron1 4 жыл бұрын
Excellent narration and video! Should serve as a model for instructional videos.
@valentinilie1560
@valentinilie1560 2 ай бұрын
Thank you. I was able to replace the rubber so easy, after I wached this video 😊.
@fredstauch9109
@fredstauch9109 7 жыл бұрын
Fred . Excellent instructional video.
@Kayleta
@Kayleta 7 жыл бұрын
this helped me a lot today with my honda fit, thank you!
@Sharpshooter99100
@Sharpshooter99100 2 жыл бұрын
Excellent video, thanks for making this!
@normanddefayette7295
@normanddefayette7295 9 жыл бұрын
Thanks for sharing this very useful tip. I will try this, but with liquid dish wasing soap on the rubber to help the sliding.
@adecallaghan8658
@adecallaghan8658 Жыл бұрын
Thank you, great description.
@Diza_X
@Diza_X 6 ай бұрын
Lmao I feel sтupid right now, I own pretty rare car where I live and I though I need to buy dedicated rear wiper every time. These rear wipers are rare + expensive I accidentally discoved I can take the rubber out. I'm glad I didn't throw out the old one, thank you for this tutorial
@fixpro256
@fixpro256 6 ай бұрын
They can really charge a lot for that extra plastic. And the old ones just go in the landfill. They'll last for several years just refilling the rubber.
@kamanama3671
@kamanama3671 5 жыл бұрын
Thank you for showing me all you got to do is slide out the rubber part and slide it back in instead of trying to dismantle the whole arm and put the whole arm on I wasted so much time watching you as a godsend thanks again
@shannonvance1109
@shannonvance1109 2 жыл бұрын
Very easy to follow! Thank you!
@hardistytoo1712
@hardistytoo1712 3 жыл бұрын
Great easy to follow video. Now I just have to find the proper refills!
@rickdewitt600
@rickdewitt600 3 жыл бұрын
This was very helpful. Thank you.
@ChristianF15cher
@ChristianF15cher 4 жыл бұрын
Wasn’t the same style as mine but this video helped a bunch. Thank you for helping me save time and money!
@NyungSem
@NyungSem 9 жыл бұрын
Very well explained. Thanks very much for sharing your skill.
@tanjachristensen4043
@tanjachristensen4043 3 ай бұрын
Thank you so much! This really helped and made it a lot easier to replace the rubber-thing on my car. Have watched a lot of videos but this one is absolutely most helpful 😃👍🏻
@bmw-e30
@bmw-e30 8 жыл бұрын
Great video---its a job that would be impossible to explain.
@dfzurichch
@dfzurichch 6 жыл бұрын
Thanks, now going out to do rear wiper.
@Nobuts00
@Nobuts00 2 ай бұрын
This video is really helpful. many thanks
@michaelcollura3918
@michaelcollura3918 9 жыл бұрын
Very well done instructions!
@Topexwiper
@Topexwiper 8 жыл бұрын
its really nice,love it so much.
@shanerunciman7960
@shanerunciman7960 6 жыл бұрын
Very useful, thank you
@brianmichaelcohen
@brianmichaelcohen 8 жыл бұрын
Thank you! Very helpful!
@ohhgarcia1402
@ohhgarcia1402 3 жыл бұрын
Helpful video. Thank you.
@rogerserafin
@rogerserafin 7 жыл бұрын
Thanks for the 411. Doing this right now
@ingram10
@ingram10 8 жыл бұрын
just changed a refill while watching this video, thanks for the info
@kiwi-ross
@kiwi-ross 2 жыл бұрын
Thank you and well done!
@KarolKasanicky
@KarolKasanicky 10 жыл бұрын
Very well done, thank you very much.
@pickleme101
@pickleme101 7 жыл бұрын
Very helpful thank you.
@Patriotalliance
@Patriotalliance 5 жыл бұрын
Very helpful, Thanks!
@shukrialshaibani4679
@shukrialshaibani4679 3 жыл бұрын
Thanks great explanation
@mjmakhijani
@mjmakhijani 10 жыл бұрын
Very clear and well explained..
@raphaeldoolichand7109
@raphaeldoolichand7109 3 жыл бұрын
You are amazing sir 👏
@samnz3947
@samnz3947 22 күн бұрын
brilliant video thanks
@johanabell9033
@johanabell9033 5 жыл бұрын
So helpful.thnks
@FreeMind5094
@FreeMind5094 10 жыл бұрын
Thanks, great ideas
@rikyjo8966
@rikyjo8966 4 жыл бұрын
Thank you for the great instruction and terminology beforehand.
@rahmanchaniago5878
@rahmanchaniago5878 3 жыл бұрын
*Thank you, sir!!*
@tuantuan9866
@tuantuan9866 2 жыл бұрын
Thanks👍
@tuongbienhoa7386
@tuongbienhoa7386 2 жыл бұрын
Thanks
@willisbcteoh9840
@willisbcteoh9840 2 ай бұрын
Fantastic thanks 😊
@showgirlsaroundtheworldada4484
@showgirlsaroundtheworldada4484 3 жыл бұрын
Amazing
@TheSteve457
@TheSteve457 9 жыл бұрын
Sweet always changed the whole blade till now
@conner0127
@conner0127 4 жыл бұрын
Thanks ‼️
@petermitchell1662
@petermitchell1662 Ай бұрын
Excellent viseo. I just replaced my rear blad "the hard way" before watching your video DUH.. Anyway, I sprayed a bit of soapy water on the new blasde. Made. it slide a bit easier.
@fixpro256
@fixpro256 Ай бұрын
Good idea. Thanks
@gregoriosantos3143
@gregoriosantos3143 8 жыл бұрын
Two thumbs up!
@ruthau7999
@ruthau7999 Ай бұрын
If I might add, I spray silicone and it slides through like crap thru a goose, but, if you do it dry and you miss a grove I just use a flat screwdriver (very small) to just push the rubber under the plastic lip ... Aloha!
@fixpro256
@fixpro256 Ай бұрын
God idea. Most of the silicones are ok. A few might have petroleum based solvents in them that may cause problems with rubber. A tad of dish soap in water may be safer.
@ellievanderloon7204
@ellievanderloon7204 3 жыл бұрын
Great!!
@heatherclayton3555
@heatherclayton3555 3 жыл бұрын
I will try this on my van.
@76tigga
@76tigga 2 жыл бұрын
great tips. My had to swap out the blade as the wiper attachment on my 2018 CRV had a funky attachment. Bought a new 12" Trico but the whole thing would not fit.
@adrianhains4984
@adrianhains4984 6 жыл бұрын
It looks a bit cumbersome to get the rubber inserts to slide through the claws. Would adding some lubrication make it easier? A bit of soapy water would make it slippery but would still rinse off easily when you're done. I just replaced the entire blade on my car, but will try just the refill next time.
@fixpro256
@fixpro256 6 жыл бұрын
It is a little difficult the first few times you do it. Soap makes it go in the claws easier but it also makes the rubber hard to hold onto ;-) It is a tradeoff between time, convenience, money, and feeling a little better about keeping crap out of the landfill. If you only do one car or truck a year, it may not be worth it to you. I end up doing 3 or 4 a year so it is worth the effort for me.
@derekkchung
@derekkchung 4 жыл бұрын
The challenge I have is to ID the rubber to buy online. They have different width? Mine is off a 2005 mini cooper rear wiper. It measures 6.8mm. Also, can all rubbers be cut to length? It seems some has closed end.
@fixpro256
@fixpro256 4 жыл бұрын
There are at least 3 different wiper claw profiles. (6mm square, 7mm trapezoidal, 8mm square). There may be more. Tricoproducts.com makes the break-to-fit wiper refills that are/were in some auto parts stores. You may have to ask for them at the counter. Some do have retaining ends. Usually only at one end. Sometimes in the metal ribs/slats, sometimes built into the rubber. Put the retaining end closest to the pivot point of the arm (not the pivot of the blade). Cut the opposite end off. Some rear wiper blade (not insert) designs have a tab built into each end that keeps the insert from slipping out. If you have to break one of them to replace the insert, break the one closest to the pivot point. The tab on the far end will keep the insert from slipping out.
@Al-rx1vs
@Al-rx1vs 4 жыл бұрын
Kindly advise how to remove rear waiper motor from glass of Indica Vista and how to refill water for cleaning the glass
@fixpro256
@fixpro256 4 жыл бұрын
Sorry, I have never worked on an Indica Vista
@rlitz99
@rlitz99 5 жыл бұрын
Thank you!
@genoremasciarelli6658
@genoremasciarelli6658 8 жыл бұрын
oblige
@Victic005
@Victic005 5 жыл бұрын
Pain in the ass. But your video helps a lot thanks.
@felinefox4039
@felinefox4039 3 жыл бұрын
Hi fixpro256. Can I refill without those little plastic clips to 'hold it all together' as you say...or will it all just come apart??
@fixpro256
@fixpro256 3 жыл бұрын
The plastic clips just help hold everything together to make it easier for you. So, yes, you can refill without the plastic clips.
@felinefox4039
@felinefox4039 3 жыл бұрын
@@fixpro256 oh yeah! I did it today was just about to leave in the comments that it all went fine without the clips. Was a bit of manoeuvring to get the rubber through along with the metal rails but its all good now and working fine🖒
@ammooorit
@ammooorit 8 жыл бұрын
+fixpro256 I just changed it following your instructions though it was a bit different. Thank you
@fixpro256
@fixpro256 8 жыл бұрын
+Omar Turkostani Most manufacturers have changed to this style, but a few still use the old style that is more like the front wipers. There could also be a few oddballs out there ;-) What type of car do you have?
@ammooorit
@ammooorit 8 жыл бұрын
+fixpro256 My dad's car is a 2006 toyota previa, it has two rails as your video but without the plastic clips and only three claws not four.
@fixpro256
@fixpro256 8 жыл бұрын
+Omar Turkostani I did an image search for that. Looks like some use the new style and some use a strange style I have not seen. The arm style will depend on the manufacturer. I noticed some of the blades have 3 claws and some have the 4 claws. The number of claws will depend on who makes the blade.
@Figo90210
@Figo90210 4 жыл бұрын
5 stars
@Swent954
@Swent954 4 жыл бұрын
Where can we order the steel rails online
@fixpro256
@fixpro256 4 жыл бұрын
I haven't seen them online. But I haven't looked. They come with every standard wiper you buy, but they are various widths depending on the wiper design. I like to keep them when I throw a wiper away because they are made of stainless steel. They are handy for making parts for other projects.
@Swent954
@Swent954 4 жыл бұрын
And where to get the plastic clips also
@fixpro256
@fixpro256 4 жыл бұрын
The plastic clips only come with the break to fit wipers.
@Swent954
@Swent954 4 жыл бұрын
@@fixpro256 I am sorry, which break
@felinefox4039
@felinefox4039 3 жыл бұрын
Yes! this is what I wanna know. I bought some refill rubber on ebay and it's VERY rudimentary. ZERO FRILLS deffo no plastic clips. I tried to look up 'plastic claw clips wiper refill' and got nothing but some weird hair clips..So if you ever worked this out Ali lemme know!
@Jeffdachefz
@Jeffdachefz 8 жыл бұрын
nvm other options work much better
@petroflorence7962
@petroflorence7962 Жыл бұрын
Wet it
@Jeffdachefz
@Jeffdachefz 8 жыл бұрын
buying a new blade.... not worth the effort.
@Chaser2
@Chaser2 4 ай бұрын
Dislike. Not any help
Replacing REAR Honda HRV Wiper Blade Rubber Insert
10:45
Soundmisen
Рет қаралды 4,4 М.
Clowns abuse children#Short #Officer Rabbit #angel
00:51
兔子警官
Рет қаралды 77 МЛН
Как бесплатно замутить iphone 15 pro max
00:59
ЖЕЛЕЗНЫЙ КОРОЛЬ
Рет қаралды 7 МЛН
路飞太过分了,自己游泳。#海贼王#路飞
00:28
路飞与唐舞桐
Рет қаралды 17 МЛН
Best TV News Bloopers Fails 2017
25:27
Funny Local News
Рет қаралды 57 МЛН
How to Replace Wiper Blade Refills - Inserts
4:57
Know How Now
Рет қаралды 112 М.
20 Ingenious Tips & Hacks That Work Extremely Well
17:53
Anna Home
Рет қаралды 18 М.
How to Fix Wiper Noise Permanently with a Crescent Wrench
3:16
How To Replace A Wiper Blade Rubber refil insert
7:04
GarageTech
Рет қаралды 70 М.
How to change your Wiper Inserts on your Toyota
5:54
The Car Care Nut
Рет қаралды 260 М.
STOP windshield CRACK from Spreading
4:43
sixtyfiveford
Рет қаралды 81 М.
ФЭТБАЙК vs MTB Что лучше ? #shorts
0:21
Леха МАК
Рет қаралды 915 М.
Не хватило бензина встал на трассе
1:01
чоооооооооооооо
Рет қаралды 2,4 МЛН
Суперкар DS на 1400 л.с.
0:46
Vladione
Рет қаралды 1,4 МЛН
Злая Ауди vs Пассат! Оживление корча и заруба на треке!
1:28:47
ИЛЬДАР АВТО-ПОДБОР
Рет қаралды 2,4 МЛН