It was Livestreamed like 2 weeks ago

@@beni2cc Do you understand sarcasm?

@@TobyDHK hold up I commented on the wrong comment, There was a comment that said "how come there is comments older than 15 minutes, when this video was posted 15 mins ago"

@@beni2cc It was Livestreamed like 2 weeks ago

@@beni2cc Well isn't this a bruh moment

Spoiler alert much?

Gotta recoup that 40 grand per camera !

@@LReBe7 Not really, the dropped it part might be a joke and if it isn't, well it's Linus we're talking about! :D

I am here 6 months in the future, it is now watercooled.

He dropped it.

Trying to water cool itself before Linus gets his fingers on it?

@@PerplexedPhoton Wets itself... Same difference I guess.

I was the 420th like!!

How can it sweat if it isnt watercooled?

i know right, ive waited so long. Now i finally have the rest of the guide for puting my Red 8K together, The watercooling was easy enough but all the ribbons man.

Agreed

Yeah...it's been so long and it looked so stupidly annoying to put back together.

Joe Rogan watches Linus tech tips?

@@starballs2009 He was only real for one second though.

@@starballs2009 Everything is interesting when you're high on DMT.

Hermes: they actually don’t water cool a nuclear reactor. When an xtra neutron makes the core unstabel it splits in two. A lot of heat is produced. It is placed in water and this water gets hot, the water becomes steam and with that steam can power be produced in a generator. The water is not there to cool the uranium, but to produce the electricity.

GGBeryllium so... no Brains? Cooling is to cool it, this isn’t to cool it of ma dude... it is to generate xtra power

HKR GAMING HKR GAMING HKR GAMING “power output” and “pressure” are both effects of more water evaporating. So it’s not absence of cooling, but rather increased reactivity (i.e. more and faster core split) in the reactor’s core that’s responsible for what you describe. If there was no cooling, the core would just melt down (and not explode btw)

Wisse van Duin It can still be seen as water cooling as the water is used to produce power but also keep the temperature down. The water is needed to prevent a meltdown unless all of the control rods are inserted. Water cooling that generates electricity.

Nuclear heats the water. Water evaporates to steam. Steam runs the turbine. But steam can't flow if it's hot everywhere. So we cool down the process so turbine keeps turning. Efficiency is about ~39% and the rest we have to cool out.

What's its and thingamies are also valid descriptors.

Three very good friends.

something tells me you're jealous

"USED TO" did they fire u because u got frustrated trying to attach the bottom gasket

Should I take apart a Red to join the team at Red Digital Cinema? Or is there a specific career path?

HIS FACE HAD ME DYING

there couldn't be a video with linus without something dropping in it

😂😂😂

I need two volunteers(nobody volunteers) You, and You.

Ok,... this is how you are gonna pay me back for the thousands of dollars of machining equipment I bought for you.

considering he just got a workshop ya gonna see him do some heavy lifting around for a bit i wouldn't doubt

The Canadian term for this is voluntold.

@@kylemcisaac also a us term in the military.

Every electronic is slightly different due to manufacturing tolerances, so although we have the same camera it might run slightly hotter, or have marginally worse low light performance. Same reason that some processors can overclock better than others. -AC

Linus Tech Tips what's the most expensive thing Linus or anyone has dropped and/or broken?

@@LinusTechTips You really think it's reasonable to assume the tolerances between two cameras from a quality controlled production line are greater than the tolerances between a camera before and after an "amateur" dis- and re-assembly?

@@amw6394 his wife

PrimitivePeople 😂

there is a comment from one on this video, he said they did good (and even for them it takes 45 minutes)

666Tomato666 I concur. With said mention of said comment.

I don’t know what I want but it was a great way of keeping the fun of my music in my tum was a great way of seeing a great movie in my vmware is that we have a good one in our lives we will have just bought one and a half of the time of our game but we are in a bad game so we have just bought one game for that one time but it will not do the other things but it will not be the game for that the next one will get the way of it to you guys to get this message

​@@efeberknisanoglu6379 bless you.

You just repeated Linus' comment at 10:13

No, that would be every ex girlfriend they have. /s

@@efeberknisanoglu6379 aynen birader

I wouldn't.

Then we wouldn't get these great videos

They commented on the previous video where they took it apart

Idris Abdullahi don’t click on that link, 99% chance it’s a virus

@@BobHolowenko i can't find they'r comment haha

I think they just forgot to edit it out or something

@@znojnyj unlikely to be honest, probably put it in to tease the watercooled red camera video.

Timestamp anyone?

kzfaq.info/get/bejne/mrenZ9pqvM28k4U.html he does in this one as well at 4:34 and 6:52 and 9:38 and a few more

@@rammingtime Seems kinda rude if you ask me! :/

I'm evenly split between giggling and cringing. Maybe a sob or two.

And then being split even more when the camera seemed to work just fine after reassembly....

Yeah. They just reassembled it to disassemble it later. Dafaq is right on course. Alex will have his plate full, I guess.

Unfortunately the results of their baseline tests will be skewed due to the thermal paste getting all garbled. Also sitting exposed to open air for six months can't be good for it... Just my thoughts, I know next to nothing about thermal compound.

My thoughts

Not to mention how stupid the idea is. The main source of heat would be the sensor, how are they gonna watercool that? Cooled cameras used either passive (lots of heatsinks) or active cooling, where fans and freezing the sensor is involved. No one uses water.

@@diatomsaus that's why he's doing it, isn't it?

Glen! This is the Canadian crossover we've been waiting for.

Banned from what? Buying more cameras?

@@aDifferentJT Twitter, Facebook, Instagram- and don’t laugh he has banned people from buying their cameras.

@@GlenAndFriendsCooking Why did he "Ban" you brotha? If you don't mind me asking 🤝

Haha , finds out later it's the screen retaining screws , after screen flops out , yanks ribbon cables and falls right in the bathtub

I hope your not a Boeing technician..

@@mikester1290 no doubt , haha . I'm afraid to fly now , thanks.

Lmao

I disassembled a Bridge Camera and was left with one screw. Started all over and now they are all inn.

Even for those of us who make more than 40k thank you for putting this back together.

They'll take it apart again someday ;_;

Don't forget to thank them for taking it apart, or you wouldn't have the opportunity for thanking them for putting it back together. It'll be fantastic to see the water cooling experiment though. Hanging out for that along with everyone else.

Few! Until I read your comment, I thought I was going crazy, because I saw the live stream too and was wondering why that video was not that "new" for me...

Wayazaexa at least now you don’t have to read people spamming *YOU IDIOT DUDHEBIDKDJD YOU BROKE THE CANERA FJDNDNDJ YOURE SUCH IDIOTS OMFG HEBXKSNEVSJDNVDBX* in the chat

I was like ‘Dejavu’ and then I was like oh yeah ‘Live’ Still amazing to see and it worked. Cool

Not in this case. It's to reduce noise. They talked about this in the previous video. Specifically citing how they don't expect any performance improvement (given their use case, I don't see much room for improvement), and that they are super loud when shooting.

Thank you Sherlocks!

@@hkr1276 You are most welcome! Glad you appreciated the efforts.

Sounds familiar.

lmao

camera costs 40k yet they used cheap materials? nice nice...

Wait really ? I didn’t know they were that crappy of material

Cameron7127 it’s not that they are crappy, on the contrary actually they’re nice for that specific application. The connector itself is just delicate because it’s not meant to be opened and serviced by anyone other than RED really. It’s a Hirose connector if you wanna read up on it more. They’re specifically made for imaging applications

ItS nOt LeGoS iTs LeGo

Lol

10/10 Reply, thank you for this.

Anthony Russo it’s legos in some country

@@davidybarra842 nope

lmao

nah mate, wallmart pc is always a better choice than building one yourself

The best gaming pc is always a mac running linux from 2009. It doesn't get any better than that.

20$ is 20$

SelloutTechTips©

@@nayn9832 can't argue with the money

They usually use bigger cameras than red

@@The-Urban-Goose red is the top of the line at the moment

@@KnowledgePerformance7 no, Hollywood rarely uses red. they shoot on arri or film (which is also shot on mostly arri cameras)

@ِ ِ While true for very big productions, a vast majority of mid scale shoots use things like Red and Black Magic. The brain alone in an Arri camera is nearly $100K

@@Evildandalo they dont buy the cameras for shoots, and we were talking about Hollywood not low budget films.. a very big amount of oscar winning movies were shot on arri or film..

great value!

Ya that makes zero sense to me. Also he probably could of sent it to red and had them reassemble it for him since they allow you to mod the red camera.

More like "Spends $40,000.00 USD on a red camera, and then disassembles it, chucks it in a bin, and leaves it sit in a warehouse for six months where no one can use it." That's the ultimate "Lick the cupcake, so no one will eat it" move.

They have a second one I think

i think in those 6 months Alex was working on the cooling assembly

but if they can pull it off by themselves they can totally put that as a figurative badge on their coats.

@@sadhlife I am sure they can pull it off. But the rest of community and LTT would certainly benefit from iFixit's amazing documentation of the tear downs.

Imagine those guys who assemble those cameras day in day out. They are either grinding their teeth to oblivion or rolling on the floor laughing

or crying

Or all of the above

At last When Linus decide to disassemble red camera be like : ah shit here we go again

Level 11

Except the manufacturers.

ew weeb

i see ur a weeb of culture as well Mai-san❤️

@WhiteFog thats not really the same effect but ok

@@lucasc5622 2D>3D (not actually,cuz i have a gf)

Naaah, the stickers are still in tact!

@@h33p but this video is up

Considering how much free promotion Linus has done for Red, it would be a dick move of them not to cover the warranty

@@h33p The stickers don't mean shit. Manufactures have to honor warranty. The sticker shit is actually illegal (at least in the US it is).

@@janemba42 in a few month, "Red REFUSED to fix our 40k Camera"

FOR ZE KLICKZ

Yash Nayakawadi I order parts, and just replace them to the lasted model, i never need a guy to do that! Red support this heavily!!!!! Still getting support if i fail on the upgrade jobs, linus knows that too!

Man they make a killing by stealing

@@renkei7864 I got an origin.... I really enjoy it too.... It was the cheapest option / best deal at the time ironically.

Wow, converting to Au dollariedoo's it's still overpriced.

Lorin H it's better just to throw something together yourself tbh they ways change extra for prebuilts up to 100 dollars and not including shipping.

I'm glad I built mine custom... RTX 2080 8gb I5 9600K 1Tb $1300..

fortunately warranty "void if removed or damaged" type stickers are illegal. So it doesn't matter. If RED refused to honor a warranty based on that, then LTT and the thousands of lawyers waiting for the opportunity, would jump on RED and sue them into nothingness.

Martin B Warranties can be voided if you’re opening it in order to modify it. Those stickers are only illegal if you’re fixing something.

@@Adam-vp4pv Hence why I did not go so far as to talk about modification. Because damaging or removing a warranty void if removed sticker is separate legally from repairs or accidental damage due to attempted repairs by an unauthorized person while the product is under warranty. With that said my comment was more specific to the current context which is that they opened it up, disassembled it and put it together again. Within that context, if they were to have their warranty voided it would be illegal. Perhaps I should have been clear on that. On a separate note, modification depending on the type may still fall under being safe. If modification does not extend to changing the products existing solid structures and is reversible without damage to any electronics or the devices physical appearance internally or externally. Then it would be fine. So as long as they do not physically modify the chassis or cause damage during their installation of water cooling. Then it is still perfectly fine as long as they can reverse the change and have no damage caused.

Why would RED not want to fix Linus's camera.. It's Linus Tech tips they got so much free press about them.. I never knew of Red till Linus.. Now is not the place for them to stop looking good. All they have to do is just say, this is not the thing we normally do... please don't do what Linus does..

@@baloneyjusticecheezedog Tell that same thing to Apple. Also if Red really cared they would have sent him some of their stupidly expensive stuff for free or at a discount by now. Their market is not people at home watching Linus doing silly things.

It's not the only red camera they have

No silly, they got 2 red cameras!

Guys, he's not wrong tho. That is $40,000 dollars idle. 69D CHESS

Doesn't everyone buy a $40k spare parts camera?

I can hear the laughter and tears from here in texas.

I was going to make a joke about how Chinese task masters wouldn't let the people who make the cameras watch KZfaq. But I found out that the cameras are made in Irvine, CA. petapixel.com/2017/11/30/red-cameras-made/

@@jackielinde7568ok

Assembly line?

Advocatus Diaboli they are made in Cali and look at corridors vid on why it’s not overpriced and why he made himself look dumb for complaining about the price of it

*to assemble damn expensive electronics.

It's also the cliffhanger factor. Hanging on a cliff for six months is a long time.

Cliffhanger factor doesn't matter if all you're trying to do is get people to click on the video

how ?

hey justin

how

How

Hello Justin nice seeing you here

its "I understood that reference" not understand (assuming you are referencing the avengers)

I didnt

@@NukeTheOG I think that this was a livestream that youtube messed up so after they went offline the archive never went up or was corrupted, not sure what it was, so they decided to edit the livestream into this video.. so it's the reassembly of a stream about reassembling.

@ I think it is more simple: "Reassembly RED" means put back it back the camera. "Reassembly stream" is how they did it, Linus literally watch a piece of stream to assemble the camera

@@Dominus_Potatus No, César's mostly right. They livestreamed it, didn't publish the livestream to KZfaq when intended, so Linus had the editors take the livestream footage apart and reassemble it to be closer to the size their normal videos would be, so it would be more easily digestible for people to watch. Lots of people want to know about the RED Watercooling project, and a 2+ hour livestream may not be the best method of providing an update to most. Thus they Reassembled (after cutting it down and pulling out the parts with little to no content) the RED Reassembly (because they put the RED Camera back together) Stream (Because this was livestreamed, on June 21st kzfaq.info/get/bejne/p8mYpbWLnLSrl40.html ).

This is the edited version of the 2 hour live stream. So you did see this before.

Lol not 40k anymore

Or if you move the assembled device and hear parts rattle around inside ;)

@@MarcoTedaldi or if you get all the way there and done and it just won't work

Red: Did we just see you upload a video taking apart our 8k camera so that you could water cool it? Linus: You didn’t. YOU DIDN’T, BECAUSE IT’S NOT THERE

God bless you

Ocea, thats a bit much XD

Graphite tips...

You'll have to blame past Linus for that

@@fabianlaibin6956 you can blame future linus too, he do that again.

No

Just get some flex tape

@@Yaboyshock hahaha

you can get child custody if you show your baby moma twerking on twitter, life hack.

Dad is that you?

I think it's Kyno lesspain.software/kyno/

It's because it was a live stream and they edited it

S I know I watched the whole stream it was pretty fun

evandarkfire What was that thing that fell over?

and then taking it apart again... and then reassembling it with watercooler .... and then probably taking it apart again since it doesn't work

@@ThunderDraws Hahaha ye exactly

I think context matters. They may have been the slowest out of that batch of high-end computers, but they are fast compared to your average OEM.

Also I watched the ad three times, and them being ''fast'' was never mentioned.

but the good thing is you are allowed to cheat from your notes

Nah, couldn't do that. It's already watercooled and it's too heavy for Linus to drop it.

@@arenacloser7528 hahahahahaha

@@arenacloser7528 LOL!

The first gen Audi R8 V8, very good idea for james may reassembled season 3 :v

Idris Abdullahi stop posting your virus all over the place

They have different reds, maybe they dint have that one twice

even the exactly same camera can run different temperatures. silicon lottery

It's not just necessary about the file size limits of the File System. I guess it's more about the reliability of the file produced. Easier to read, write, save. Eventually if one gets corrupted it's not the hole shooting.

@@hegeduslevi its for import taxes. If cameras record over 4gb then they pay another import tax so the file splitting is a workaround. DSLR's do the same thing.

İts because Redmags scam for forcing you to buy their software and drive totally scam

That way it'll be done correctly and there won't even be any missing/extra screws. 👍😉

Literally scrolled down 2 minutes in to comment this XD

No you're right. They do have 2 of them (well they recorded it with one of them and disassembled the other one, that's why they have to use that fancy software), but performance varies even across one model (similarly to how some CPUs can be overclocked better than others), because of the physics of the manufacturing process, so they wanted to benchmark the exact camera they were going to watercool. They answered a similar comment above, that's how I know.

KubeSquared it has beefy heatsinks inside that could be replaced with blocks and then you just drill holes in the casing. Or something.

Custom heatsinks with the new workshop they have

Well they bought loads of new equipment for their workshop for a reason(s)

Yea, but then you have to carry around water...in addition to the camera. Not sure that's a win....

@@jakesully2868 how dare you state the obvious!