No video

Rebound Damping in the Forks

  Рет қаралды 58,600

BikeRiderTV

BikeRiderTV

Күн бұрын

Robert Taylor of Kiwi Suspension Solutions explains Rebound Damping in the Forks

Пікірлер: 10
@TheCookieZone
@TheCookieZone 4 жыл бұрын
Honestly I rarely post comments but amazing footage/explanations! Simply and effective.
@GinjaNingerMan
@GinjaNingerMan 7 жыл бұрын
Thanks for the easy and understandable video - But a suggestion: Could you form a playlist that has all of your suspension videos so we could watch them without having to search your channel for them? And while you're at it, might as well do various playlists for the videos that relate to each other.
@GaryHemitt
@GaryHemitt 10 жыл бұрын
useful info, helps me with my settings. it didnt occur to me that there was anything to bear with in your video until you mentioned it.
@zeuth_Sengsou
@zeuth_Sengsou 10 жыл бұрын
Helpful video.
@RemetinecBoys
@RemetinecBoys 10 жыл бұрын
How come that Dave Moss is pulling the front brake and You suggest not to?
@doctorhelicopter
@doctorhelicopter 6 жыл бұрын
If the bikes light enough you can balance it and push down on the bars and pegs simultaniously, then see how it is with the brakes on aswell
@HideHairLoss
@HideHairLoss Жыл бұрын
Thanks for the video. May I trouble you with 2 questions regarding my '07 R6: 1) Is it ok to use the paddock stands when setting front and rear rebound? 2) My fork rebound adjustors have an obvious full-out endpoint, but don't seem to have a definitive full-in endpoint. (All the other suspension adjustors have an unmistakable endpoint for full-in.) Instead, it gradually gets tougher to turn at about click 38. To put it in some sort of perspective...from full-out, as I dial in everything remains consistent until about click 38, at which point noticeably different resistance is noticed. Up until about 42, it's possible to turn it using downward pressure on my thumb. From there on, a screw driver or key is needed and at about 46 you have to use more than a 3 fingertip grip on the screwdriver. I've taken it in as far as 51 from full-out without arriving at a distinct end, hearing anything break, or experiencing irreversible effects after dialing back out. Should I just keep going till it stops; will there for sure be a distinct end point?
@wisbalaa
@wisbalaa 7 жыл бұрын
what is the setting on the Rebound damping for the Forks on Track Mode riding? I don't think it was mentioned ... great video regardless
@colinbrown9564
@colinbrown9564 4 жыл бұрын
Hi I know there is a preload adjuster on the rear shock, but I can’t get the correct sag. When I take the preload to minimum I can see 3 threads above the mechanism. Is there any way to use that full potential.
@PaoXiong86
@PaoXiong86 Жыл бұрын
so basically maximum soft?
Motorcycle Suspension Adjusters: What Why Where and How
15:47
Dave Moss Tuning
Рет қаралды 396 М.
Motorcycle suspension explained - and how to set it up
16:53
Nomad Sweden
Рет қаралды 66 М.
Joker can't swim!#joker #shorts
00:46
Untitled Joker
Рет қаралды 39 МЛН
Чёрная ДЫРА 🕳️ | WICSUR #shorts
00:49
Бискас
Рет қаралды 4,7 МЛН
How To - Setup Motorcycle Suspension (PART2) Compression & Rebound
14:30
Tech Tips: Setting Up and Adjusting Motorcycle Forks
8:25
Vital MX
Рет қаралды 321 М.
Motorcycle Suspension Terminology Explained | The Shop Manual
7:22
How To Adjust Your Rebound And Sag On A Motorcycle
26:30
MotoJitsu®
Рет қаралды 299 М.
How To Use Rebound Damping » ACADEMY | FOX
3:41
FOX
Рет қаралды 211 М.
setting suspension sag
9:18
BikeRiderTV
Рет қаралды 353 М.
Motorcycle Suspension SAG Adjustment Street
9:50
Rod Rides & Wrenches
Рет қаралды 35 М.
How To Setup Motorcycle Suspension Sag Rebound Compression Damping FZ09 MT09
37:28
Joker can't swim!#joker #shorts
00:46
Untitled Joker
Рет қаралды 39 МЛН