No video
Rebuild/Update: WE/HK3P A1A SAI RMR Glock 19 GEN3 build - New outer barrel and RMR sight [4K]
Рет қаралды 15,417
Күн бұрынPLEASE READ THE DESCRIPTION!
NOTE: This is an airsoft video!
In this video I do an overview of my beloved WE/HK3P Ace 1 Arms SAI RMR Glock 19 GEN3 build and install a new ACM RMR sight as well as an A1A threaded outer barrel.
Ace 1 Arms Glock 19 threaded outer barrel (eHobbyAsia): goo.gl/bgxxDh
ACM RMR 2016 version (BoomArms): goo.gl/bhvfRN
^^ Not the one in the video but this one is better!
Ace 1 Arms SAI RMR Glock 19 playlist: goo.gl/ni4KfH
Hope you guys enjoy! Please remember to subscribe, like and share!
Website: www.nonexistent...
KZfaq : / cjawesome83
Facebook : / nxairsoft
Twitter : / cjawesome83
Instagram : / cjawesome83
Google+ : www.google.com/...
@Race9988 4 жыл бұрын
The dot flaring out that your talking about is called starburst affect. That happens when its turned up all the way. Also when looking down your iron sights the dot isnt supposed to land directly on your front sight post. You want typically want a lower 1/3rd co witness. Nice build man
@turtle_6067 3 жыл бұрын
I didn’t know you were from Sweden, cool
@CJAwesome83 3 жыл бұрын
Yes I am :-D
@gabrielchcosta 4 жыл бұрын
What a beauty! Great job.
@CJAwesome83 4 жыл бұрын
Thanks! :-D
@lunarskies3793 5 жыл бұрын
with the build quality on this i deadass thought that this was almost a real one LOL
@CJAwesome83 5 жыл бұрын
I will take that as a compliment :D
@edmondfromyt9764 7 жыл бұрын
Wow this glock is damn nice keep it bro
@Beanland280 2 жыл бұрын
Love the build man
@CJAwesome83 2 жыл бұрын
Thanks!
@i-_-am-_-g1467 3 жыл бұрын
You was meant to use a cr2016 battery and not a cr2023 Same voltage and same diameter except it's thinner.
@CJAwesome83 3 жыл бұрын
That's a very interesting point actually. However, both the real Trijicon RMR and the airsoft replicas state that a CR2023 battery is to be used. CR2016 has about half the run time of the CR2032.
@gango5040 Жыл бұрын
Where can I get a glock case with all the stuff?
@mag989mmpara7 Жыл бұрын
What's the slide and barrel ?I don't have found this kit .
@MrBrad0005 3 жыл бұрын
Why don’t you Make anymore Videos?
@nc_hk 2 жыл бұрын
nice, do you have a parts list for this
@Watch_spike 6 жыл бұрын
Great video! Hey man I’m your opinion what is the best platform for an SAI Glock 17 build?
@CJAwesome83 6 жыл бұрын
Hmmm, probably TM Glock 17 with Guarder upgrade parts and SAI slide kit.
@conor3932 6 жыл бұрын
Didnt know real steel base plates work on airsoft guns wonder if my kwa atp will work
@CJAwesome83 6 жыл бұрын
Haven't actually tried on a KWA magazine but AFAIK only VFC/Stark Arms and Guarder Custom TM Glock mags accept real plates.
@hunterkell6362 6 жыл бұрын
Sup bro anychance ur gonna do a build out of a TTI or the new RWA 34/26 slides ? Id love to see a build like that
@CJAwesome83 6 жыл бұрын
Nah, not really my style. I am happy with this build :D
@ibashyougood 6 жыл бұрын
Tjenare, Riktigt bra videos! Har du några bra tips på vart jag kan hitta uppgraderingar till VP9 och VFC glock?
@CJAwesome83 6 жыл бұрын
Tack! Finns tyvärr inte speciellt mycket, om några, uppgraderingar till någon av dem. VP9 har lite externa delar som jag har videos på men VFC Glockarna finns det typ ingenting till.
@ibashyougood 6 жыл бұрын
Tråkigt att höra!! haha, får väl ge mig på att göra delar då :P du vill inte sälja Glock 19 SAI slidern eller ;-)
@CJAwesome83 6 жыл бұрын
Neh, never!
@andrewchou9099 7 жыл бұрын
nice vid man, i'd like to build a glocktoo but i dont know whether i should build on kjw or we, which one is better in your opinion?
@CJAwesome83 7 жыл бұрын
Hrmmm... I mean my Ultimate Guarder Glock 19 GEN3 is as the name implies, ultimate :p But a WE Glock build is also a good choice with lots of options for aftermarket parts and slides and 99% compatible with Guarder/TM parts so. Depends on what you want to build?
@andrewchou9099 7 жыл бұрын
just found out that Guarder also made a glock 23 steel slide as well as 19 and 17. So, I think I will go for the 23 since it's identical to the the 19 but I prefer 40S&W than 9mm. I recently heard that WE tech goes a little bit more proprietary lately while kjw still keep their faith in TM system and I have never got my hands on a kjw before so now I think it would be a good opportunity for me and kjw g23 :)
@CJAwesome83 7 жыл бұрын
Sounds like a plan :D
@dantardis9419 7 жыл бұрын
what has happened to your A1A agency arms style glock u started to work on in one of your old vids i was just wondering if u had finished it yet or will be finishing it sometime because it started to look good and then u stopped with it
@CJAwesome83 7 жыл бұрын
Yeh. It's in parts inside of a plastic bag waiting for some attention :p Got a lot of other things going on and it's not my top priority right now.
@pherakyflow 7 жыл бұрын
still waiting brooooo!!!
@CJAwesome83 7 жыл бұрын
Yeh that dang Agency Glock is still in a bag :p
@pherakyflow 7 жыл бұрын
that is not how you treat glock man :(
@Lex41710 5 жыл бұрын
Can you get airsoft slides cut for a Glock already?
@CJAwesome83 5 жыл бұрын
I am not sure I understand the questions.
@piovvy3602 7 жыл бұрын
Hey man I have a question, do you know if guardar parts such as frames and slides work on We glocks?
@CJAwesome83 7 жыл бұрын
Yep they do. But not the Guarder Glock 19 frame because that is KJ specific.
@christopherjiava8974 6 жыл бұрын
looking to do a similar build around how much money would it cost around? thanks
@CJAwesome83 6 жыл бұрын
Base pistol is around $110 USD, slide kit is anywhere from $120 to $250 USD and then various parts and accessories another $100-$200 USD for a total of $330 USD to $560 USD... :o The Ace 1 Arms kit was $195 USD when I bought it so... But it is no longer in production and sold out.
@christopherjiava8974 6 жыл бұрын
ok thanks, would you ever consider selling? :D
@CJAwesome83 6 жыл бұрын
Nope! One of my absolute favorites :D
@christopherjiava8974 6 жыл бұрын
lol, thanks :D
@mperez_22 5 жыл бұрын
how long was the shipping from boomarms?
@CJAwesome83 5 жыл бұрын
Hrmmm... They're average. 1-2 weeks or so from them to Sweden.
@reveriem6874 6 жыл бұрын
Hi there, do you have any opinion on the a1a agency arm slide kit ?
@CJAwesome83 6 жыл бұрын
It's a great kit and it's my favorite airsoft build that I have done. Highly recommended :)
@reveriem6874 6 жыл бұрын
Non Existent do I need any modification if I use the stock we g19 frame?
@CJAwesome83 6 жыл бұрын
Nope.
@reveriem6874 6 жыл бұрын
Non Existent alright thx :)
@wickedsick773 3 жыл бұрын
Is there atm any site where i still can get a slide kit like this? XD
@CJAwesome83 3 жыл бұрын
Nope, these are long gone. Most new kits are for the VFC/Umarex or TM Glock models.
@willigm1990 6 жыл бұрын
Is it possible to get this outer barrel now?(Or any thread barrel for WR G19?
@CJAwesome83 6 жыл бұрын
Nah the barrels are no longer available for sale :(
@willigm1990 6 жыл бұрын
Non Existent no more threaded barrel:( Still, thanks for answered the question. I might find someone to thread a G17 barrel for the G19.
@mkyt206 5 жыл бұрын
Does we g19 accept the same bbu as we g17?
@CJAwesome83 5 жыл бұрын
Yep!
@mkyt206 5 жыл бұрын
Non Existent thanks
@ChanChan-uv3ql 6 жыл бұрын
Do u use it much for gameplay?Btw can u film gameplay videos next time?
@CJAwesome83 6 жыл бұрын
No, I don't even think I have fired it with BBs yet :p I don't play airsoft.
@ChanChan-uv3ql 6 жыл бұрын
Non Existent when do u stop playing it?miss ur videos
@CJAwesome83 6 жыл бұрын
Oh, I only played for a short time. Mostly not play airsoft :p I am too busy with work to do videos. I have some recorded that need to edit and upload :|
@ChanChan-uv3ql 6 жыл бұрын
Non Existent maybe u should open a gbb shop urself
@CJAwesome83 6 жыл бұрын
Hehe, that was actually my dream when I was younger before I got a job to have my own GBB/GBBR only airsoft shop :p But the competition is too much and it's a lot of hard work so naah.
@jayweezy3264 5 жыл бұрын
do you know of anyway of making the g19 full auto?
@CJAwesome83 5 жыл бұрын
Buy a WE Glock 23 :D It is ful-auto model.
@jayweezy3264 5 жыл бұрын
@@CJAwesome83 Can I transfer a we23 internals over? and what do I do without the full auto selector?
@jayweezy3264 5 жыл бұрын
thanks for the prompt reply btw. :)
@brokenmechanics1772 6 жыл бұрын
Was this built from a WE G19 Gen 3?
@CJAwesome83 6 жыл бұрын
Yep! :D
@brokenmechanics1772 6 жыл бұрын
Non Existent One more question. What WE Glock is the best and/or the most customizable?
@CJAwesome83 6 жыл бұрын
WE Glock 17 no doubt. Pretty much fully compatible with TM Glock 17 parts which has a ton of aftermarket support. But I really prefer the compact size of the Glock 19 so that's why I use that for my builds :D WE Glock 19, 17 and 34 should be about the same for what you are asking but if I had to say one clear winner it is definitively the WE Glock 17.
@brokenmechanics1772 6 жыл бұрын
Non Existent Thanks!
@ChanChan-uv3ql 6 жыл бұрын
you're1hellOfaBastard do tm aftermarket parts(e.g. slides) need modification in order to fit the gun?
@cristianj.9623 5 жыл бұрын
If you ever decide to sell this item please contact me. paypal ready
@CJAwesome83 5 жыл бұрын
Probably one of the last guns in my collection I would consider selling :p
@cristianj.9623 5 жыл бұрын
Lol. Can you send me a full parts list if you don’t mind. Would love to build one. Thanks! Love your channel btw! (New sub)
@CJAwesome83 5 жыл бұрын
I have a playlist with a lot of videos on this specific build that you would probably enjoy and it will also cover all the parts and upgrades I have made to it :D kzfaq.info/sun/PLz5FTS2XoXauOPj1YP5OVHmKWlyyfC17z
@cristianj.9623 5 жыл бұрын
Non Existent ty!
@MrPang2128 7 жыл бұрын
Look like heavy...
@CJAwesome83 7 жыл бұрын
Nah it's not too bad. The slide and barrel are very light actually :D
@mag989mmpara7 Жыл бұрын
Do you have any FB contact. I have a few questions regarding the construction of the G19 WE gen 4 replica. Please contact me. Regards
Insider
Рет қаралды 47 М.
Garand Thumb
Рет қаралды 3,2 МЛН
Kentucky Ballistics
Рет қаралды 2,2 МЛН