Rebuilding A Totaled Dry Van Utility Trailer (PART 2)

Рет қаралды 76,011

5 жыл бұрын

Swift truck?? This this is CRAZY! Cant wait for part 3 and to see how it will turn out!!
PART 1
• Rebuilding A Totaled D...
We never done this before but we bought a trailer and decided to rebuild it. We picked it up at Copart Auction. Its a 2015 Utility Dry Van 53 ft trailer. We are excited about this and i hope you guys are also!
Like, comment and subscribe
Become a patreon:
/ autorebuildsgarage
Email: Autorebuilds509@gmail.com
Follow us on Instagram @ auto_rebuilds_garage
Support us by getting our merch!
teespring.com/stores/auto-reb...

Пікірлер: 111

@Aninebula Жыл бұрын

as a box truck/trailer tech it hurts seeing them grind and punch with a hammer the steel and aluminum rivets use an air chisel to cut the outside off And the punch to pop the rivets out the skin panels and side post lol

@andrewbarowski554 5 жыл бұрын

Thank you guys for amazing work and sharing yours experience.

@romantheegreat208 5 жыл бұрын

Yea man no problem! Thank you for watching!

@yebelcampos6248 3 жыл бұрын

Beautiful job handsome young boys. God bless you. Persuade your dreams.. I see owning your shop

@Robertshorts46 5 жыл бұрын

Looks really good great job guys

@dmitriisavelev6556 5 жыл бұрын

Good job guys,I don't think I would do it.

@Samil101 3 жыл бұрын

Amazing! I’ve never seen a trailer rebuilt, thanks guys now I think I’ll be able to afford one now.😂 New sub thanks!

@papatwisted6481 3 жыл бұрын

It's done very incorrectly and is unsafe....

@tamipotirala6973 2 жыл бұрын

It can be done correctly.be sure you take it to a reputable trailer shop.

@col.johnson9938 4 жыл бұрын

Wonderful job gentlemen, been looking for a place to get materials to replace the roof on my 7’ x 14’ cargo trailer. Closest Utility Parts Store is about 2 hours away. What did you pay per foot for your aluminium roof? Keep up the great videos

@myronyoder5352 5 жыл бұрын

Great video guys!

@romantheegreat208 5 жыл бұрын

Thanks man!

@AlexTheGurutv 5 жыл бұрын

what is the name of the (steel?) studs that the dry van trailer uses? I want to make a box with a pallet like bottom for forklifts to move, in the same way these trailers are made but on a smaller scale. think 8ft tall x 8ft long x 6 or 5ft wide.

@JoseLopez-fh5sh 2 жыл бұрын

Where did you guys order the frame from? For the top of the trailer ? Having a hard time finding that or sheets metal or aluminum to replace the fiberglass that torn on my trailer

@hectorarnau2634 3 жыл бұрын

Amazing!!!

@TheRustyCracker 5 жыл бұрын

Previt comrades... nice rebuild I wouldn’t dare to rebuilt a dry van lol. Maybe a low boy or step deck but not a dry van seems to hard lol.

@romantheegreat208 5 жыл бұрын

Thanks man. This one wasn’t to bad.

@bryantford3054 5 жыл бұрын

That looked like a Volvo that was pulling your trailer. Nasty wreck.

@romantheegreat208 5 жыл бұрын

Yea man! Glad the driver got out safe

@SpeedGarage 5 жыл бұрын

Nice video! Keep them coming!

@romantheegreat208 5 жыл бұрын

Thanks man!

@medellinnica 4 жыл бұрын

Nice job!!👌👏👍

@diazdiaz3794 3 жыл бұрын

Where u buy parts for reefer oh dry van, panel??

@opie773 5 жыл бұрын

I experienced deja vu watching this video. I could've sworn I saw the same clip used twice starting at the 7:23 mark and 9:53 mark. Good luck with the rest of the rebuild guys.

@5.43v 2 жыл бұрын

It is the same

@dustinrieck312 4 жыл бұрын

What did you use to replace the hucks with

@CarWars 5 жыл бұрын

That's sick! Yall got a deal seems like!

@romantheegreat208 5 жыл бұрын

Yea not bad

@wendellb36 5 жыл бұрын

Hammer for a bucking bar? I've used a dime once on a hard to get to spot on an F111

@elcamionerous3894 2 жыл бұрын

Excellent great job

@davecao908 4 жыл бұрын

Very useful video

@voltaje3992 5 жыл бұрын

Very good job guys

@romantheegreat208 5 жыл бұрын

Thank you for watching!

@TowPiglet 5 жыл бұрын

Good progress

@romantheegreat208 5 жыл бұрын

Thanks man!

@mericapowerwashing6520 4 жыл бұрын

What was the cost of the panels

@CesarHernandez-bp2ho Жыл бұрын

En qué párate de EU están trabajando, yo reparo esas cajas en México

@wendellb36 5 жыл бұрын

Who made the rivet gun looks like a recoil less

@Legoandcraftswithapril 2 жыл бұрын

What is the stuff that makes it a food grade trailer ????

@user-yc9fs8pl7p 2 жыл бұрын

Hello, do you still have a repaired dry van?

@luisescobar1348 Жыл бұрын

The top rail or bottom rail needs tobe replaced or do a 16 ft long sección and battom rail needs a backing bar to have bought pices together, backing bar need to be at list 3 crossmeber each side

@bojankljajic5408 4 жыл бұрын

Can you tell us what tools did you use for repair of this trailer? Especially want to know what kind of rivet gun is it (what air pressure it needs), is there any attachments for it ? Thank you, God bless you.

@johncalvo1743 2 жыл бұрын

@Bob f Bob, can you send me your contact info somehow? Or at least your location?

@OffroadCpl 5 жыл бұрын

Did you look at the crossmember and the 5th wheel plate. There is a reason it was total for liability reasons. Also certain things has to be done by d.o.t shop .

@romantheegreat208 5 жыл бұрын

Yes we did look at it and had someone come out look at it. There was no issue with it. Reason it was totaled because a shop would charge an arm and a leg to fix that

@OffroadCpl 5 жыл бұрын

@@romantheegreat208 good deal just don't to see it break and hurt someone going down the road

@benbenz1229 5 жыл бұрын

Nice job I do it for a living one thing is the bottom rail needs to be pass the dolly legs also a large section of steel plate to reinforce it at the bottom just some advice

@anthonyjimenez8619 5 жыл бұрын

@@benbenz1229 i said the same thing with a reinforcement plate in the back

@slowlane1267 5 жыл бұрын

worked in a semi trailer factory, careful when drilling and other person on opposite side, plenty of people have gotten drilled through their hands/arms etc, ugly injuries damaging tendons etc

@romantheegreat208 5 жыл бұрын

That sounds bad! Luckily no injuries here

@blackasia8193 3 жыл бұрын

Lol happened today

@sasankarajapaksa8549 Жыл бұрын

Hi, can you guy covert a reefer trailer into a dry van?

@juliusnfor7210 2 жыл бұрын

Nice work where did you pay the material please 🙏

@tamipotirala6973 2 жыл бұрын

Impressive

@nathanielwilliams2473 3 жыл бұрын

I wish you were in Michigan

@rvazquez4205 2 жыл бұрын

Do you know where I can get white paint to paint the trailer

@supremelogisticsinc3077 2 жыл бұрын

Call trailer manufacturer and ask for paint code. Then you can go to paint shop and they can make paint based on that code.

@saidabdulle4592 4 жыл бұрын

This American east European kids Are Smart, good job guys

@romantheegreat208 4 жыл бұрын

Thank you for the feedback and watching man!

@engineergaming4295 3 жыл бұрын

Did that trailer get jackknifed?

@gschady 3 жыл бұрын

I bet it cost 1 MILLION dollars! signed, Dr. Evil

@kevinromero4682 5 жыл бұрын

I’m about to start a hot shot business down here In Georgia. I want to try using one loadboard first. Would you prefer Truckstop or dat?

@romantheegreat208 5 жыл бұрын

Both load boards. But you had to choose only one it would be Truckstop for start

@kevinromero4682 5 жыл бұрын

What coverage do I need for insurance for full time hotshot? Like cargo and everything

@grizliexpress608 5 жыл бұрын

парни молодцы,руки из нужного места растут!прицеп себе или на продажу?

@romantheegreat208 5 жыл бұрын

We don’t know yet. Thank you for watching

@sergemiami2975 2 жыл бұрын

Классная работа парни! В каком вы штате?

@polarisbass 4 жыл бұрын

Please tell me y’all have a plate on the bottom side of the bottom rail splice? Lot of stress in that area definitely need to put 6-10’ x4” steel

@papatwisted6481 3 жыл бұрын

LMAO the splice plate is the least of the worries with the splice being in the couplerb area. That rail section should've been over the dolly legs at minimum and shouldn't EVER section both the top and bottom rail in the same area on the same side. This entire video makes me cringe from the tools used to the thought process safety wise. Sickens me to watch untrained mechanics put this crap on the road let alone a video to teach others how to do it incorrectly on you tube. I certainly hope the next person to do an FHWA/federal inspection on this unit shuts it down before someone gets killed riding beside it.

@johncalvo1743 2 жыл бұрын

@@papatwisted6481 Papa, send me your info. I could use your help.

@luisescobar1348 Жыл бұрын

And have secctions in the same area top rail and bottom rail that is a lot of stress they need to do a bathroom rail sección at list 16ft long and put a backing plate at list 3 cross members holding it

@DKUSTOMSGARAGE 5 жыл бұрын

What gun you usefor rivets and where you get rivets

@romantheegreat208 5 жыл бұрын

It was an air hammer with a tip that has a flat end. Got the rivets from the utility parts store with the rest of the parts.

@d-trucking6813 5 жыл бұрын

Auto Rebuilds Garage can you send a link from amazon or eBay link where to get a gun. Check out my channel. Have to fix a truck and trailer in a few month.

@d-trucking6813 5 жыл бұрын

Auto Rebuilds Garage thx, can I use those rivers from trailler for my cascadia cab?

@romantheegreat208 5 жыл бұрын

I’m not sure on that. I’d do some research I’m sure you can find some info on KZfaq.

@hunterbrimhall2365 5 жыл бұрын

D - Trucking use a cp714 air hammer. Its specially made to buck rivets. Not sure on what rivets you would need but I would just get some aluminum buck rivets that most truck and trailer supply place would have.

@sonofatlas1372 2 жыл бұрын

Price

@Jmoss3607 5 жыл бұрын

You guys should have turned it into reefer, dry van sucks. Great work by the way 👌👌👌

@romantheegreat208 5 жыл бұрын

Right would of been worth a lot more. Thanks for watching.

@chunoramos5370 4 жыл бұрын

I have tips and trick to make this Job way easier...13yrs exp..air hammer chisel and punch skill saw makes it easier and faster....buck rvts on bottom rail is better

@chunoramos5370 4 жыл бұрын

Hammer for a bucking bar no bueno can really hurt

@johncalvo1743 2 жыл бұрын

@@chunoramos5370 Chuno, send me your info. I could use your help.

@msfiyahfly7 2 жыл бұрын

Didn’t see the part 3?

@e_productions 2 жыл бұрын

@TIN-oq5yu 4 жыл бұрын

Парни в каком штате живёте ? У меня на драйвене крыша протекает нужен ремонт

@tonyantonov947 4 жыл бұрын

Они по моему в Вашингтон штату.

@jerryscott6924 5 жыл бұрын

Is that truck the Volvo that @therustycracker is rebuilding?

@romantheegreat208 5 жыл бұрын

No it’s not.

@jerryscott6924 5 жыл бұрын

It looked very similar.

@romantheegreat208 5 жыл бұрын

Yea definitely looks like it but no it’s a different truck

@mk007. 5 жыл бұрын

Борода смешная )

@anthonywashington2492 4 жыл бұрын

That's about a 24 hr job in our shop

@blackasia8193 3 жыл бұрын

Yeah fucking right 24 hrs

@johncalvo1743 2 жыл бұрын

Where is your shop?

@koolgamer3432 5 жыл бұрын

The truck is not ok

@sickofyou277 3 жыл бұрын

I suggest you guys go get some fine Mexican labor somewheres.

@dixiemae5042 5 жыл бұрын

🙈

@romantheegreat208 5 жыл бұрын

We need to get a hotshot trailer and rebuild that 😏

@austinhmmm9087 6 ай бұрын

People talk crap on the hobo fright tools, but i see that grinder in the beginning! Not everything needs to be snap-on. Also, is rather hear what's going on in the video than your weird voice in music. I basically watched it on mute

@koolgamer3432 5 жыл бұрын

First comment

@koolgamer3432 5 жыл бұрын

Wow first time I'm the first comment