Had a little bit of trouble getting it off the trailer but BOB helped..

If Clifford was hooked up you’d have a red truck pulling a red trailer hauling a red car

That jack sounds like the tin man giving his right hand a workout...

"See if we can get this car jacked up." That car is already jacked up.

When it comes to fixing engines and wrecks, you are the man!

Guys are getting better editing the videos. And I'm glad you went ahead and expertly catalogued the parts. Way to stay organized.

The most difficult part of this rebuild? Removing the plastic fender innerliner... :-)

Goonsquadz has a cat, this man has a cow. I dig.

I sat down to watch your video and noticed how long it was. I can’t sit on the toilet for 18 minutes. So I laid on my bed. Keep it up love your videos.

Westin is a KZfaq star! Keep the content coming broski! You guys could fix a scooter and I’ll watch

Can't wait to watch you re-build this sweet ride and see finished product

Hey man I need to give you a little heads up, that dent in the front of the rocker panel will have to be pulled. I work on these cars and own one that I repaired with the exact same dent. You won’t believe it but it will cause the door hinge to be off and the fender to be up high and shims won’t help plus just that little dent will throw the whole strut tower off. I promise you need to at least have it looked at. Ours was wrecked and torn up exactly that way but don’t throw that black 5.0 emblem away there hard to find black💯😱😱💯

Bob did a great job getting the Mustang off the trailer! Looking forward to seeing you get this Mustang back on the road!

Mustang gonna look sick when its fully restored

Some guys have a pet dog or cat, not this guy, he’s got a freaking bull!

I think a full set of those Chrome Town Car wheels would really set that Mustang apart lol Congrats on getting it off the trailer - look forward to watching the build

I like it. Can’t wait too see it done man.

Hey Western. Came across your channel a few weeks back and can't stop watching. I love it. I think your sense of humor without the use of vulgarity is a breath of fresh air. P.S. Beyonce is mine.

Yup. No more spare tires. Air pumps and run flat tires

love your videos, they are supper entertaining and i actually learn a few things to boot! thank you for sharing!

Thanks for sharing your new adventure with us. 👍😁

Don't forget that thing control arm mounting tabs might be bent too

Love that coyote sound

I just discovered this guys channel and have watched like 5 hours of content today

That jack makes a pretty fire beat

I think I felt the earth move when Wes was jumping. Lol.

I am jealous of this man's skills.

Pretty sure my dog thought the world was ending when you started with the jack.

Thanks for the Video..... I am so happy for you finally getting the car off the trailer and into the shop. Remember that part that the Strut is attached to is important...(see what I said in the first video). Remember I have shotgun on the first ride.

You should give us a tour of your parts vehicles. Give us a look around your yard and buildings.

I love your videos . But I want to know your back story .

Enjoying the content, even if it isn’t a diesel.

Cant wait till this thang is done

Was your Jack sending a mating call to other jacks

I cracked so hard when he was driving away with the lawnmower lol

Hey bud make sure ya keep the 5,0 emblem off the fender .they can get expensive sometimes but cant wait to see the outcome on the 5,0 it sounds sweet so loads of luck on it and godbless

Well now that the Fummins is done I guess the 'Mushtang' is next to get some love.

Keep em coming

Ahh the tire looks fine it’s part of them new arrow dynamic kits

Glad I found this channel your just like us boys out here keep on doin your thing man

Awesome Westen, can't wait to see what you do with the 'stang. You need to do a Ram 3500 for me to pull a 5th wheel with!

Just letting you know, all newer mustangs don’t come with a spare lol, normally it’s with a fixaflat substance and a air compressor to make it to your closest dealer lol.

These videos crack me up. Love the Kubota!

Monday night upload. Awesome! 👍

Your channel got huge in just a few months so impressive

That jack sounded like two Pterodactyls getting frisky in the bed of a sacked out pickup

You should really do a junkyard tour vid.

I enjoy your humor. Great content

LIKED & SUBSCRIBED!! Looking Forward to Seeing More!! Thank You BOB The Builder, and The Grandpa Wheel Actually Looks Good On It!!

It probably would have been easier to use Bob to lift the front of the trailer to make the angle less severe over that janky metal bar.

Just cuz your brother like to hold the camera, next time you be the camera man he he works on the car 🤣

Can't wait to see how it going to turn out. Great content 👍

Bob deserves a gift, like some tires to replace the rubber bands currently on him.

Absolutely love your videos I’m glad i found your channel

I look forward to your videos. Keep em up man

Same thing in my Caravan NO spare just a cheap compressor with a fix a flat option.

Big man with his a/c unit

cool video i work at the Flat Rock Michigan mustang assembly plant (FRAP) and I install the black plate behind the breaks and wheel shown at 8:10 Good luck trying to unscrew those 6 bolts the torque gun is insanely tight

Great videos man! Y'all keep it up! Looking forward to seeing the stang fixed up.

Jack squallin' like a whipped puppy!

"Don't you get mad at me, I'll mow your ass" hahaha I freaking lost it!

This video should be called we struggled for far too long to get this '17 mustang off our trailer.

Did i hear an ENGINE KNOCK when you were pulling it in the shop?????

Awesome ! New upload 😬👍🏻

awesome ...we are rebuilding a mustang GT for our new channel

Keep it going brother, enjoy your videos from Tx

I enjoy hearing the camera man chime in every once and awhile

Can’t wait to see what you do to this

OMG that tire is crazy

Vanilla looked like he wanted you to throw a ball for him ( that's how my dog carries on ) 🎾

“I’ll be shirtless in about a min” “I’m sure we’d all like to see that” 😂😂😂

That left front tire is missing a spoke on the wheel

God damn that mower is fast.

Ya know your camera man is pushing it when he can be replaced by a tripod

Hot metal parts. Yep. It's 99 degrees in Los Angeles.

Future tip if you don’t have the key to the security but you can hammer a socket over it and take it off that way.

All you have to do is hanmner on a slightly smaller socket and that will take off the lug nut

You have a lot of work to do on the old girl. Good luck I’ll be watching each and everyone of each video.

A friend of mine once said to keep backing up until it sounds expense.

Hey westen If you haven't already get a milwalkee 1/2 impact my dad and me recently bought one and its a beast.

Find a socket a size smaller than the locking lug, pounded on the locking lug then back for like a half. Easy squeezy lemon easy

What happened to Clifford we dont see it anymore

I love watching rebuild videos just wish I had the knowledge on how to fix one up

Love these videos! Raise the front of the trailer & extend the ramps

everything in this channel seen better days..

Keep the 5.0 fender badge its really expensive!

When he hit his knee I about fell out of my chair laughing. I have done that so many times. Ps keep the bad language and jokes!

I'm tellin ya, strip the body down, throw some parts from the front end of a couple f-150s to lift everything a couple inches, cage it and make the most badass buggy ever!!!

Who’s music are you using? I’ve heard that in a couple of your videos, I like it, who is it?

That thing will be fun for sure. Just don't drive it near any big crowds. Some things have be known to happen involving big crowds and mustangs....

Never clicked on a video so fast

Love the car! Still need a hat!

My main man Westen!!

Nice job mate

Holy hell! When you started jacking the car up you scared the hell out of my cat! He hid in the basement for an hour! LMFAO! He’s fine now🐈

Track pack mustang's have brembo brakes and the minimum size rim you can fit is a 19 inch

Once I graduate and get a job I plan on buying, fixing, and selling cars as a side hobby.

Westen: -"Wheel ...lock...key...tool, ok cool" (sounded like he had to translate it from German or something reading it...) 😉👍

Well done 👍🏻

Anyone else notice how fast that lawnmower goes