Rebuilding a Wrecked Jeep Cherokee SRT Part 3.

No video

Rebuilding a Wrecked Jeep Cherokee SRT Part 3.

Рет қаралды 20,880

Күн бұрын

Is replacing a frame rail on a Jeep Cherokee difficult? No it’s not but it is time consuming that’s for sure. We are on part three of rebuilding the SRT and we have made some very good progress, in todays video we get the frame rail mounted and tacked in ready for finally welding. In this video you will see the time and effort that it takes to do this job and see that it’s not that hard as long as you are willing to learn and to work hard. Everything comes apart in sections and can be assembled again in the same way, all you have to do is line up all the exiting spot welds and paint lines and you are good to go.

Пікірлер: 116

@FlyEaglesFly19111 4 ай бұрын

Cat and the Goat.. hot damn its becoming a farm down there..😂😅😂😅. Great job Yuri.. stay safe and be well. God bless

@23RD 4 ай бұрын

The way I been eating lately I qualify more as a hog 😅

@derekaldrich4887 4 ай бұрын

@@23RDI comment on this video on KZfaq

@markos916 4 ай бұрын

So I appreciate you taking on some of these basket cases. The viewer really learns so much more than when it's just slight damage. I know it's a lot of work. So again thank you!

@johnhouseholder7682 4 ай бұрын

Can’t wait for this one to be finished.thanks John from Arizona

@23RD 4 ай бұрын

Me too 😆

@pmiller7886 4 ай бұрын

Just a shout out to you and your brothers Yuri, an older gentleman decided to turn right into the front wheel of my 20' f350 super duty and did $20,000.00 + of damage to it. Due to your detailed videos I was able to effectively talk with the bump shop owner and let him know what I wanted and more importantly didn't want done to my truck. It's an alumiduty and he wanted to body fill and goof around with the bed side that was crunched up. It's an 8' bed, so I located a complete white bed that was a takeoff for only a $1000.00 , no filler for me thank you very much. So, I appreciate you man for real.

@MazichMusic 4 ай бұрын

Sounds like you need a new body shop, sir.

@23RD 4 ай бұрын

Glad we could help, I get a lot of these types of comments and it makes all the extra yapping worth it.

@imfloridano5448 4 ай бұрын

Same happened were a lady exiting the highway shot across lanes without checking her clearance between me and her and she rear side swiped my left rear bed. Broke the bumper which I've never seen before. I've been watching 23rd Garage for years, and remember everything Yuri pointed out to watch for in repairs. Thank you Yuri and family

@philtucker1224 4 ай бұрын

Hi Buddy you said 20k damage then 1 k damage so why two different prices my friend? (Confused)…

@pmiller7886 4 ай бұрын

@philtucker1224 a replacement bed in perfect shape I found was $1000. Same color, stickers on, etc. It was a take off when they converted trucks like mine to service bodies. The shop didn't want to give me a new bed, they wanted to fix mine and make maximum profit. I said no chance pal. The bedside damage was only part of the overall damage.

@reglockhart8417 4 ай бұрын

Good morning and great to see cat back 😊

@John-ky9nz 4 ай бұрын

Catillac kitty is always a great part of the video

@peterhancox5268 4 ай бұрын

52k subs, you deserve 250k subs, great entertaining work, keep it up

@vindejon7097 4 ай бұрын

Cat the weld inspector hehe Great to see this rebuild coming together. Big Up!

@temourarghawan9546 4 ай бұрын

You are a hard worker and you know what you are doing. Keep it up brother. God Bless you

@JRs-Garage 4 ай бұрын

Nice work Yuri ! You really do put blood sweat and tears into your jobs 😂😳 Nice job lining that rail up though!

@ferraritech 4 ай бұрын

The best channel on KZfaq!

@HowtoRestoreHeadlights 4 ай бұрын

Sheesh! The extra full on road trip!!! Not just the extra mile! Also, should name the car Wilson. Like in Cast away. Since he likes to roll out in the FedEx trucks.

@Zekrom868 4 ай бұрын

Amazing skills and great work. Love the content keep it coming if and when you can. I love watching everything you work on. Keep up the great work.

@imfloridano5448 4 ай бұрын

The music played perfectly when you were moving at warp speed 🤣😂😂 and a new type of welder is on the market developed by the cat

@user-di4kv9yk3g 4 ай бұрын

super productive day my friend, done well there great to see such a complex job done so professionally Yuri's smashing it baby

@stex1985 4 ай бұрын

Cat loves his papa. 😁

@stevesnvegas9040 4 ай бұрын

Those are some crazy skills you have Yuri!

@AnthonyVeith 4 ай бұрын

That was a tough one Yuri but you smashed it out like always , lovin the frame work and learning a lot about modern cars , I like my classics as they are so much easier to work on compared to today’s . I still have those beers waiting 😊👍👍peace

@wookiewookster1214 4 ай бұрын

Another excellent video Yuri, thanks for banging out the quality content.

@Xpyburnt_ndz 4 ай бұрын

Yuri the magician!!! Looks gr8 bud!!!

@ausmartin1 4 ай бұрын

I was just thinking 🤔 what an impressive structural disassembly & getting cut. Then you didn't escape it. Bound to happen with that much work ! Well done 👏

@jamesbergeron8356 4 ай бұрын

Nice work, a huge job. You're killing it Yuri.

@alcasey3551 4 ай бұрын

Yuri, there's no doubt that you're one of the hardest working body guys with humour to top it off. You make it look easy while it's hard work. Drilling that many holes and in high streangth steel and the vibration from cutting is hard on the body. You don't get enough prise. Respect👍👍👏👏

@bernardowens1648 4 ай бұрын

CAT!!!!!! Great to see you!!! Lol

@timohalloran3159 4 ай бұрын

That's hard ass work!!! Keep up the great work.

@808SSCamaro 4 ай бұрын

Insane amount of work! You are very good in all your frame work!

@dwight8426 4 ай бұрын

You and your brothers all do excellent work l enjoy all your videos. Thanks

@adrianowen6524 4 ай бұрын

👍👍👍

@wilfredocaban3542 4 ай бұрын

Katt is a good supervisor.

@raynavarra 4 ай бұрын

Outstanding job. Gun build to watch.

@imfloridano5448 4 ай бұрын

Yuri besides my kids bringing joy to my birthday today you gave me a great present of another excellent upload. When climbing up or down(worm food)😂🤣 these videos help keep the mind in exercise. Thank you Yuri and family for being their for the KZfaq viewing community. 🤜🏾🤛🏾👍🏾👍🏾👍🏾

@23RD 4 ай бұрын

Happy Birthday hope you have a good one 🤙

@dickdegraaff5452 4 ай бұрын

Dear Yuriv, The repair of the wrecked Jeep Cherokee SRT seems to be very easy by watching your vlog but I know how difficult it is to get such a frame rail lined up 100% so it’s very clever of yours that you succeed with this. I look forward to your next vlog and send you love from the Netherlands

@_Merica_USA 4 ай бұрын

Another Great Video 👍 Great content, keep up the great work!

@JustCrew 4 ай бұрын

I noticed Cat went for his catnap when you were doing all the drilling and pounding. Smart cat.

@23RD 4 ай бұрын

Cat disappears as soon as the noises start 😆

@Ham-Radio-3945 4 ай бұрын

I love the way you speed up the videos when working on substantial moments of labor. You truly know how to entertain your viewers. Great Job sir!...

@louisebrown2887 4 ай бұрын

Yuri you do excellent work been with you from almost the beginning

@DonnieWon 4 ай бұрын

yo yuri - dont give up on the content bro. most entertaining car channel and you gonna blow up even more

@BuzzTec 4 ай бұрын

Awesome job Yuri 👏🏼

@MannyNPD 4 ай бұрын

I hope you clean that cut out so I don’t get infected my dude

@glennarnold3970 4 ай бұрын

Yuri a little tip from one panel beater to another when welding inside the car do your usual safety process but get a plastic takeout container drill a hole in it big enough to fit your mig torch in it then hold the container over where you are going to weld put the mig torch in the hole and then you can plug weld the container will capture all the sparks and splatter and less chance of burning interior and splatter on the glass then repeat for all the plug welds cheers from down under

@user-lw7mw1cj5k 4 ай бұрын

Lots of hard tedious and detailed work. That's why cars get totaled. The time costs more when the insured is using a rental car waiting for their car to get completed. You are doing an excellent job putting this car back on the road. It involves lots of work but you have proven that you are a hard worker. Both Cat and Paul have been stopping by doing inspections but it looks like you've got this one yourself. It is fun to see your progress on this one. Thanks for the great videos.

@richarcruz7843 4 ай бұрын

Great work Yuri 💪🏽💪🏽💪🏽💪🏽

@bobmanzi7712 4 ай бұрын

great stuff dude thanks

@stoveguy2133 4 ай бұрын

Crazy jigsaw puzzle. Lots of pieces.

@richardfarmer6570 4 ай бұрын

Nicely done, that was a lot of welds and I am sure it was tedious as hell.

@normangallant9879 4 ай бұрын

Lots of work.Good luck on this job

@jonathanluce9130 4 ай бұрын

QC cat is back, he was impressed with how many holes you had to drill out on this one!

@marc5460 4 ай бұрын

tnx for the video

@laptopuser3323 4 ай бұрын

Gday guys

@rocksy71 4 ай бұрын

Yuri Bangitoff is your new name, if your video was to show just how much work goes into replacing used parts on a crash, damage car than you succeeded, you can see why the price would be so hard to replace all new OEM versus reclaimed parts, but the work that’s involved, there’s not any less using reclaim parts versus OEM

@23RD 4 ай бұрын

Haha thanks man I love the nickname, you know what’s crazy I cut over two hours of footage so what you are seeing is like 10 percent of everything 😅

@rocksy71 4 ай бұрын

I’ve got to say Yuri I know that you know the goon squad guys, but let’s be honest you and your brother Ben are the real deal, thanks for the reply all the years I’ve been watching KZfaq channels you’re the only creator to have ever message back with your response. Thank you for taking the time much appreciate your content and obviously everything that goes into the creation of the videos. On top of the time it takes to film it. I can only imagine how much work you must put in to each video you publish. On the other hand, your British accent cracks me up each time you use it keep on doing what you’re doing and I’m sure your fans will appreciate everything you do. John, UK

@aaronbillbradley7343 4 ай бұрын

That metal bit you good. Still didn’t’ t slow you down, great job of pushing through it! Keep up your work effort, the rewards will make it to you.

@michaeldilorenzo8464 4 ай бұрын

I love and enjoy your channel! It's one of the best on KZfaq. You really know what you are doing and do it professionally.

@23RD 4 ай бұрын

Thank you so much! It means a lot to us that you guys are so supportive 🤙

@chrisbriggs6721 4 ай бұрын

Top man excellent content as always look forward too your next chapter

@ahsank3277 4 ай бұрын

Man! that is a lot of work to put this project back on the road. Shout out to you guys for all this hard work. Although, need more of the cat QC skills on the project!

@MrHuismeester 4 ай бұрын

Nice video Yuri, and glad to see cat again ! Maybe time consuming, but when everything is done and it is fitting like a glove you can be proud of yourself ! Nice piece of work and now wait for the frame job !!

@julianjobe9836 4 ай бұрын

As always I love the content.❤💪🏽💯

@chrisplace3024 4 ай бұрын

Great show. Thanks

@juliocaverna4278 4 ай бұрын

Boa tarde yuri, tem q uzar material de proteção nessas horas.

@bryduhbikeguy 4 ай бұрын

"The Wizard of Warped Steel" strikes again.

@RandySmith-iz1ml 4 ай бұрын

Tedious work, great job!

@joesammut3773 4 ай бұрын

just for thought , when working on sharp metal oject, were long sleeve t-shirts. you will still get cut but maybe not as bad. and make sure your first aide box is not five years old . i hate it when something happens and the band aids do not stick. and make sure you have butterfly band aids . they are great for line cuts . To me I can move around more with a t-shirt then a work shirt. sleevless jackets with a long sleeve t shirt on a cold day.

@angelmorales220 4 ай бұрын

Amazing job

@The300ZXGuru 4 ай бұрын

hey Jag!!!!!

@tomswindler64 4 ай бұрын

Great video as always, you accomplished quite a bit on this video,great job.just keep doing what you do and carry on 😎😎😎👍👍👍

@DonavonWolfeStJames 4 ай бұрын

You should call the cat "Paws monitor". Just like hall monitor. For your shop. Donavon.

@jimmyhudzgarage 4 ай бұрын

I love you brother.❤❤❤

@MikeAbbott3 4 ай бұрын

Name the cat Ford Lincoln Mercury after the kid in the movie The Postman.

@ronm7489 4 ай бұрын

Had a black cat that liked to sit on our shoulders and she never outgrew it.

@tractorman6470 4 ай бұрын

Yuri you are amazing

@derekaldrich4887 4 ай бұрын

How are you today yuri I like watching your videos on KZfaq I support you and subscribe to your channel

@Homemade1970 4 ай бұрын

My guy yuri I think doing all that work would give me PTSD 😂

@edde9449 4 ай бұрын

Blood, toil, tears and sweat ~~ WC

@johnDingoFoxVelocity 4 ай бұрын

Remember jeeps are built like a brick outhouse they take a long dang time to rebuild

@Private011 4 ай бұрын

Dang. You might need some stitches on that son.

@jimmyhudzgarage 4 ай бұрын

I love you my boy

@ericthered976 4 ай бұрын

So I am curious. Is this a customer's car or is this one that you bought that was totaled out by insurance and you are fixing it to flip? With the amount of labor you put in on this, I can't imagine it would be worth it to pay you guys to do all the work vs replacing the vehicle. So are the majority of these vids for customers cars or cars ya'll are rebuilding to sell? Thanks

@trent63 4 ай бұрын

You just gonna skip over the fact that we all saw you lift that car by yourself? Somebody get some Kryptonite and put near him. LOL

@thomasbossman 4 ай бұрын

Y'all whipping that SRT already??

@sttm1283 4 ай бұрын

can someone explain if i got this straight. when drilling through, you are not gonna use the panel/piece underneath? when just drilling out the weld/rivets you are gonna use the part thats underneath?

@23RD 4 ай бұрын

Yes that is correct but it’s not always possible, sometimes even if you are using the panel you have to go all the way through to make the disassembly easier. Drilling all the way through is harder to weld back up but it provides a stronger weld because you are penetrating all the way through to the other side. If you have areas that could catch on fire behind, I recommend using a belt sander to remove damaged sections. This will keep your slag from blowing through.

@tube8533 3 ай бұрын

y can do it!

@jimmyhudzgarage 4 ай бұрын

You are beautiful мой брат'

@basscomander6348 4 ай бұрын

Comment

@bryduhbikeguy 4 ай бұрын

Meow...

@basscomander6348 4 ай бұрын

@@bryduhbikeguy tell your cat I said pssstpsssspsssst

@1stBlade 4 ай бұрын

Still no time for bleeding? ;)

@KENNEY1023 4 ай бұрын

That cut looks bad. You need to go get it looked and maybe a tetnaus shot.

@donswitzer1799 4 ай бұрын

What happened to vtune is he okay

@jimmyhudzgarage 4 ай бұрын

Я люблю Ури

@popeyetse7110 4 ай бұрын

👏👍💪🚙🤩❤️🐈‍⬛

@ychunks3710 4 ай бұрын

Oh man that's a nasty cut on ur arm, hope u had ur tetanus shot and properly bandaged and covered the cut

@rmorris3722 4 ай бұрын

Meow

@user-ot1hn1yb6y 4 ай бұрын

2:31 if your cut by aluminum do you need a tetanus shot...when the last time you got a tetanus shot ...you mite check on that seriously ...every 7-10 years according to a quick google search