Recoil starter spring winding and install

No video

Recoil starter spring winding and install

Рет қаралды 493,438

Күн бұрын

Watch this video and then decide if its in your comfort level to attempt. If I can do it, you can do it BUT it did NOT go this smoothly the first time I ever tried it. Now its not a big deal. Good luck guys and gals! Comments always welcome.

Пікірлер: 179

@NeinFeline 2 ай бұрын

Used it today! Needed the part about where the internal spring notch catches on the notch oart of the housing assembly... Then learned I can't turn more than 7 times without it popping off... Got everything assembled with the pull cord replaced with diamond cord kit and VOILA! Started right up! Bless You Brother 🙏👍

@ZombieDaveAZ 2 ай бұрын

@@NeinFeline so glad it worked out for you. Happy mowing🥴

@oatnoid Жыл бұрын

Easier way. Start by hooking the spring to the housing where it's going to end up. Then wind the spring backwards. The housing holds it in place so you can use both hands.

@ZombieDaveAZ Жыл бұрын

I have seen that way and used it myself. Curious as to why when you buy a replacement it comes coiled?

@kerzy11 5 жыл бұрын

Best diy video I’ve ever used on here bar none! Saved me a huge headache. Real time and real talk. Awesome stuff!

@dudeski3337 2 жыл бұрын

This is what KZfaq is for👍👍 thank you so much.

@RobHealey 2 жыл бұрын

Extremely useful video , thank you. Seeing the inner end of the spring being bent showed me that my spring had bent when it came loose. I re-bent it and jiggled it like you did and it went home. Also the way the ratchets work helped because I'd put the top cap on 90 degree wrong and the ratchets didn't come out. Thanks heaps !

@astnbomb 4 жыл бұрын

Thanks for this video. Found myself in the exact scenario you described with the spring on the floor, swearing at myself! Was able to wind up perfectly with the two nails.

@jacqueayars603 3 жыл бұрын

Thanks so much! I watched so many different video’s and after watching your video I succeeded successfully!!

@ZombieDaveAZ 3 жыл бұрын

Hopefully no blood. 👍🍺😷

@1whamster 4 жыл бұрын

Thank you so much, I accidentally let the spring loose when replacing the pull cord, if I hadn’t managed to fix that spring I would never have been able to watch master mechanics Ed China on Wheeler Dealers or Fuzz Townsend in Car SOS again, I’d have felt such a loser, but you saved my pride and my pocket, god bless you sir, and I got suntan in my back yard 😎

@ZombieDaveAZ 4 жыл бұрын

You are welcome brother

@michaeldodson5117 5 жыл бұрын

Great video, easy to understand and no excessive talking. Also he explains things very well so that I'm right on track not rewinding over and over. I like how he said "if this pops off I'm still gonna post it cuz that's real life." That is very true, smart man 👍 hope you keep it up, KZfaqr's could take a good lesson on how to make a informative videos the right way.

@charleyeisen4310 Жыл бұрын

Hi Anal

@ericjones6248 4 жыл бұрын

Thank you Dave . i had been fussin with it for an hour . watched your video as a was doing it. Nice and simple right to the point .

@ZombieDaveAZ 4 жыл бұрын

Thank you E-Man. Stay safe out there 😷👍🍺

@hollysummers3184 4 жыл бұрын

I am a woman and watched this video and just fixed my lawn mower and I did have to pause and look at mine and this was the best video as he showed and explained and he deserved a pant on his back for a excellent tutorial demonstration of recoil starter spring .Thank you

@ZombieDaveAZ 4 жыл бұрын

Thank you Holly

@mysteryman5213 4 жыл бұрын

Thanks for this demo. In my opinion, it was by far the best option I found here on the tube of you. Mission accomplished in the first attempt. Thanks again.

@ZombieDaveAZ 4 жыл бұрын

Thanks Mystery Man

@chaz6399 6 ай бұрын

I was able to get my spring wound with a few modification to your process. The main problem was I kept ending up with the center hole being too small to fit over the round protrusion in the center of the spring well. The modification was to place a stack of three quarters in the center of the spring and then wind around that. I suppose any strong disk of about that size would have worked but a stack of coins is what I thought of first. Also, wrapping around the stack of quarters seemed to make the wrap more stable. Of course this could have been me getting better at it with each try. The other modification was simply to cut the heads off the nails, to make it easier to lift the coiled spring up away from the nails without the spring catching the heads. Anyway, thanks for the video!

@triciamcintyre4947 4 жыл бұрын

Went to change the starter rope and nearly got decapitated with the spring, going to try and wind the spring back up tomorrow,nice video 👍💯

@ZombieDaveAZ 4 жыл бұрын

Good luck Tricia.

@monstersofthemidway7125 3 жыл бұрын

Having rebuilt several starter recoils over the past 50 years I would strongly suggest you wear safety glasses. That spring could pop out of the housing with a lot of force and .....

@ZombieDaveAZ 2 жыл бұрын

I wear glasses just to see cuz I'm old. You are correct tho and thanks.

@Specificityful 4 жыл бұрын

THANK YOU! I had planned to mow today and my pull broke early on. Then I dropped the assembly while taking it apart and BOING! I had no idea how to put the spring back in. Your video and 3 attempts later, I was back in the game. Good work.

@ZombieDaveAZ 4 жыл бұрын

You gotta love those little " MAN " victories. Happy to help, but You did the work so YOU get the credit. Congrats my friend, stay safe and healthy. 👍😷🍻

@chrisschlachter5308 3 жыл бұрын

Great video. I copied your technic and it worked very well on my second attempt. I don't even have exactly the same housing. THANKS

@ZombieDaveAZ 3 жыл бұрын

Thanks Chris. I'm happy you found it useful and double thanks for coming back to my channel to comment. 👍

@worldbeatxxx 3 жыл бұрын

Thanks for the tips.. like so many folks who show you how to do stuff they take forever to get to the point Skip to 3 minutes.

@ZombieDaveAZ 3 жыл бұрын

The complimentary diss. I like it. 😂👍🍺

@worldbeatxxx 3 жыл бұрын

@@ZombieDaveAZ Ha.. well hey, folks upload helpful stuff, so I mean no unkindness to well-meaning fixit guys they are great, but hoping that do-it-yourself videographers will get to the point.. sometimes it's painful. We don't need to know that your wife told you to buy a new one and you decided you can fix the thingamajig and you made a bet with your brother-inlaw you could fix it, but it was thanksgiving and you could not do it that day because the family was over, and your daughter was having your first grandchild 7 pounds .. all are healthy but that's not how the pregnancy started 8 months ago when she told you. You were concerned because her husband is a loser. But he retired from the service.. "Thank you for your service non-the-less." Anyhoo 10 minutes later.. here is how you change a light bulb. -- I'm here all night, try the veal. :)

@ZombieDaveAZ 3 жыл бұрын

I would pay you money to put that response on all my videos. That's awesome! Ps, how's the grand daughter? . . .... Too soon?

@williamorr9942 5 жыл бұрын

Just a quick moment to says thanks for taking the time to make the video. Most helpful. Having a cold one in your honor ..!..

@xJusticeGaming 4 жыл бұрын

Thank you so much for taking the time to show me this! best and most helpful video I have watched.

@ZombieDaveAZ 4 жыл бұрын

Happy to help. Stay safe.

@happy11111100 4 жыл бұрын

Thank you from South Wales UK i fixed the spring and the pull cord

@ZombieDaveAZ 4 жыл бұрын

You just made my day! Thanks for taking the time to comment. 👍🍻😷

@peterandersen4590 4 жыл бұрын

Totally solved my problem! Thanks for sharing this. I was close to a solution, but needed exactly this to solve it 100%. So pleased people like you share videos like this to fix everyday stuff instead of spending money on buying new stuff. I have a different model mower but basics are the same. Stay safe and healthy everyone during the Covid-19 nightmare, and thanks once again from Denmark, Europe

@ZombieDaveAZ 4 жыл бұрын

Thank you Peter. Stay safe my friend. We will get through this. I hope you subscribe. New video coming out today on a backpack blower. Fun stuff. 👍

@brucecggallagher1949 5 жыл бұрын

thank you...i had the same housing etc. and didn't even realize that it was the spring that was the issue aside from the broken rope....your video was great and I just subscribed. Cheers from British Columbia

@ZombieDaveAZ 5 жыл бұрын

Thank you Bruce.

@daviddanh1772 2 жыл бұрын

Thanks for the video!! Great information .ive been searching for the reason i wasnt getting any tension or recoil.. and i just felt really stupid as you explained it and showed me how easy it is.. lol

@Alpha-ro8sc Жыл бұрын

Thank you Sir! Your video was exactly what I needed.

@ZombieDaveAZ Жыл бұрын

Happy to help. If you need anything specific just ask. Always looking for new things to video. Thanks for taking the time to comment.

@mrfixitusa6165 4 жыл бұрын

".....hopefully there's no blood." 😝😂🤣😂🤣 I know the feeling bro,I know the feeling!

@ZombieDaveAZ 4 жыл бұрын

When you are making videos you are just kinda talking what you are thinking out loud. I crack myself up sometimes. Glad you got a chuckle.

@mrfixitusa6165 4 жыл бұрын

@@ZombieDaveAZ I've made a couple for my beehive production side business/hobby and yeah, sometimes I hear something I just said or did, get to chuckling and realize "this guy is a nut! Oh wait, it's me, ok yeah I'm bonkers." So I can understand that part!😝🤣 But you're way better at making videos than I am, so yours are actually funny AND informative! For each of the few Ive made, there's far more bloopers, screw ups, retakes, re-starts, re-stops, do-overs and "aww dang that was dumb, ok forget this video" moments, than there ever is of usable video, so I don't make very many.😂🤣😂🤣 I guess it "might" help if I'd learn how to do some video editing but all I know is how to shorten it be cutting off some of the beginning or ending. 🙈

@philliphall5198 Жыл бұрын

Good job but I would make a hole in side of the wheel so I could wrap the rope to make it work better and no slack in rope

@ZombieDaveAZ Жыл бұрын

You are so right! I have a video on that too somewhere on KZfaq. Thanks for checking in Phil.👍

@JohnBruno-yi1ex 15 күн бұрын

Looks really fun

@TheBigmachineman 5 жыл бұрын

Great info and easy to understand. Thanks for sharing.

@JoseAndrade-xp6dj 4 жыл бұрын

Thanks for the information it was very helpful I did it different ways until I got done good teaching.

@user-dk8oe8cd2u Ай бұрын

Great video TY

@ZombieDaveAZ Ай бұрын

@@user-dk8oe8cd2u thank you. 😁🍺👍

@rukshun 7 жыл бұрын

Nice video. It helped me a lot. I ended up doing a slight variation of this method and was able to rewind the old spring that had popped out. I ended up hooking the outer bend to the notch on the wheel, then took a needle nose vise grip and just wound the inner hook. until it was tight and small to drop in the hole. The only drawback was the inner hook was not as level with the rest of the spring and I had to force down to make it not stick out Your method would eliminate what I encountered.

@ZombieDaveAZ 7 жыл бұрын

rukshun Thanks for the comment. Sometimes I do like you described but look at this spring before I start winding it. Its in a big S shape and a little more difficult. The important thing is you went for it and got the victory! My first attemp 20 starters ago did not go this smooth. Truth! Take care and Thanks for watching.👍

@ZombieDaveAZ 5 жыл бұрын

I like it when guys go with sonething when they think "outside the box". Good job buddy!

@danhartman9087 3 жыл бұрын

Ahh yes - an official unit of measurement, "the squidge"! I can't count how many squidges I have in my garage. Yep - "squidges" and "real life". How true, how true! I would SUBSCRIBE, but I already had. Great job!

@ZombieDaveAZ 3 жыл бұрын

Lol, Dan. I've been called out on that before. Stay safe my friend. 👍😷🍺

@harleyssaloonllcbrunner1589 5 жыл бұрын

This was by far the best and most helpful in pulling this off thank you

@paul4862 4 жыл бұрын

Your a life saver mate thanks very much.

@ZombieDaveAZ 4 жыл бұрын

Thank you Paul. Appreciate it very much.

@harveymurphy9527 5 жыл бұрын

Thank you for the video, going try it in a bit, only addition I would suggest is wearing safety googles. Those spring do fly around.

@ZombieDaveAZ 5 жыл бұрын

They get caught up. I tried with no success. I have another way to do this. Ill post the link in a minute.

@ZombieDaveAZ 5 жыл бұрын

Watch this one too Harv. Thanks kzfaq.info/get/bejne/mdGRmpCVz5uwg2g.html

@ThoughtWave64 5 жыл бұрын

Glad I watched your version of this fix. I already did a recoil of the spring, and everything seemed right except the little catch pegs wouldn't pop out. I knew something wasn't right...and I suspected I was missing a "small part"...yep...the center spring is nowhere to be seen. I'll get out the magnet rake and sweep the area I was working on it.

@ZombieDaveAZ 5 жыл бұрын

Its okay brother. I get humbled alot! Now we are both smarter for the mistake. Employers call that "experience". Thanks for commenting and I hope you subscribe.

@epickillers1030 Жыл бұрын

Perfect replacement

@menacingduke2415 3 жыл бұрын

I just subscribed. Thank you. I needed to know this information because i want to make a gunslinger from tf2, and the gunslinger has a pull cord on it. (Remember to hold the spring) Thank you again for your help.

@ZombieDaveAZ 3 жыл бұрын

Thanks Duke. Happy to help. Stay safe👍😷🍺

@menacingduke2415 3 жыл бұрын

@@ZombieDaveAZ of course

@norbertrivera 4 жыл бұрын

.....At last a hero in youtube,thanks sir.

@ZombieDaveAZ 4 жыл бұрын

Gracias por el comentario. Es muy amable de su parte. 👍

@norbertrivera 4 жыл бұрын

@@ZombieDaveAZ ...Habla español....!!

@ZombieDaveAZ 4 жыл бұрын

@@norbertrivera I also can use the translator for spelling. Happy Thankgiving to you my friend.

@norbertrivera 4 жыл бұрын

@@ZombieDaveAZ Thanks,Happy thanksgiving to you too.

@BP-gu2ws 3 жыл бұрын

Very helpful. Please say anyway instead of anyways. It’s like saying underwear or underwears

@ZombieDaveAZ 3 жыл бұрын

Really Brian?Anyway is a common adverb used to mean “in any case,” while any way is an adjective-noun phrase that means “whichever path” or “in any manner.” Anyways is the informal form of anyway. Consider me informal. 😷🍺👍

@JohnBruno-yi1ex 15 күн бұрын

Exactly why i didnt want to take that part apart. I have very little patients

@Ghhonhg3245 4 жыл бұрын

Nice video,thanks so much.I’v just repair it

@ZombieDaveAZ 4 жыл бұрын

You are very welcome my friend. 👍😷🍺

@martyahad6391 4 ай бұрын

A safer and easier way would be to buy a Pulley and Spring Assembly, Briggs & Stratton, part #498144, Amazon US $17.15 (Apr 2024). Remove the old pulley & spring assembly, drop the new one in place, rewind it counter clockwise 7 times, line up the rope entrance way on the plastic pulley with the hole on the steel shroud, insert a screw driver to hold it in place, tie a knot on a new rope and insert it through the plastic pulley and out through the steel shroud, hold the rope and remove the screwdriver an slowly let the pulley turn clockwise until it comes to a stop. I have 2008 Toro lawn mower.

@ZombieDaveAZ 4 ай бұрын

Wait!?,What!? You mean I coulda......

@hank6887 4 жыл бұрын

Thanks helped me alot , much appreciated

@ZombieDaveAZ 4 жыл бұрын

Thanks Hank. Stay safe.

@sonrouge 4 жыл бұрын

Enraged didn't even begin to describe how I felt when that damn thing uncoiled free just when I was putting the damn thing back together. Spent a good bit of time yelling at it and trying to wind it back up with my fingers. Thanks for showing an easier way to do it.

@2driftlong 2 жыл бұрын

I was replacing my cord today and I accidentally pulled the spring apart. I then used brute force and managed to tighten the spring, it took several attempts, my left hand was so sore and about to give up but I persisted, and it worked. Just putting it out there, that it is possible to do it without tools.

@ZombieDaveAZ 2 жыл бұрын

Where there's a will, there's a way. Good job. 👍🍻

@ZombieDaveAZ 2 жыл бұрын

I'm also curious as hell to know what the voices in your head were telling you about 3/4 of the way through. I'm not gonna lie, it was nerve wracking for me.lol

@2driftlong 2 жыл бұрын

The voices in my head were saying, "you're screwed now", but my hands were saying "you can do it!". I had nitrile gloves on, not that it would save me from injury, but it did provide the grip needed. Would I do it again? yes, because I know it's possible, and there is a bit of technique to it. However, I now know that you can buy the entire recoil starter unit, which includes the pawls, cord and the housing, all ready to go, for just $19 AUD.

@mbafmax 4 жыл бұрын

thanks saved my bunch of $$$

@ZombieDaveAZ 4 жыл бұрын

Thanks for watching Mark. I hope you subscribe. Lots of tips/ tricks in my small engine videos.

@visserboonstra 4 жыл бұрын

thanks, it workt. i fixed it Greetings from the Netherlnds

@ZombieDaveAZ 4 жыл бұрын

Happy to help. How are you guys doing in the netherlands now? Here in Arizona we are just now getting the full brunt of the covid. Stay safe and thanks for the comment. 🍺👍😷

@visserboonstra 4 жыл бұрын

@@ZombieDaveAZ It is going quite well in the Netherlands. Almost no new people with corona. You only need to wear a mask in public transport. Furthermore, keep 1.5 meters (6 feet) away from others. If you feel sick you must stay at home and you will be tested. Everyone works from home as much as possible, including me for 4 months now. Our government makes decisions based on science and what the experts say. Explains everything clearly on TV and shares all information honestly and also says that they have to make decisions based on the data they have at the moment, so it can sometimes be wrong but they do everything to keep it under control .We (our family) have all been ill but we were not tested (there were not enough tests in the beginning), so we don't know if we have had it. More and more companees are opening up but people are all very careful. Young people see few problems and want more and more freedom, so there will still be new outbreaks, but the hospitals can handle the pressure. I am afraid of the second wave after the summer, but we are now better prepared than in January. time will tell. Stay strong and safe. Greetings Mark

@mluigic 4 жыл бұрын

Thank you so very much. Saved me from having to buy a whole new assembly.

@ZombieDaveAZ 4 жыл бұрын

Happy to help and thanks for subscribing to my channel. 👍

@carltonbreezy 4 жыл бұрын

Man, that was tense! I'm about to attempt one, wish me luck.

@ZombieDaveAZ 4 жыл бұрын

Good Luck buddy !!!

@carltonbreezy 4 жыл бұрын

@@ZombieDaveAZThanks, man. I managed to coil it up 3 times so far. That means 3 fails when it comes to making it bite when put back in the housing. I copied your method but cut a small piece of wood with the nails in so I can rotate that . Plus use a small stick to keep it flat. It's a mixture of defusing a bomb and trying to put a cat in a sack such was the sweating. Gonna try again after a beer!

@crippleguy415 3 жыл бұрын

Cussing help me a lot . 😂👍🏻 Way AWESOME video . 😎👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

@danellwilliams6309 4 жыл бұрын

Thank you!!!

@peterbrown1968 4 жыл бұрын

good job now you can do my one with my new rope lol 😎

@ZombieDaveAZ 4 жыл бұрын

kzfaq.info/get/bejne/jZx9iqh0nb25kZc.html

@JohnBruno-yi1ex 15 күн бұрын

I havent taken mine all the way apart but got new rope in and wont get tight even though the 2 finger things are comming out when i turn it in one direction

@ZombieDaveAZ 15 күн бұрын

That's the starter pawls working correctly. If it won't recoil then the problem is spring related.

@timbenham516 4 жыл бұрын

Subscribed 👍thankyou good sir

@karachipeople5110 4 жыл бұрын

thank you so much SIR

@ottoclinton 4 жыл бұрын

Man that's one scary hairy arm! & that spring looks like its got oomph!

@ZombieDaveAZ 4 жыл бұрын

Lol! Right on both counts. Thanks for stopping by. I hope you are safe from the bushfires. You in Australia?

@ottoclinton 4 жыл бұрын

@@ZombieDaveAZ yes.not too close but we all experienced the smoke & red dust.keep up the good work!

@michaelspeakman8924 3 жыл бұрын

I just wind the Spring inside of its holder. It's a whole lot easier than doing it the way he is. I want to know an easy way. Upsetting the Spring. After you get it rewind because it is hooked on both ends. I noticed when I took some of these Springs had tape on them. Still doesn't help. When you're hooking to spring on two ends

@jamesmurphy1389 5 жыл бұрын

Super guy. Thanks!

@ZombieDaveAZ 5 жыл бұрын

Thanks James.

@CaptureMotionVR 5 жыл бұрын

Thanks man...that's a bad chicken all right...:)

@MarkO-dl7sx 5 жыл бұрын

The best way to do that is to hook the other end of the spring into the pulley and loop the spring and sit it down in the pulley one loop at a time till it's in.

@ZombieDaveAZ 5 жыл бұрын

True but some spots where you try to start the hook wont let you. I have anothet video of doing exactly what you said on a little 2 stroke trimmer or something. Thanks brother.

@michaelchillingworth7042 5 жыл бұрын

@@ZombieDaveAZ vampire diry

@naughtafraid 3 жыл бұрын

Thank u Dave

@ZombieDaveAZ 3 жыл бұрын

You are most welcome Pete. Stay safe 😟👍

@AntwanThompson-b9s Ай бұрын

❤

@ZombieDaveAZ Ай бұрын

Appreciated 👍

@viktorkolb4834 4 жыл бұрын

Sehr deutlich .Danke

@ZombieDaveAZ 4 жыл бұрын

so glücklich, dass es dir geholfen hat. Bleib sicher. 🍺😷👍

@qudusbaba 2 жыл бұрын

The spring refuse to say at the middle of the plastic which doesn't allow it to hook the cover meter

@wwc4c777 3 жыл бұрын

Why don't you draw a circle on your table this same diameter as the inside of pulley?

@ZombieDaveAZ 3 жыл бұрын

I can't be sure but sometimes I drink. When I drink, I dont think. That's an excellent idea that I never thought of. Thanks for the comment and stay safe🍺👍😷

@markodom8828 4 жыл бұрын

I almost made the mistake of trying the methods suggested in this video. Then the next suggested video was the official Briggs & Stratton video on how to do this repair. They have a much simpler technique and no need to worry about the spring flying back at you.

@ZombieDaveAZ 4 жыл бұрын

Post the link please. If you can get any spring started you can feed it in. The KEY is getting it started. Don't be mislead, even after 1 wind that spring is now holding energy and can get you. Thanks for watching and be safe.

@michaelsmith6514 6 ай бұрын

This guy

@mrfixitusa6165 4 жыл бұрын

WHAT IS UP with all the "crazy neighbors" who for some odd reason always feel compelled to tap their horn every time they pass ones house!? I mean, if I'm out in the front yard and you can physically SEE me and there's a chance I can SEE who it is blowing, fine, I get it, tap away. But I'm all the time having folks "BLAAGH BLAAGH! When I'm not even out there! They don't even know if I'm home. They don't even know if I'm in the dang STATE! ...but you can bet they blowin! Now how am I supposed to know WHICH one of the 50 people you are that is constantly tapping the dang horn every time you drive by??? People ARE crazy man!

@ZombieDaveAZ 4 жыл бұрын

Lol, soooo true on all points! Thanks for stopping by. Stay safe. 👍😷🍺

@brianheim8439 10 ай бұрын

Holy f*** man spit it out already

@ZombieDaveAZ 10 ай бұрын

Lol Brian. Read the comments brother, you are an island. Thanks for spitting out your comment and don't forget to subscribe. 👍🍺

@rageonyx 4 жыл бұрын

4:17 He actually starts doing it

@ZombieDaveAZ 4 жыл бұрын

4:16 minutes of foreplay.

@rageonyx 4 жыл бұрын

@@ZombieDaveAZ I still managed to get the money shot without it. 😉 Great technique on your part. It worked great.

@ZombieDaveAZ 4 жыл бұрын

Stay safe and thanks for commenting. Between You and And me I cracked myself up a little. 👍😷🍺 Stay safe my friend

@alexandraward9327 4 жыл бұрын

How tight should the 10mm bolt be just enough to let the lil arms come out?

@ZombieDaveAZ 4 жыл бұрын

Hello Alexandra. The 10mm bolt should be a shoulder bolt so just snug should do the job.

@Josh-tc5nu 4 жыл бұрын

When I try put the rope round it’s clicks and doesn’t take the rope around and has no resistance

@ZombieDaveAZ 4 жыл бұрын

Hi Josh, thats because the soring did not catch on the center part. If you are sure that it IS catching in the middle, you are winding th rope the opposite way of how it should be. You will get it just have a little patience. 👍

@taniamariamaukau9099 5 жыл бұрын

garden gloves would be more pleasant

@gazoontight 4 жыл бұрын

Thank you!

@gregorywilliams3533 3 жыл бұрын

Would it have been easier just to buy a new spring pulley it comes with a new spring. It,s ten bucks.

@ZombieDaveAZ 3 жыл бұрын

Absolutely it would be easier but not all of us like to do things the easy way. The way I see it is like this. You can load the mower and take it to a shop and have someone else repair it. OR you can search on Amazon and get the spring and pulley like you suggested. Then there's guys like me that enjoy fixing things but need a little guidance. So we go to KZfaq and see how others do the repair. Then make the repair. It gives you a good feeling when you do stuff with your own hands. 🍺👍😷

@gregorywilliams3533 3 жыл бұрын

@@ZombieDaveAZ 😆 lol

@howard51723 5 жыл бұрын

A job that comes straight from hell, I've used the exact same technique, it works but still a nightmare job

@ZombieDaveAZ 5 жыл бұрын

Definately keeps you on your toes. Lol

@bobbyjones-uv5cn 4 жыл бұрын

I did it with my hands only.

@katherinelove9062 Жыл бұрын

My hands are mangled.

@341788 4 жыл бұрын

Didn't realize he used nails. Felt like a weakling with the trouble I had with just my hands, lol

@philliphall5198 Жыл бұрын

I use a wood screw to hold tail and electric drill ( bolt with a slut in it and just wind it up

@bennyrussell5551 5 жыл бұрын

You do not have to remove the spring to replace a rope

@ZombieDaveAZ 5 жыл бұрын

Listen to what I say @0:37 . Im speaking in the 3rd person as if you may have attempted to replace a rope or spring and you somehow managed to have the spring unload on you. You are correct. No need to remove the pulley to replace a rope. 👍

@michaeldodson5117 5 жыл бұрын

@Benny Russell Most people are here because we searched how to recoil the pull start. It's pretty self explanatory when replacing a pull rope, don't think there would be much of a video on a simple job like a pull rope.

@ZombieDaveAZ 5 жыл бұрын

@@michaeldodson5117 maybe this is what benny wanted kzfaq.info/get/bejne/mdGRmpCVz5uwg2g.html

@stuarthay1 4 жыл бұрын

Crazy neighbour, vrooom. Peep peep. 👋👋. unspring. 💪🖕🤬

@richierich1283 Жыл бұрын

Had killed me

@stevirussell3180 4 жыл бұрын

HI Dave, I would like to contact you regarding the use of this clip in a video I am producing. Could you please share your email so i can send you the details? Thanks, Stevi

@ZombieDaveAZ 4 жыл бұрын

I have a question for you first. Why is it when I click on your avatar you have no content. Hmm

@stevirussell3180 4 жыл бұрын

@@ZombieDaveAZ This is my personal account. You can email me directly at stevi.russell@vmlyr.com

@stevirussell3180 4 жыл бұрын

Hi Dave, Still looking for clearance for this content. Honestly, this is a fair and honest request from a producer (myself) based in Sydney, Aus looking for your permission to use a section of one of your films in a clients online video. The video to be produced focusses on how people can teach themselves almost anything through KZfaq and we think your videos are a great example of this and would be great supporting content. You can contact me at stevi.russell@vmlyr.com as I have mentioned below. If you don't wish to communicate I wont bother you further. Thanks S

@ZombieDaveAZ 4 жыл бұрын

@@stevirussell3180 whoops sorry I forgot about this . You have my permission to use whatever you need. Does that work? Email me at zombiedaveaz@gmail.com

@chasethatass3627 4 жыл бұрын

Life? Is this the best it's going to get? If so, can I just use my u tube app, press the bottom of screen to the end part ? "My ass still going to post it" Ty hank hill. Maybe on the next video boomhouser can do the best way of rewinding ideas?