Very nice vid !!!!! Thanks for the correct setup.

Thanks fot the tips. It will be great for my new Serpent Viper 977 EVO 1/8 GP 4wd.

Glad I found this vedio because my clutch setup was wrong at 1:10 shows the correct way to set the shoes now I know why my clutch never engaged Thanks Alot

your question is old but I thought I'd answer it anyway. that clutch assembly does not switch the gears in a 2 spd system. it's just a different clutch design for the motor. there is separatete clutch system to switch gears in a 2 spd car. works slightly different by centrifugal force forcing the clutch shoes out. which is adjustable usually via a screw on each shoe

Great info video

@kyoshoevolva1 most 1/8 clutch bearing is 5x10x4mm. Make sure it says "clutch" bearing. I use Acer for my Evolva M3

Good for new comer for Cenrax Type clutch adjustment ^_^

Pro tips for the 977e please

Hi Michael, I have just bought serpent 747 nitro. I have a problem w/ the clutch assembly, gear is not engaging even in WOT. I leave .5mm space in spring not & the gear spin freely during manual test but doesnt engage when engine is ON, I have dout that the stock spring is too hard. Please help solve the issue, thanks.

We need the Pro Tips Michael Salven where are you these days brother?

Hello brother which clutch are you working on in this video? And also is that a centax-2 or 3 clutch bell?

the 2 speed clutch needs to be more times replaced compared to the one speed clutch ???

hey whats the name for this motor?

its good bro...,awesome, , make me be the faster racer., because of the condition of the car have the proper setup... thanks alot., very appreciate for ur guardian .

I can do what he did but I don't understand how one adjustment doesn't affect the other: anyway the video was very helpful I'll just follow it step by step

Shoe was inverter ???

Hey micheal I have an rex rer5 .12 with the Mugen centax clutch looking at video the set up was a little different the spring washer was on top not bottom I put it in but now have a little play but not as much but the bell still speens freely what happens when it's a little or no play from bell to the shoe. Mtx4r rex

Thanks *

I just don't get it may I'm just stupid how does outing a shim before the bearing not change the clutch gap and why adjust the clutch gap with out the bearing I need some some more detailed info I tried setting up my clutch on nova .12 and the fly wheel came loose I took it to my hobby shop for them to do it I want to be able to do it myself I get frustrated when I don't understand how it's done and why I understand how the push clutch work but the gap adjustment and why I'm lost

hello can u help me with my rc

I assembled two kits no problem but when I bought Rossi engine I just don't understand how to setup the clutch properly I know Salven knows what he's doing but this has caused me to lose interest in this hobby I wanted to be a racer so badly the hobby shop and racing club in my area don't help new comers just frustrating

Vergleich zum anderen Profis bist du ein amateur🤣