Shaun Whale's guide to 12v setups at REDARC HQ

No video

Shaun Whale's guide to 12v setups at REDARC HQ

Рет қаралды 18,455

Күн бұрын

Want to learn more about 12v setups for your 4WD? Take the guesswork out of selecting the right product with a tour of the REDARC factory with Shaun Whale from 4WD 24/7.
Whether you're after a simple dual battery system, complete power management or just want to keep beers cold with a portable 4WD fridge, there's a 12v option from REDARC to suit any need or budget.
Find out the best system for you thanks to REDARC's handy selector tools:
AU: www.redarc.com...
NZ: www.redarcelec...
USA: redarcelectron...

Пікірлер: 8

@jasethejewman 10 ай бұрын

That's why I went redarc for the support they have .... 👍

@MarkSpencerAZ 3 жыл бұрын

May I also say that RedArc support after the sale is excellent! Thanks for the Video! Their test capability looks more like the Aerospace industry where I work.

@REDARCElectronics 3 жыл бұрын

Thanks for watching, Mark. And for your support! We hope to be of service to you again soon.

@terryoleary5424 3 жыл бұрын

I love red arc they are the best. Bush they need to make a Manager 50 to do lithium batteries justice

@JesusWSalazar 3 жыл бұрын

@Redarcelectronics I have a Redarc BCDC1225D and the SBI12KIT (12v not 24v) for a dual AGM battery set up, in the engine compartment. I'm attempting to equip both the 'Jump Start' feature AND the 'Ultimate Dual Battery for Winching' feature, which the SBI12 enables. Questions: 1) For jump start feature of the sbi12, what is the minimum size momentary switch (amp rating) and minimum fuse size (amp rating) needed for that switch? 2) Also, can the same switch be wired to the SBI12 to accommodate both the jump start feature and the ultimate winching feature (i.e. in this scenario I'd replace the momentary switch with a latch or rocker style switch to accommodate both jump start (when truck starter battery dead) or to connect both batteries (while truck on) during winching)? 3) Or, are 2 seperate switches needed and if so, what size switch (amp rating) and fuse size (amp rating) is needed on switch connected to 'Ultimate Dual Battery for Winching' set up wiring? 4) Lastly, what minimum amp rating does relay need to be, for 'Ultimate Dual Battery for Winching' side wiring? Much appreciated.

@JeepTJay6 2 жыл бұрын

7:37 What if I have 2 small 28Ah AGMs hooked up in parallel (totaling 56Ah) Is the BCDC1225D too powerful?

@mavo0673 3 жыл бұрын

Is there a lithium battery that can be used as a start battery

@REDARCElectronics 3 жыл бұрын

Hi Andrew, there are some LiFePO4 batteries that are advertised as being suitable for cranking batteries. When used in a dual battery system however, it is important to ensure the auxiliary system is isolated via vehicle ignition - this is due to the higher resting voltage of a Lithium battery. Any further questions please don't hesitate to call our Tech Support Team on 08 8322 4848.