Wharncliffe Knife & Sheath Build | Knife Making
Рет қаралды 77,296
3 жыл бұрынHere is a blade design that has been making a comeback! I feel like I've been seeing more and more Wharncliffe knives on the inter-webs over the last few years (and sheepsfoot knives). Personally I always thought they looked cool... so here is a full build of one with a leather butterfly pouch sheath. I may end up turning this into an EDC wharncliffe!
⭐PDF Plans now only available for Patreon subscribers - / redbeardops
🛠Notable Items:
Checkering File - amzn.to/3bg2iER
John James Saddlers Harness Needles - amzn.to/31QzfWp
Dremel Power Burnishers - amzn.to/3iL16N4
Wilton Pipe Vise - amzn.to/2WkOmUu
Kant Twist Clamp 1'' - amzn.to/332ygmu
✅How To Videos & Reviews:
Build A Surface Grinder - • Homemade Surface Grind...
WEN Sharpener Review - • WEN Sharpener Review &...
DIY File Guide - • DIY Carbide File Guide...
How To Grind Bevels - • Knife Grinding Basics ...
⚠️My Favorite PPE:
Resp-O-Rator (for beards) - amzn.to/2M6PMN7
3M Bluetooth Hearing Protection - amzn.to/38ock4U
🗡Knife Builds:
Hand Forged Damascus Knife - • Hand Forged Damascus K...
Bushcraft Knife - • Bushcraft Knife & Leat...
Deadlift Knife Challenge - • Knife Making Deadlift ...
Rod Pump Knife - • Making A Knife From Oi...
Forged Hunter - • Forging A Hunting Knif...
Hunting Knife With Bolsters - • Bolsters on a Full Tan...
⭐Red Beard Amazon Store - www.amazon.com/shop/redbeardops
📷Camera Gear:
Camera - Panasonic G7 - amzn.to/2SD8ekG
Microphone - Takstar - amzn.to/36euYLP
SD Card - 128GB - amzn.to/2tmVfZW
Narration Microphone - amzn.to/2XvKHD2
Tripod - amzn.to/2XmXrwB
**************************************************
Subscribe Here: / @redbeardops
**************************************************
Instagram: / redbeardops
Twitter: / redbeardops
#knifemaking
#redbeardops
#knifemaker
**********************************************************
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and I will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
@SaudiFalcon6927 3 жыл бұрын
The truth that I have visited so many channels of making knife.. You are the best with NO EXPTION.
@RedBeardOps 3 жыл бұрын
Thank you very much! Means a lot sir.
@blakeparthenay3049 3 жыл бұрын
Man, I am really impressed with the huge improvements you have made on your leather work in such a short time, nice work! That is a gorgeous sheath!
@RedBeardOps 3 жыл бұрын
Thanks a million sir! Taking some work, but it's paying off. Still have a ton to learn! Cheers
@kccustomknives4951 3 жыл бұрын
Beautiful knife love the stone wash finish and orange and black handle scales. Love watching your channel awesome content. Keep up the great work.
@RedBeardOps 3 жыл бұрын
Thank you sir! Glad you like it!
@poopyfacehole1426 3 жыл бұрын
I love that stone polish finished its my favourite 😍
@RedBeardOps 3 жыл бұрын
Me too! Thanks!
@CCCfeinman55 3 жыл бұрын
It’s great to watch your constantly improving skill set. Your conversational narration informs and entertains in your very subdued fashion. Thanks for having a great KZfaq channel! Oh, and the knife and sheath were great, too!
@RedBeardOps 3 жыл бұрын
Heck yeah Chuck! Thanks man. Really glad you're liking the videos.
@jjppres 3 жыл бұрын
Well done! Boy can you ever see the progression in your sheaths.
@RedBeardOps 3 жыл бұрын
Thanks Jim! The hardest thing for me right now with the sheaths isn't the construction, but the dimensions. I still get one that is too big or too small here and there. The pre-dyed quality leather really helped out. Cheers sir!
@jacobuscarstens7985 3 жыл бұрын
Make me Olson ons pls
@davidscadlock5569 3 жыл бұрын
NNnnnice job on the knife, sheath and the presentation!!! Learning a lot. Thank you!!
@RedBeardOps 3 жыл бұрын
Heck yeah, thanks David!
@rexwillmer759 3 жыл бұрын
We are in our 5th week of stage 4 lockdown in Melbourne Australia, in between designing and building my new 2x72 and gas forge I spend some time researching Knifemaking techniques. Your channel is way up on my list for sound practical advise always producing work ready knives. I appreciate that you don’t profess to be an expert at everything but just jump in and have a go, you have a very agreeable attitude. Best of luck and stay safe.
@RedBeardOps 3 жыл бұрын
Thank you very much Rex! That's my goal, just pass on what I learn from other greats! Cheers man.
@SuperSaiyanSalmon 3 жыл бұрын
Hey Rex, I'm just north of you in Bendigo and funnily enough have been doing pretty much the same thing! 😄 Got my forge going and am just rounding up all the materials to start on a 2x72. (Got my plans from Brian over at House Work - great channel if you haven't seen it already). I'm almost finished my first knife, made entirely by hand and while its been fun, I've spent most of it wishing I had that grinder haha! All the best man! 👍
@rexwillmer759 3 жыл бұрын
Tom Salmon my forge kit arrived at 5:30 tonight I’m waiting on a set of Wilmot grinder wheels to arrive so I can finish my 2x72 it’s my design having seen Travis Wurtes TW90 and Brian’s evolution send your email and I’ll send you some pics Cheers rex
@SuperSaiyanSalmon 3 жыл бұрын
@@rexwillmer759 nice work man! You can find me at tomsalmon4@gmail.com
@klimeksam 3 жыл бұрын
You should make a stitching pony. Really easy and very useful. Awesome job.
@RedBeardOps 3 жыл бұрын
Hey Sam! I bought one yesterday for 20$. I agree... really hope it helps out.
@gurvinderkau1e5w18 3 жыл бұрын
Great video. Knife and sheath look beautiful.removing material from centre of sheath is intelligent👍👍👍👍
@RedBeardOps 3 жыл бұрын
Thank you! It does seem to help with the fold!
@fabiancapra 3 жыл бұрын
Flawless job. Knife and sheath excellent.
@RedBeardOps 3 жыл бұрын
Thank you very much, Fabian!
@jeffputnam8554 3 жыл бұрын
Thanks for another great video. I am learning a lot from them and have improved
@RedBeardOps 3 жыл бұрын
Thank you very much Jeff!
@deanburney Жыл бұрын
Nice job!
@nightwalker2830 3 жыл бұрын
Me I love the look after it comes out of the heat treatment as an finish
@RedBeardOps 3 жыл бұрын
Agreed sir! Thank you!
@jameswilkes3186 3 жыл бұрын
Very well done. The sheath looks great.
@RedBeardOps 3 жыл бұрын
Thank you very much sir! Glad you liked it. One step at a time over here!
@sare1052 3 жыл бұрын
Yes I went back to see that bit, pity, I’d like them for mine. Love the way the handle turned out, like the notches on the back of the blade also!
@RedBeardOps 3 жыл бұрын
Thanks 👍
@ZyloXDT 3 жыл бұрын
Beautiful sheathe
@RedBeardOps 3 жыл бұрын
Thank you!
@smu1129 3 жыл бұрын
Awesome clean result!
@RedBeardOps 3 жыл бұрын
Much appreciated sir!
@ChristopherSalisburySalz 3 жыл бұрын
Very nice! Great process!
@RedBeardOps 3 жыл бұрын
Thank you sir!
@ZyloXDT 3 жыл бұрын
Love your design keep up the work!
@RedBeardOps 3 жыл бұрын
Appreciate it!
@philiplucky7170 3 жыл бұрын
Such a great video thank you
@RedBeardOps 3 жыл бұрын
Thanks Philip!
@greatdividehunting7887 3 жыл бұрын
Awesome result and a great vid as usual ... thank u
@RedBeardOps 3 жыл бұрын
Thank you! Cheers sir.
@abdo-hr9jr 3 жыл бұрын
Beautiful job 👍
@RedBeardOps 3 жыл бұрын
Thank you!
@vathouisk 3 жыл бұрын
Beautiful
@RedBeardOps 3 жыл бұрын
Thank you very much!
@The314moses 3 жыл бұрын
You do beautiful work my friend. It's a pleasure to watch. I wish you all the best!
@RedBeardOps 3 жыл бұрын
Thank you so much 😀
@chrisnoneyourbusiness7326 3 жыл бұрын
Another awesome knife as usual! I was finally able to make my first one because of your videos. Thanks for what you do.
@RedBeardOps 3 жыл бұрын
Awesome Chris! Glad you liked this one!
@johnfitzgerald4628 3 жыл бұрын
great video - thank you.
@RedBeardOps 3 жыл бұрын
Thank you sir! glad you enjoyed it
@REKKnives 3 жыл бұрын
Beautiful work once again 👍
@RedBeardOps 3 жыл бұрын
Thanks man!
@armadilloforge 3 жыл бұрын
Kydex is nice but leather is just looks and feels better. I'll have to give leather sheaths a go.
@RedBeardOps 3 жыл бұрын
Agreed! Takes a while to get it down... I'm still trying to get the dimensions right.
@indiedavecomix3882 3 жыл бұрын
I got a kydex sheath with an SOG knife and I can tell you I wish I had a leather one. The flexibility of the leather holds up better when hanging on your belt.
@DuaneT64 3 жыл бұрын
Your leather work is looking fantastic man ............and of course your knife work has always been.
@RedBeardOps 3 жыл бұрын
Thank you very much sir! Still have a ways to go!
@babc97 3 жыл бұрын
Very nice and clean piece , awesome !
@RedBeardOps 3 жыл бұрын
Thank you very much! Glad you enjoyed this one!
@wmcutlery54 2 жыл бұрын
I also use the same technique for the sharpening Notch by drilling the whole 90° and grinding to the hole at the edge to remove some of it
@MrAssis9 3 жыл бұрын
Another excellent and didactic video, thanks for sharing!
@RedBeardOps 3 жыл бұрын
Much appreciated! Really glad you liked it!
@jackdub75 3 жыл бұрын
Really nice work, on everything! That sheath looks killer.
@RedBeardOps 3 жыл бұрын
Thanks Jack!
@jasonhaines812 3 жыл бұрын
Fantastic knife awesome leather work you're a very talented person
@RedBeardOps 3 жыл бұрын
Thank you very much Jason! Glad you enjoyed this one!
@ClenioBuilder 3 жыл бұрын
Nice project! ❤❤❤❤
@RedBeardOps 3 жыл бұрын
Thank you very much!
@rexwillmer759 3 жыл бұрын
Nice work once again👍🏽
@RedBeardOps 3 жыл бұрын
Thank you very much, Rex!
@applevalleyknifeshop4242 3 жыл бұрын
Beautiful build! Very meticulous process. Subscribed.
@RedBeardOps 3 жыл бұрын
Thank you very much! Glad you liked it.
@Wengelsworkshop 3 жыл бұрын
Man you got me itching to make some knives again. Everything came out great!
@RedBeardOps 3 жыл бұрын
Heck yeah man! Good luck with your builds this weekend!
@joejhurojr3914 2 жыл бұрын
That is beautiful work mr. red bread
@RedBeardOps 2 жыл бұрын
Thank you kindly!
@cwmoss4124 3 жыл бұрын
Good job on both the knife and sheath.
@RedBeardOps 3 жыл бұрын
Thank you!
@lawrencelewis1036 Жыл бұрын
Nice work!
@RedBeardOps Жыл бұрын
Thank you! Cheers!
@cooperwelsh3471 3 жыл бұрын
Really enjoy your video’s as I told before I am just starting being an amateur knife maker with little tools. Just finished my first file knife. With only tempering. I wanted two wholes but drilling was not an option. Took me two hours with a diamant bit on my Dremel but I did it. Every day learning. I am open for tips. Cheers from The Netherlands 🇳🇱
@RedBeardOps 3 жыл бұрын
Heck yeah man! Glad to hear you're in the game. Keep up the good work!
@TyrellKnifeworks 3 жыл бұрын
Nice build! I need to make one of those rock tumblers and try that. 👍🏻
@RedBeardOps 3 жыл бұрын
Good luck sir! Thank you
@Jim-fr3gr 3 жыл бұрын
Good job on the build also good leather work.
@RedBeardOps 3 жыл бұрын
Thanks a bunch Jim! I'm working on that part of the craft really hard right now.
@julienmzs5978 3 жыл бұрын
good design !!!👏👏👏
@RedBeardOps 3 жыл бұрын
Thank you sir! Glad you like it!
@kalelisking 3 жыл бұрын
Love the Wharncliffe! Bloody beautiful build mate, well done!
@RedBeardOps 3 жыл бұрын
Thanks Darren! Really appreciate it; This one came out pretty nice. :)
@kalelisking 3 жыл бұрын
@@RedBeardOps Mate, really just appreciate your content and your in depth teaching ability. Australia is a knife loving country, and i'm happy to say your quality of content and product is very well received. Loving the leather work as well mate. Hats off to you Sir.
@RedBeardOps 3 жыл бұрын
@@kalelisking Hey man you're comments are much appreciated! I'm stoked you're enjoying the videos! Cheers from Texas!
@rroberts8501 3 жыл бұрын
Looks great... I'll be using the drill for the sharpening choil on my next build. I've always just used a chainsaw file, but that looked to be a lot easier for sure. Always enjoy your work!
@RedBeardOps 3 жыл бұрын
Thanks man! Yeah, I've been using that method for a little bit now and I like it. They all work though. Cheers sir.
@ronamedee2475 3 жыл бұрын
Wow ! The cadance of the voice over is amazing. Sorry of being critical before but so much more enjoyable to listen to now. You are an amazing knife maker that I have been following for a good while now. I make knives also and you bring new ideas and practices which help me and I am sure others as well. Way to go sir ! I really enjoyed this video.
@RedBeardOps 3 жыл бұрын
Thanks Ron, really happy you enjoyed the video! Cheers man.
@sepehralavi007 3 жыл бұрын
Its awesome knife .
@RedBeardOps 3 жыл бұрын
Thank you very much Sepehr!
@everydaybeard_99 3 жыл бұрын
Beautiful blade. I love the Wharncliffe design... Probably my favorite style of blade. Followed you on here and Instagram.
@RedBeardOps 3 жыл бұрын
Heck yeah, thanks Joshua! Glad you liked it!
@hughbuchanan9048 3 жыл бұрын
I like the symmetrical arrows on the scales . The G10 color went well with the color of that e sheath.
@RedBeardOps 3 жыл бұрын
Thank you very much Hugh! Me too!
@matti2276 3 жыл бұрын
Sehr viel Herzblut mein Bester, dieses Messer hätte ich auch gern, tolle Umsetzung mit überzeugenden Hilfsmitteln 👍🏼💪🏼
@RedBeardOps 3 жыл бұрын
Vielen Dank, mein Herr! Ich freue mich sehr, dass Ihnen dieses Video gefallen hat.
@TheArtofCraftsmanship 3 жыл бұрын
Great job brother! I really dig the tip of running a JFlex a little over the edge of the platten to get into the plunge lines. It’s a tough spot, and the idea is golden! Beautiful work.
@RedBeardOps 3 жыл бұрын
Thank you sir. A VFD really comes in handy at that point too. I'll slow it down a good deal when dialing in the plunges. I still don't get them right every time and have to throw that knife away. But I'm getting them right more often now with practice. Getting to the center line nice and straight is the first part of the battle. If that doesn't happen the plunges won't look good no matter what you do! Cheers man!
@TheArtofCraftsmanship 3 жыл бұрын
Red Beard Ops true statement😉.
@philbrownred6500 3 жыл бұрын
Wow, I sure got something out of it...good video.
@RedBeardOps 3 жыл бұрын
Glad you enjoyed it! Thanks Phil!
@REKKnives 3 жыл бұрын
You did the drill bit choil trick! 🙌🤙
@RedBeardOps 3 жыл бұрын
Oh yeah, thanks man. Working great. I think you left a comment on a past video, and I think I saw it on some other KZfaq's channel a while back... the combination was enough for me to give it a go. Pretty easy! Cheers, dude
@REKKnives 3 жыл бұрын
@@RedBeardOps yeah I'm definitely not the originator of that trick hahaha, but it does work well! Another few tricks to increase work flow... Don't bother with fully Sanding the outer rim, especially the edge. You will be doing that after scale glue up and grind anyway 😉🤙
@franotoole2702 3 жыл бұрын
Looking good m8!!!
@RedBeardOps 3 жыл бұрын
Thank you very much sir!
@MarcosGarcia-jl5lc 3 жыл бұрын
Amazing bruh!! I just started making blades.. I like I told my buddy.. I have some amazing butter knifes if needed.. lol
@RedBeardOps 3 жыл бұрын
Heck yeah man. I've thrown away so many knives! It takes a while to get your process down. Good luck with your builds, sir!
@michaelrobertson8795 3 жыл бұрын
pretty awesome bud👍✌
@RedBeardOps 3 жыл бұрын
Thank you, sir!
@michaelrobertson8795 3 жыл бұрын
@@RedBeardOps no problem anytime it takes a lot of effort to do that stuff, I know how difficult it is👍✌
@lookitsch 3 жыл бұрын
What I do for the ease of saddle stitching is keep the holes small initially, but right before the stitching I widen them up a bit with a awl. It makes the needles pass through easier and the hole eventually shrinks back down.
@RedBeardOps 3 жыл бұрын
Good tip sir! Cheers.
@rayroid6656 3 жыл бұрын
Ich wünschte mir Inder Nähe sein und mit dir zusammen ein einmaliges Messer bauen . Genial dein Arbeit .
@RedBeardOps 3 жыл бұрын
Danke dir! Ich bin froh, dass du die Videos genießt. Prost
@alexanderbertallo1995 3 жыл бұрын
MacGyver in tha house... Weĺl done btw... Keep up the great work...
@RedBeardOps 3 жыл бұрын
Thank you sir! Glad you liked this one. I'll do my best!
@josh88113 3 жыл бұрын
I need to get one of those leather stamps
@RedBeardOps 3 жыл бұрын
Hey man, I really happy how it turned out too. The process was supper easy. I think it cost about 80$. greyghostgraphics.com/
@aaronchapman1613 3 жыл бұрын
That is one of the simplest but perfect edc I have ever watched being made by hand. Great job.$$$
@RedBeardOps 3 жыл бұрын
Thank you very much, sir! Happy you enjoyed this one.
@trailruntim 3 жыл бұрын
Using Corby fasteners instead of plain pins mainly a personal preference? Black micarta pins would look good as well. The knife and sheath look great!
@RedBeardOps 3 жыл бұрын
Thank Tim. I'm a massive fan of crobies and loveless fasteners. They come in a few different materials (aluminum, copper, brass, stainless, nickle silver). I really like having a mechanical fastener holding the handle together... just helps me sleep at night.
@SVDIVYA 3 жыл бұрын
Indah banget motif pisau nya om juga keren bagus banget
@RedBeardOps 3 жыл бұрын
Terima kasih! Senang kamu suka pisaunya. Bersulang
@JuliusCaesar125 3 жыл бұрын
Mr. Keeton thank you very much for all the content that you publish on here. I am a small knifemaker from Austria and i apreciate all the content that you do because it gives me confirmation that i do a lot of it „right“ 😁. I would like to show you one of the designs that i use for making a sheath ( maybe put something together so that you could see it in detail ). I would love to see what you think about it maybe use it some time and make a video about it. best regards. Julian
@RedBeardOps 3 жыл бұрын
CHeers Julian, glad you're liking these videos. Feel free to email me at redbeardops@gmail.com.
@JuliusCaesar125 3 жыл бұрын
Next time i will build the sheath that i have in mind i will send you a couple of pictures of the making process. I hope thats ok. Best regards
@randyblackburn9765 3 жыл бұрын
Don’t remember seeing a Wharncliffe fix blade . But I gotta say , don’t know which looks the better the knife or the sheath , but they look damn good 👍
@RedBeardOps 3 жыл бұрын
Heck yeah, thanks Randy. Really happy you liked this one!
@walte99 3 жыл бұрын
Nice video and knife. I need to make a tumbler like yours and figure our how you are using conditioning belts after the maker's mark. It always wipes out the darkening. I use the single use vinyl stencils, a 12v battery charger to etch and ferris chloride to darken. Maybe using AC to darken holds up better?
@RedBeardOps 3 жыл бұрын
They Walt, I've had this happen with new conditioning belts. The one I'm using is an old belt (1year plus) and it doesn't get deep in the mark like the new ones do. AC could help. If you wash it out you could go back with some brass black to get it dark again.
@garetkonigsfeld2 3 жыл бұрын
You really should try a basket weave or some kind of tooling it adds so much to the look. Anyway great job thanks for sharing 👍
@RedBeardOps 3 жыл бұрын
Thanks Garet! I think I will down the road, just trying to get a clean good fitting sheath at this point. After I get that nailed down, I think I can embellish on them some!
@jcdupuy4809 3 жыл бұрын
Terrific job. Are you sure you don t want to make me throwing knives ???
@RedBeardOps 3 жыл бұрын
Lol, who knows! I may make some down the road. Everything I do sell to the public, I post on Instagram, so stay tuned! Cheers man.
@jcdupuy4809 3 жыл бұрын
I have to go to Instagram lmao
@jcdupuy4809 3 жыл бұрын
@@RedBeardOps if you do one it is for me.
@joshd6307 2 жыл бұрын
Love the video, thanks for posting. Just wondering what band saw you are using to cut out the profile of your knife? Looks like it cuts really nice. Thanks
@RedBeardOps 2 жыл бұрын
I'm using a Bauer Bandsaw from Harbor Freight
@bulldogkesel291 3 жыл бұрын
Nice
@RedBeardOps 3 жыл бұрын
Thanks!
@Nunca00000 Жыл бұрын
That is a great video. What is your main reason for not doing any grinding besides the profile prior to heat treatment. Warping?
@RedBeardOps Жыл бұрын
Warping, even heat with a forge based heat treat, and only needing to suit up / focus to grind once. I normally only do this on stock removal knives.
@MrMarsBlades 3 жыл бұрын
really nice, cheers, one question, did i see that you put your makers mark on back of the sheath? wouldn't it look better on the front?, thanks again
@RedBeardOps 3 жыл бұрын
Man, good point. I kinda like having it on the back, it's a little more discrete. But I don't think it would look bad on the front!
@evo9860 2 жыл бұрын
Superb craftsmanship! Quick question, what checkering file do you use? Not brand but line spacing and such. Great video fixing to go back in your archive and watch more!😬
@RedBeardOps 2 жыл бұрын
There is a link to my exact checkering file in the description of this video. Cheers!
@johnthemainguy9059 2 жыл бұрын
Love it. Get rid of the ricasso and choil and grind the edge sharp all the way to the heel and it's more useful, easier to maintain, and easier to build. My 2¢.
@RedBeardOps 2 жыл бұрын
Thanks for the tips!
@wardigger36 3 жыл бұрын
Nice :)
@RedBeardOps 3 жыл бұрын
Thanks 😁
@adventurefocus5319 3 жыл бұрын
Hey man, awesome build, enjoyed watching the process. Question I had, what steel did you use?
@RedBeardOps 3 жыл бұрын
Thanks man. I'm using 1084 from Alpha Knife Supply. Great stuff.
@adventurefocus5319 3 жыл бұрын
@@RedBeardOps Ah nice! Might be an idea to show a nice hamon/edge quench the next time you use it, gives such awesome activity!
@user-es2oy6xx4f 3 жыл бұрын
Аккуратно, хорошая работа.
@RedBeardOps 3 жыл бұрын
Спасибо!
@sudo_nym 3 жыл бұрын
James, man, your work is visibly improving each video. It was always great, but I see the fit ‘n finish of your sheaths becoming really A1! May I use your template? Cheers man 🇬🇧🤜🏻⚡️🤛🏻🇺🇸
@RedBeardOps 3 жыл бұрын
For sure man! I'm putting the plans out there for all to use. PDF link is in the description of this video. (I'm sure you saw that though)
@sudo_nym 3 жыл бұрын
Red Beard Ops I did see that, but thought I should ask first 👍🏻👍🏻🙏🏻 Cheers James! 🇬🇧🤜🏻⚡️🤛🏻🇺🇸
@clkersting 3 жыл бұрын
Two suggestions. Skive the stiched edges down to reduce the overall thickness. Lastly, get a stching awl to enlarge the holes before you instert the needles.
@RedBeardOps 3 жыл бұрын
Thanks Craig!
@barryburas5670 3 жыл бұрын
"I'll Be Keep Using It" Now that's a T-shirt!!
@RedBeardOps 3 жыл бұрын
LOL, no joke! Face Palm for sure.
@evloftis4143 3 жыл бұрын
another really nice knife and sheath bud great job!!
@RedBeardOps 3 жыл бұрын
Thank you sir!
@CSmothersForge 3 жыл бұрын
What is the style of leather you got from them? I was looking at their styles. And what was the cost?
@RedBeardOps 3 жыл бұрын
This is what I get form them in 7-8oz - wickett-craig.com/leathers/skirting/
@tango-bravo 2 жыл бұрын
Very nice work and great video. Question: when you do those last stitches in the sheath and melt the ends, did you tie a knot there? Maybe I missed that. If you don’t, have you ever had the soldered thread ends come loose after use? Also, have you thought of a rivet in the center of the belt loop circle stitch? One with a logo “RB”(?) would look pretty cool 😎
@RedBeardOps 2 жыл бұрын
I do not knot them. I'm relying on the large melted end and a tight hole with back stitches. I haven't had them come loose. That's a good idea!
@tango-bravo 2 жыл бұрын
@@RedBeardOps I’ve been watch the way both you and Ricky Wallace do the leather work on sheathes and I’m very impressed overall. Similar techniques but different approaches and finishes to the leather. Personally, I’d feel better both selling or buying a sheath for a using knife with a rivet up at the top corner and at least one rivet in the belt loop just “in case”. By the way I think your stonewash finish and overall finish with that grayish tone is one of the best stonewash looks out there! 👍
@spraggerstud2424 3 жыл бұрын
Grinding after the heat treat --> No hardness issues? I see more guys doing this I just haven't done it myself.
@RedBeardOps 3 жыл бұрын
Nope, knife blades are so thin in general that you'll get it hard all the way though. Just don't get the blade above your tempering temperature when grinding.
@spraggerstud2424 3 жыл бұрын
@@RedBeardOps rocknroll 🤘thanks!
@katherinealper3125 3 жыл бұрын
Where can I buy your knives? I really love your work and would love to support you art
@RedBeardOps 3 жыл бұрын
Hi Katherine! I really appreciate the comment! Right now I really don't produce very many knives and I'm not taking custom orders. When I do have a knife available for sale I put it up on my Instagram account. Sorry about that! Best way to support the channel is to do what you're already doing! Watching the videos and commenting. Cheers!
@MrLongboarder87 3 жыл бұрын
I was just curious why you don’t sharpen your drill bits when they get dual?
@RedBeardOps 3 жыл бұрын
Never took the time to. I guess I probably should, lol
@fruitflygaming4230 3 жыл бұрын
Is that "finishing nail" you used for the sheath just a basic nail? Probably a stupid question but I'm just starting out in sheath making, love your work man. 🤙
@RedBeardOps 3 жыл бұрын
Yep that's just a little nail that is normally used for attaching trim. Ive also found good results using similar sized needles.
@fruitflygaming4230 3 жыл бұрын
@@RedBeardOps Thanks!
@brianmansfield1777 3 жыл бұрын
That muffle pipe you use in the forge..is that just a piece of mild steel tubing? Also, does it take a lot longer for your blades to get up to temp when you use it?
@RedBeardOps 3 жыл бұрын
Yep, just a piece of mild steel. I put a cap on the end of it as well. Once the forge is heated up, it really doesn't take much longer at all since it maintains the heat of the forge.
@brianmansfield1777 3 жыл бұрын
@@RedBeardOps thanks! I assume you get a much more even distribution of heat along the blade. Mine do seem to heat treat ok, but when I etch them, some spots are darker than others. So I guess my heat treats are not as consistent across the blade as they should be.
@ianevans9168 3 жыл бұрын
Very nice from start to finish, where can I get that template, to do my first buil
@RedBeardOps 3 жыл бұрын
Hey Ian, I put all my templates up on here - www.patreon.com/RedBeardOps
@ianevans9168 3 жыл бұрын
From one red beard to another thanks Brother, much appreciated keep up the great work.
@MrNicovdw 3 жыл бұрын
sir , where did you get your sureface grind device set up from or did you build it your self ?
@RedBeardOps 3 жыл бұрын
I build mine. Here is the build video - kzfaq.info/get/bejne/lbaJrdeIs5immXU.html CHeers
@MrNicovdw 3 жыл бұрын
@@RedBeardOps thanks sir
@sare1052 3 жыл бұрын
What scales did you use for this build.
@RedBeardOps 3 жыл бұрын
Orange and Black G-10. I'm not sure where I got them from though. Sorry about that.
@hojjatahangarikiasari7670 3 жыл бұрын
👌👍
@RedBeardOps 3 жыл бұрын
THank you
@johnjones2151 3 жыл бұрын
Are you making butter knives
@RedBeardOps 3 жыл бұрын
not quite, lol
@robertciganovic965 3 жыл бұрын
What are those blocks with hole in it when drilling. I ment what are they called
@RedBeardOps 3 жыл бұрын
1-2-3 Blocks - amzn.to/2XC5PdO - Cheers man
@robertciganovic965 3 жыл бұрын
Red Beard Ops thank you sir
@joshwebb4442 3 жыл бұрын
It will really save you some money if you learn how to sharpen drill bits on a 2 72. Cheer!
@RedBeardOps 3 жыл бұрын
Yeah, probably need to get on that! Thanks man
@gavocrazy 3 жыл бұрын
Fucking Awesome.
@RedBeardOps 3 жыл бұрын
Heck yeah, thanks Gavin!
@mamdouhahmad9009 3 жыл бұрын
⭐⭐⭐
Полярная звезда - Kuzey Yıldızı
Рет қаралды 7 МЛН
Red Beard Ops
Рет қаралды 16 М.
The Rivers' Experience
Рет қаралды 4,1 М.
Tranding Viral
Рет қаралды 10 МЛН