Reengineering the Redcat Ascent Fusion!

Рет қаралды 5,183

Ай бұрын

We recently looked at the new Redcat Racing Ascent Fusion RTR RC crawler ( • I Test the Redcat Asce... ). While quite capable, I felt it was about at its performance limit when compared to other vehicles in its class.
I found the front end of the chassis quite busy. The rear end doesn't meet WRCCA comp ruleset standards, the tires have a LOT of sideways play, and the geometry up front just isn't quite right - there's even a little bump steer!
One issue with all this modifying this vehicle is challenging: you already have a good, strong servo, an FOC brushless system, carbon-fiber chassis rails, and a nice, lightweight body. So what do you do to address its shortcomings?
Well, I've spent a week on this and wanted to bring you a path to addressing the issues with as little pain and extra hardware as possible. Let me show you what I've done!
--
Find the upgrade parts here: rc-tnt.com/project/total-rewo...
If you have trouble printing my SOA mount, there's a better SOA option than my Shapeways one. Check this out: 1tenth.com/products/boco-redc...
Enjoy!
Join this channel to get access to perks:
/ @rctnt
Articles:
What's the Best RC Car? rc-tnt.com/guides/best-rc-car/
Best RC Crawler? rc-tnt.com/manufacturer/multi...
Follow us:
Website: rc-tnt.com/
Twitter @rctrailandtech and on Instagram:
/ rctrailandtech
WHERE TO BUY RC STUFF:
Buy kits, models & upgrades here: www.asiatees.com/shop-now?rc_...
Send money directly to people living in extreme poverty (lets combine our resources to help those most in need):
community.givedirectly.org/ca...
#rccrawling, #rcreview, #rcascentfusion, #redcatracing, #redcatnation

Пікірлер: 166

@1980VINZ Ай бұрын

I’m speechless. Your development of the car is FANTASTIC, you completely transform this beauty into a real competitor… And you took the time to resume everything on your website very carefully and you share everything for free… What can we say except BIG THANK YOU MATE YOU’RE THE MAN. Very generous, you make the hobby becoming even greater !!!!! I just hope the brand will respect your work how it should be, and not just pick up everything to improve their product without any words or whatsoever… Nothing surprises me anymore by these days… I wish I’m just saying BS. What a rig now !!!!! LOVING IT and looks even better… REDCAT should make a special version under your name like “Ascent TNT Evo Special Edition” or something and giving you a pourcentage on the sells, I’m sure this will be a big hit and a very very cool move from REDCAT !! Why not ?? 😃 Because actually everyone is agree to say it looks good but isn’t a good performer………. 🤞

@RCTNT Ай бұрын

Haha thanks, that's very kind. I wouldn't mind seeing an Acsent Fusion RC-TNT Comp Day edition or something, sure. That would be really cool. Glad you like it! Cheers

@onemanmayhem 5 күн бұрын

I raise my hat to you, sir! All the good things have been said... This is pure championism! 🎉

@RCTNT 5 күн бұрын

Haha, thank you. (I'd never heard the word "championism" before, that's a new one to me!) Cheers

@onemanmayhem 5 күн бұрын

@@RCTNT yea, here in Finland we innovate also 😂

@Andy_Yates Ай бұрын

It looks SO much better with that rear tray. Bravo getting that geometry sorted and designing a good servo mount. Very creative way to keep it a forward motor mount and allow for the front 4-link. You should feel proud that you're breathing more life and performance into that truck 👏👏

@RCTNT Ай бұрын

Thanks Andy, it both needed and deserved it, I think. Very happy with the outcome, obviously - I really only wanted WRCCA compliance, but once I'd started, I kept thinking how I'd like to fix this and that. Anyway, it's at a good version 1 point now. I'm taking a breather from it until I stop dreaming about Ascent geometry and cantilever angles!

@user-yi3qu9jg8l Ай бұрын

Really nice work! I also enjoy your diy ethic, so much more interesting and educational to make your own solutions when possible. AND for free to us! I (we all) appreciate you!

@RCTNT Ай бұрын

Thank you. It's my pleasure!

@canuckchuck8836 Ай бұрын

Those upgrades are AWESOME! Thank you for sharing them! 👍👍 I do not have an Ascent Fusion but I love your generosity. The cantilever suspension looks amazing.

@RCTNT Ай бұрын

Thanks! (it's not all generosity, I am making videos here, after all) - but it's my pleasure to share these. Feels good to have it sorted!

@cybron7089 Ай бұрын

Wow. I dont own an Ascent Fusion, but i acknowledge the great amount of fantastic work you put into it 👍

@HellaNorCal916 Ай бұрын

Wow! 🤯 That looks amazing. The better geometry and articulation actually comes through the video fairly well. 👍🏼

@RCTNT Ай бұрын

It definitely shows on the rocks. Just so effortless. I think I might still tune those inserts a bit, they're still a tad too firm, but on the whole, yes. Very happy with it!

@Bonurges Ай бұрын

Yes! Indeed!!!! Gosh mate what a great set of mods you’ve designed!!! I’ve said before and WILL say it again, I really appreciate your thorough and detailed testing and reviews.

@RCTNT Ай бұрын

Thank you for the appreciation!

@jrfishes Ай бұрын

Really impressive what you did with that rear suspension. Great work!!

@RCTNT Ай бұрын

Came up alright didn't it

@YoShImUrA53 Ай бұрын

This channel is the gift that keeps on giving!! Thanks for all the parts, Craig!!

@RCTNT Ай бұрын

My pleasure! This was a capital-P Project, and there will possibly be minor updates and tweaks soon, but I really wanted to just get it out there. Seeing the rig just eat the rocks now was so satisfying :D

@derrickhays3627 Ай бұрын

Thank you for pointing out the weaknesses and problems and not just saying it's awesome like a lot of other channels, it looks taller but is more planted with great flex superb job on the suspension set up👍 thanks for sharing.

@RCTNT Ай бұрын

My pleasure. No rig is perfect (yeah ok, maybe the Vanquish VRD Carbon comes pretty close) but there's always room for improvement! Cheers

@jayleeson8517 Ай бұрын

Bravo Sir Bravo, Fantastic way you have sorted the bad geometry on the car.

@brianmassey7563 Ай бұрын

I love what you've done. Seems to be a proper crawler now, and you've managed to leave the Redcat in it still.

@RCTNT Ай бұрын

Thanks Brian! I wanted it to still feel like the original car, yeah. Just... better! Cheers

@doodlepugg Ай бұрын

What a drastic transformation for an under developed out of the box truck. You've literally built it up to how it should've been out the box, mega satisfying to watch, especially the linked suspension! I'm massively impressed, huge credit to you and your experience

@RCTNT Ай бұрын

Heh thanks. It's not a bad rig in stock form, to be clear. The value for money is pretty great out of the box - better than nearly anything else, in fact. But there are some gains to be had with some tinkering, yeah! Cheers

@doodlepugg Ай бұрын

@@RCTNT that's fair. To me it just looks as though all the boxes for 'good things to have on a crawler' were ticked, but not properly thought out. I really like the look and idea of the stock truck, it just seems to be lacking the polish it deserves!

@RCTNT Ай бұрын

Yeah that's not a bad point, though it is quite capable in stock form. It could have been so much more with some redevelopment though, yes!

@HeavyHaulagePilbara Ай бұрын

Damn Craig. Love how you discuss your way through changes, rebuild for the Fusion and then share that knowledge. Appreciate it a lot as a newbi to the crawling fraternity.

@RCTNT Ай бұрын

My pleasure. I want to be helpful, youtube gives me a way!

@VS666 Ай бұрын

damn, i was kinda thinking of picking one of these up and with all the rework you've done i'm impressed, even more of a beast. that cantilever is nifty, love watching it work

@RCTNT Ай бұрын

Came up alright eh! Cheers

@annasoming Ай бұрын

yep.. right there with you. I had been saying this even from the non-fusion ascent came out; the geometry was bad and could be seen in pictures let alone in driving. I really didn't understand also how ppl believe this was a good value. It makes me sad how conditioned people are to believe this. The work you put in it should have been done in the factory; no reason for in 2024 for rtr's to a)come with brushed motors, and b)poor geometry. We should not have to fix their issues if we're paying for them assembling them; i now just build my own because in the end, its cheaper than buying an rtr and replacing so much and repairing their issues. Thank you for being so specific on the cons; we can't just say everything is great and we need brands to do better.

@RCTNT Ай бұрын

Thanks - though I will pick on one thing: some brushed motors are amazing. There's definitely a place for brushed motors in the hobby. Nice as FOC is, a good brushed system can be lighter and go better than a heavy Fusion (though of course, flat brushless outrunners are epic value and their power-to-weight ratio cannot be ignored!). But anyway, this was a satisfying overhaul :) Cheers

@Ryankhines Ай бұрын

Wow! What a transformation! The cantilever suspension looks so cool and works amazingly well. So much work went into it and you are sharing it with the world for free. You sir, are a gentleman and a scholar! :) In your instructions for printing the inserts you mention "Recommended filament: TPU (softest you can find)" would 95A work or should it be softer?

@RCTNT Ай бұрын

My pleasure! I don't know what the shore rating is of the generic filament I use, but try one and see what you think. If not soft enough, find a softer filament or try cutting a few pieces out with scissors or a blade.

@mattydeanwtf Ай бұрын

Awesome engineering mate, great designs 👍 can’t bet taking the redcat out of the redcat lol 😂

@RCTNT Ай бұрын

Aww I tried to keep it redcat, despite the changes! But I get what you mean. My fixes are still a little awkward, I don't like having the motor pointed so high and the xfer case shaft at that angle, but solutions meant compromises for this rig. I think we got there. Cheers

@dudleythree3 Ай бұрын

Great work mate, love the mods and the improvement from them

@RCTNT Ай бұрын

Thanks, me too. Satisfying 😎

@NowWattFPV 23 күн бұрын

Well done. GOOD ON YOU for making the inserts stl available.

@RCTNT 23 күн бұрын

My pleasure!

@rcarty419 Ай бұрын

Man you are Awsome love how you attack problems! I love my printed mini chasiss you designed! You are able to do what I look at an RC and want to do. Love the 3d inserts too I clip the ones I bought to make it like yours front vs back, but see you have em to print. Still not sure I like them So stiff on sidehills….but they do add great weight. Break it and fix it better!!!

@RCTNT Ай бұрын

Aw thanks :) I can design inserts with softer sides for better side-hill action. With TPU, that kind of thing is actually a bit more difficult, but I'm going to get around to thinking hard enough about it to implement a solution. I'm sure we can soften the sides up a bit, without losing greater carcass shape when it's not wanted. I'll keep thinking about that and we'll see where it comes up in future.

@kopigangrc Ай бұрын

Brilliant work and effort put into the geometry itself. It was carefully thought for. And it's awesome watching you drive it through the 6 courses. Really love the cantilever working the rear suspension. Thanks Craig for sharing the files too. Though I'm still waiting for the ascent fusion to come my way. 😅

@RCTNT Ай бұрын

Hope the Ascent Fusion fairy visits you soon then! Cheers

@pbruteforce1 Ай бұрын

Great job 👍

@cwthemachinist Ай бұрын

Highly impressive! Amazing work designing that cantilever rear and 4- link front. I also am not a fan of 3- link panhard set-ups. Great work friend. Another really good video. We think alike with tech design and engineering.

@RCTNT Ай бұрын

Thank you very much!

@LumpkinMumfins1 Ай бұрын

Looks brilliant! Well done getting this to its full potential! I’ll be looking forward to picking one up and throwing on all your mods before long, as that cantilever suspension is just fun to watch!

@RCTNT Ай бұрын

Awesome, I really hope you enjoy it!

@team_irish01 28 күн бұрын

Haven't forgot about this. Heading up to camp a weekend and crawl. As soon as we home I'll start back on it. Have 99% of it printed. :)

@RCTNT 28 күн бұрын

Oh great! Have a top weekend away and enjoy this when it's ready 👍

@team_irish01 24 күн бұрын

@@RCTNT Ok, so started putting it all together and found out the rails on the normal Ascent are different than the fusion. Time to switch rails...

@RCTNT 24 күн бұрын

They're C-channel rather than flat, yes? Is the motor mount too wide now, or too narrow? And can you just fit spacers inside the C-channel gap so the motor mount has a smooth surface to mate too? Idea: cut the motor mount 1mm shorter on each side in your slicer, before you print.

@team_irish01 23 күн бұрын

@@RCTNT No they are flat also, but I thin k the back end of yours is different cause the rear shock holding piece wont line up with anything

@RCTNT 23 күн бұрын

Ah that's frustrating. I'd gladly fix it up for you but I don't have access to a Redcat Fusion here yet! They're still not in Australia!

@pocketfuloducks1062 Ай бұрын

Thank you. That is all.

@michaeldorich4485 Ай бұрын

The crawler really performed extremely well. You've done a lot work an designing that has resulted in a great performance. The rear suspension just follows the surface of the rocks so well. It's extremely generous of you to make all the files available. There's a KZfaqr I follow who currently is into crawling. He's got a Redcat and another one. He has designed a wooden bed for his Redcat. I don't know if qualifies for a competition, but it looks good. His channel is MX Acres. You may want to take a look. He's a fun loving guy.

@RCTNT Ай бұрын

Cool! Thanks and yep, a tray is legal as long as it covers the chassis and is the width of the cab all the way back. Cheers

@michaeldorich4485 Ай бұрын

@@RCTNTYou're welcome. I don't think his tray is as wide as the cab. He has a beautiful area he's making into a crawling area.

@Bradkozakandfriends1830 Ай бұрын

Awesome job. Amazing

@RC-jt2gx Ай бұрын

Well done! 👏👏👏

@RCTNT Ай бұрын

Thanks!

@SDIRALN Ай бұрын

That is quite the extensive list of modifications, and honestly it looks to have addressed the biggest weak points of the Ascent

@RCTNT Ай бұрын

I sure hope so!

@damienjones7185 Ай бұрын

Well done. Do like how you haven't just when it not good enough and left it you have work on it and play with it. An top points for leaving in the servo mount braking

@RCTNT Ай бұрын

Gotta show a little of the process, after all! Cheers

@erwinadriaensen Ай бұрын

Nice! However, this is how this rig should have come rtr. I wonder if you could do an in depth vid on that type of rear suspension? I am fascinated by the cantilever setup.

@RCTNT Ай бұрын

I agree it has its issues, but my approach here probably isn't for everyone. I appreciate the kind words though :) Cantilever suspension is interesting, eh. I've got more about it in a review of a kit build I did a couple of years ago, with the Gmade GF02F. Check that out here: kzfaq.info/get/bejne/fKxxiLGd27rGqGQ.html (I wasn't as polished back then, as I was only a few months into making videos for youtube for the first time. But I still covered the suspension. It's cool, and I've wanted to try it again since then!)

@RS-sv3bl Ай бұрын

Brilliant!

@RCTNT Ай бұрын

🙏

@jeffparryncc1701 Ай бұрын

Outstanding work Craig. Are you working on a Wraith Spawn by any chance 🤔🥰

@RCTNT Ай бұрын

Thanks Jeff! You know, a Wraith is one rig I've never owned, funnily enough. It's a bit of a glaring gap in my RC experience!

@wickedrclines Ай бұрын

Incredible work! You are a master! Thank you for sharing this amazing work. 🫡

@RCTNT Ай бұрын

🙏🙏

@apocalypsezombyRC Ай бұрын

Impressive!!!!

@gpaull2 19 күн бұрын

I’d like to send you my modified servo mount, but can’t find your email listed anywhere. As per your request I don’t want to post it anywhere other than your website. The servo mount wasn’t able to survive my teenage sons driving, and Boco wasn’t willing to ship their mount to Canada. Instead I added material to your design and its now survived two of his outings. Previously it never made it through an outing. I made the area that bolts to the diff housing thicker. Where the tiny bolts go through, the mount stays the same thickness instead of slimming down. I also added material where large bolt goes through the mount. No problems so far! 🤞 Everything else has held up to his abuse and the truck is working amazingly well (better than my VFD carbon). Thanks again!

@RCTNT 19 күн бұрын

Oh you can post that up wherever you usually would! That's your modification to my design, go for it. Just reference the original when you do, all good! Thank you for the consideration though! My email is listed on the About page on KZfaq. Cheers!

@RCTNT 19 күн бұрын

... Better than your vfd carbon?! Holy Moly!

@Offroadflicks Ай бұрын

I had the same issue with servo mounts to!! Just ended up going with a boco steel mount 🤷🏼‍♂️

@RCTNT Ай бұрын

So far the bolstered one is good. I left the breakage in as a demonstration of when you get the alignment or part design wrong. But the current part should be strong enough. I can next try printing in PA-HT or else I might try my own design in stainless, from shapeways. If there's a cheaper, metal option out there for this car and in stock, like this Boco mount (that I will now look into, thanks!) then yes, that's probably the best option!

@RCTNT Ай бұрын

Oh wow, that's a great price! I've updated the video description with a link to that and a suggestion that it's probably the best option. Thanks for the tip!

@Offroadflicks Ай бұрын

If I was more skilled with a 3d printer I would’ve gave it another shot! But was tired of getting a couple miles into a trail and carrying it back because of a servo mount. Never again!! Lol but yes they make very good quality products in my opinion, also gives you some axle weight

@RCTNT Ай бұрын

@Offroadflicks understandable

@stefanhofstetter54 Ай бұрын

Great mods, look and functional 👍🏻👍🏻 PS: rubbing is already box stock massive….

@RCTNT Ай бұрын

Thankfully that's easily fixed!

@sledhedone 28 күн бұрын

i want that bed!!! that's sweet!!

@RCTNT 28 күн бұрын

Haha yes, it adds to the fun

@bbfpv9512 29 күн бұрын

great work I have just picked up this rig and I had to start printing your design as it looked so fantastic. I'm going through your parts and I'm unclear on a few things about your lengths of your links? some say eye to eye and others say rod ends. So the rod ends are without ball links?

@RCTNT 29 күн бұрын

Thanks, hope you enjoy it. The lengths are eye to eye. Rod ends always need ball links, so if the ones you're considering don't have balls you'll need to buy some, or find a different set of rod ends.

@pcoplin 8 күн бұрын

Looks great! Damn, now I need to get a 3d printer. Argh

@RCTNT 8 күн бұрын

Haha it's a whole extra hobby really. No hurry!

@gpaull2 Ай бұрын

Which way do you orient the front tire inserts? Almost got mine all together…thank you so much for sharing!!! 😎👍

@RCTNT Ай бұрын

Clawing forward into the ground, like aggressive animal running!

@gpaull2 Ай бұрын

Nice! Thanks so much for all of your hard work and expertise!

@darrylpaarman9100 5 күн бұрын

I am trying to decide on which Vehicle to purchase as my 1st RC Crawler. I like the Fusion or the Element Ecto. If I were to get the Fusion -this is the way I would want to go . I do not have a 3d printer though- Have you thought about making these parts for those of us who don't have the ability ? I would be interested in a complete printed set.! Thanks for all that you do.

@RCTNT 4 күн бұрын

Ecto is a super solid choice. Ascent Fusion is definitely premium, but I think performance will be more limited by how busy it's front end is. I've tried hard to address that but you'll be able to take the Ecto further with mods. I won't print and send my designs. Vastly impractical for multiple reasons. Best to ask in your local FB crawler group for someone who can print it for you. Keep it local. Much easier!

@darrylpaarman9100 3 күн бұрын

@@RCTNT thanks for the reply. Wasn't really expecting it. I just started watching your channel. Great content.

@RCTNT 3 күн бұрын

No worries and thank you.

@idworkhard Ай бұрын

Craig, are you concerned with exposed PLA and TPU degrading over time? Do you paint them or have you found filaments that don't degrade with exposure to water and UV light?

@RCTNT Ай бұрын

I don't know, honestly. The best test subject I have is my orange mini utb18 chassis, printed in pla+. That's been to many comps, been wet, survived a 6 meter fall off a cliff, sat in summer sun and surf salty air, etc. Still good so far. I guess we'll see!

@team_irish01 Ай бұрын

Will all of this direct fit the regular ascent also? Or do I need the fiber rails? Amazing work/channel. Subbed for sure. Thanks so much for your work and info.

@RCTNT Ай бұрын

I have absolutely no idea, sorry. The original Ascent still isn't in stores here yet and I know nothing about it. That said, if the Fusion is the same platform, then presumably yes. I can say the chassis type shouldn't affect the front end mods at all, though you may need an extra few mm in spacers for the rear, assuming dimensions are the same apart from steel C-channel rails. If you have a printer, it'll only cost you a buck or two in materials to print the servo and motor mounts to find out!

@team_irish01 Ай бұрын

@@RCTNT I sure do. Already planning on printing stuff up as soon as I get home!

@RCTNT Ай бұрын

Haha awesome. I hope it comes out nicely for you. I mean, if you're not running the Fusion, you may not need the motor mount. Depending on how long your motor is, you might be fine with just using the servo mount and fitting links yourself. Indeed, the rhino esc and short motor are a great choice if you don't have a Fusion in it already. Depending on budget, of course! s.click.aliexpress.com/e/_mt2tnQO

@team_irish01 Ай бұрын

@@RCTNT Fusion installed already. I auto install it on any of my crawlers now. Have to wait on some screws but Ill let you know compatibility. Should be pretty much identical as I believe the steel free is basically identical. I have changed my shock springs to the losi mini's tho. So that may effect the rear.

@RCTNT Ай бұрын

@team_irish01 if you still have your original springs you can go back to them, or, just see what you think of the new ones. Thanks for letting me know, that'd be great 👍

@procat78 9 күн бұрын

hey mate im trying to get my head around the printable parts and i cant seem to find the main spacer on the rear that the shocks bolt to

@RCTNT 9 күн бұрын

Hi Chris, you want 'Under-tray main spacer.stl' in the middle, with 'Full Length Tray Bracket LHS/RHS.stl' on each side of the chassis. Use either 4mm ro 5mm spacers from the 'Spacers.stl' file to get the shocks aligned parallel to the chassis and to each other. I haven't made time to write instructions with pictures but I've heard back from several folks so far who have got it built successfully, so I know all the parts are there. It's a bit of a tinkerer's project, this one, but you do have everything you need in the zip file to get this thing sorted. You could try laying it all out on the bench before you assemble the rear end, to help give yourself an idea of how it'll go together. Good luck with it!

@Offroadflicks Ай бұрын

Ascent $289 model non fusion or gladiator if you had to pick one? I know they are different breeds but I cannot decide !

@RCTNT Ай бұрын

Gladiator for trail and light crawling. Ascent for if you usually just crawl when you go out.

@VS666 Ай бұрын

I’m slowly but surely printing out this setup. I just got a Bambu X1C and have a lot of learning to do. I just finished the bed in ABS, is it normal for the file to not have the correct settings based on the readme? I’m pretty sure I changed the settings to what they were but I also thought the file would already have it saved

@RCTNT Ай бұрын

I didn't include a sliced file - that would be a 3mf file for the Bambu. Just the model, which is an stl. You need to slice it yourself. That means adjusting the settings in the slicer to match my recommendations. However, you're printing in ABS, which changes things. I have zero experience with ABS so can't make suggestions to change the files. My print guide is for the filaments as listed. Bottom line, you may need to experiment a bit (ie. Print the same part a few times) until you're happy. Comes with the territory, really! Though you've made it very easy on yourself with the X1C. I run a couple of P1S printers and couldn't be happier with them. Enjoy!

@VS666 Ай бұрын

@@RCTNT Thanks for the quick reply, perks of commenting at midnight I suppose! I am fairly happy with the ABS so far, but I'd like to do PLA-CF once I figure it out. Printing the SOA right now!

@RCTNT Ай бұрын

@VS666 haha yes, incompatible time zones for the most part eh.

@diffin69 Ай бұрын

Does anyone know where to get the cams? Whether it’s pre built or a printable file? I have every piece made for my fusion except the cams. Any help would be appreciated!

@RCTNT Ай бұрын

Sorry, I missed them in the original upload. Have made a couple of updates since the video dropped. Check the page again. Apologies for the hassle!

@diffin69 Ай бұрын

@@RCTNT no problem at all! I really appreciate the response! I’ll take a look and see what I can find. Thank you

@justinnoble2497 14 күн бұрын

What did you use for the links in the cantilever system? I just had these parts printed out and im trying to cover all my bases. As far as the front upper links go, what would you recommend for those?

@RCTNT 14 күн бұрын

I put a parts list in the READ ME.txt file that's included with the download. Specifically: Cantilever Assemblies 4x Ball bearings OD/ID/W 10/6/3 4x M3 Washers, wide 4x M3 40mm screws, any head 2x 45mm Links (I used 2x 22.5mm rod ends & M3 threaded rod) 2-8x M3 spacers, as needed to match ball ends Upper Links 2x M3 16mm flat or button head screws 2x M3 Nylock nuts (left-over from OEM vehicle) 2x Straight links, 74.5mm eye to eye -or- 4x M3 bent rod ends, 27mm 2x M3 threaded rod, 50mm I just bought various packs of rod ends and threaded s/steel rods from AliExpress and combined stuff until I was happy. For the canti links it was 2x 22.5mm rod ends & M3 threaded rod between them, with no exposed rod. That worked well.

@justinnoble2497 14 күн бұрын

@@RCTNT I found the read me. My apologies I didn't even open the files I just shipped them off to my person who prints and that was that. Busy month here as well, finally starting to slow down. Now time for projects and play. My Amazon cart is filled with odds and ends now for this one. Thanks a bunch for this. You're a hero.

@RCTNT 14 күн бұрын

@@justinnoble2497 my pleasure! Sorry I don't have step-by-step instructions for it yet. Big job, am also busy. But numerous folks have worked it out already so hopefully it's not too complex! All the best with the build!

@justinnoble2497 14 күн бұрын

@@RCTNT I didn't see it in the read me but does this absolutely require cutting the shock hoops off? I don't plan on running the bed but it looks like the rockers may mount to the bed rails. I'd rather not cut up my pretty carbon fiber if I don't have to 😂.

@RCTNT 14 күн бұрын

@justinnoble2497 no cutting required. They unbolt. But yes, you need to remove them for the tray to fit. That's why I developed the canti setup. If you don't want a tray, you don't need the canti setup - but it should still fit with the shock hoops. Though I don't know why you'd keep them on if doing that! Personal preference, you do you 👍

@charleshurley8927 Ай бұрын

I live in America, and I don't have a 3d printer. I also have the original redcat ascent, but I put a fusion pro in it. Do you think you can print everything I need to do my ascent this way? I'll pay. Thanks

@RCTNT Ай бұрын

I won't do that, sorry. I live under a time crunch as it is. That said, hit up your local FB rc or crawling group and ask there. Someone will be sure to help. It's a good bunch, rc people!

@charleshurley8927 Ай бұрын

@@RCTNT ok. I'll try and seeifi can send someone the downloads. Thanks anyway

@RCTNT Ай бұрын

I hate saying no but I've gotta be realistic. Very busy here! On the bright side, these designs could easily have been monetised but I've chosen not to. That really lowers the barrier to entry. All you need to do is share the webpage with the download and description on it and someone will be able to help, I'm sure. All the best with getting it done!

@TheLilhulk1111 Ай бұрын

Cool idea on the bed but it just does not look good

@RCTNT Ай бұрын

Thanks, I've been thinking similarly. It's been bugging me but I haven't put brainpower towards it yet (priorities!). I've had a few ideas: - raise the side bracket height to fill in the visual space under the tray, so it looks more solid; - play around with placement and shape of the wheel arches (I had a flat tray in earlier versions, but tire rub meant I needed arches); - try using the empty space under the tray to create a drop bed; - and of course, check what other trays look like in real life and incorporate some of those lines or cues somehow (you'd think I'd have done this but no, it didn't occur to me!) I'm open to suggestions, too. What would you change? Cheers!

@TheLilhulk1111 Ай бұрын

@@RCTNT maybe try and see what full-size crawler trucks are doing. It just seems like the arches are so far back but I do understand the wheels are really far back. Also, maybe it’s just the truck set up I don’t know.

@RCTNT Ай бұрын

The tray is necessarily short for comps, so yes, maybe it's just the wheel arches. Earlier designs were just a flat tray but the wheels needed the clearance. I'll have a play, maybe there's a way to improve it.

@TheLilhulk1111 Ай бұрын

@@RCTNT really like your content and I’m glad that you’re open to suggestions very comforting

@RCTNT Ай бұрын

If I know everything already, I'll stay dumb. Thanks for the exchange. I'm still thinking about the tray design, but haven't come up with something better yet! Cheers

@hunterhudson5146 Ай бұрын

I don’t own a 3D printer, could you print me a set? I can pay 🙏

@RCTNT Ай бұрын

I won't do that, sorry. I live under a time crunch as it is. That said, hit up your local FB rc or crawling group and ask there. Someone will be sure to help. It's a good bunch, rc people!

@hunterhudson5146 Ай бұрын

@@RCTNTI can’t download it off of your site

@RCTNT Ай бұрын

Just share the website with whomever you find to help you with printing and they'll be able to download it. Button is at the bottom of the page. I just tested it and it's working 👍