You missed one very important setting, in the Eucon pane in Cubase's Studio Setup. After years and teard of nagging, Steinberg has finally allowed us to let Eucon surfaces follow the visibility of channels in the MixControl. Make sure that "Mirror MixConsole Channel Visibility" is ticked! Otherwise ALL your channels will show up on your control surface (app). Try scrolling though 500 channels on an iPhone screen. If that doebn't drive you mad, nothing will.

Have you tried this app yet? How does it work for you? Just a little addendum based on some additional information I got from the EUCON Product Manager/Designer (thanks Eddie). 1. The link in the registration e-mail that you get after login into the app should now be fixed. But in case you missed it, it is supposed to go to: avid.secure.force.com/pkb/articles/faq/Avid-Control-Support 2. In the video I show how the controls on the app disappear when Cubase loses focus. That's something that you can avoid by a setting in the EuControl application that's running on your PC/Mac. If you go to the 'Assign' page, there are three checkboxes at the bottom. If you check those, the app keeps its connection to Cubase even when another application gets the focus on your desktop. Nice!

Good to know there is an alternative! I still use ICPro on my first generation iPad mini with iOS9. Works like a charm! I never really used it as a mix-help but mainly to start and stop recording and/or undo recording.

Solved all my drum tracking problems instantly. Thanks for sharing.

Was considering a midi controller or touch screen monitor, but the avid control app with Cubase did the job…greatly appreciated 👍

This is SUPER handy and it was so easy and fast to install. Thanks!

Using the EUCON protocol for my Avid Artist Control + Mix units. Works flawlessly since years.

I have already test it and it´s really easy, you install it and it´s already working and FREE, but I don´t usually need to control remotetly Cubase transport or Mixer what I use much more are shorcuts and this section isn´t so well implemented in Avid control so I replaced it with Touch Portal which runs in any old tablet and you can create a deck with all your key commmands, macros and PLE with nice buttons, plus you can also create a transport bar asociated to midi remote, though need some learning first, not as straightforward as Avid.

Downloaded on android mobile and android tablet. Works perfectly with Cubase 12 Pro 😁

success on first try, that show how detailed is the video instruction, a free midi controller on my ipad, i’m at a lost which device to use as i have bought nanokontrol2 and xtouch one, all work wonderfully

I was using my phone flawlessly everyday with the Cubase remote until the new iOS update. Crazy ! Going to check out the Avid control. Thanks for putting it on my radar !

I also have a Frontier Tranzport, but found that in the more recent versions of Cubase, it no longer worked. After fiddling with drivers and configuration for a bit, I finally got it to work with Cubase Pro 12, but while some of the basic functions worked, others did not, and I often found that it would become unresponsive during a session. I have the same issue where I need to record vocals or guitars, and when I do I'm usually sitting in another location away from my desk, so I need to be able to navigate the project, record arm tracks and punch in and out remotely. Ideally my Tranzport would function reliably, as I really like that piece of gear, but that not being the case, I needed another solution. I will definitely be trying the Avid Control app out to see if it will do the job for me. Thanks very much for the tip!

Thanks, I'll give that a try. So far, I achieve the same ambition for one of the main tasks, remote stop/star with a wireless keyboard. .record, reset to zero, move to markers, set metronome on/off, set cycle on/off, expand view, reduce view etc . .

Love your videos! Now all we need is an app to control the control room CUE mixes, so people recording at the studio can setup their own levels.

Thanks so much! You made such a complete tutorial on this, I really appreciate how well you taught me this cool workflow improvement!

As a Cubase IC Pro user I thought I was the only one whom had this issue. I First started noticing the issue with one of the iOS 16 Betas. As I am a iOS software developer during the day I have come across this issue with iOS 16 in project I am working on. So I know exactly what needs to be done in order to fix it. If I was to guess Cubase IC is not using much of apples UIKit to render there UI and if you are not using the ui orientation information from what is passed to your controller in your view controller to calculate your render it will render in the wrong direction.

Interesting, shall have to give it a look. I already use Metagrid on an old (which is important as it means cheap!) iPad. Metagrid doesn't have the feedback that this App has but it is totally customizable so you can have any commands (and macros, PLE etc) running from it. AND it locks to Cubase and doesn't lose focus even if you move away from Cubase. With this one on my phone and Metagrid on the iPad it could be the best of both for me. Cheers!

Saved me an hour figuring it out - it works ! Tks

Brilliant - thanks for sharing this. Love technology.😀

I don’t seem to have this problem with the icpro on my iPad, but I haven’t tried it on my iPhone. I will give it a look and get back to you but it seems to work fine for me and that was only a month ago.

great idea, my situation of recording in a vocal booth is exactely the same so I will definitely try this, thanks for this idea and all the good work!

Thank you very much for this huge tip! Also, it is possible to do more than simple things like moving faders, you can have great control on Cubase. Thank you again.

Thanks for this! I have been looking for a useable app for awhile, and this one looks decent.

Dude! This is gold. I was using TouchDaw but this one is amazing!

Just viewed this, very usefully.😊

you just saved me! i was installing the wrong option. not the S1 S3 /Dock/Control one.

top top top, Un grand grand merci Tony From France

Awesome. Thank you for this!

Brilliant, it works very well on Android too, tested just now on a Win 10 pc! Thank you so much for all your tutorials!

Thanks for this great info! Can you tell me the name of the program to show your iphone on windows screen. I searched for it but couldn't find it.

Thanks for the information. Seems cool. Was about to create a Avid account. Then they asked for my address & phone number so I uninstalled it. I'll stick for TouchDAW for now.

Steinberg just updated the IC Pro App to version 1.2.3 on December 14th 2022. Would love to see a review of it. Hopefully they fixed the bugs that were holding it back.

this worked - thank you!

Thank you very much🎉

Thank you!

Interesting, definitely trying this out

Hey man, thanks so much for this!! It actually works great, the only thing I couln´t find is in the monitoring section, how to adjust Cue mixes when using contriol room, maybe somebody has an idea...

Nice! Thank u!

I like reaper's implementation of this better. It does it though a web browser. No app required. The artists can even log in and control their cue mix. Everyone just needs to be on the same WiFi network.

awesome video thank you!

Fantastic app!!!! Thank you

Great!

he super cool! dank je well :)

Thank you brother Very useful video

Super helpfull thank you

I use open stage control, free and you can make both simple and complex controls and work using any browser capable device you should give it a look

Great tip! 👍👍👍👍👍 I’ve searched for remote apps a lot but never found any good. (In fact almost none at all.) Hope this will work for Bitwig too. If anyone knows, please tell.

You actually can tell the Controlapp to stay in Focus, you just have to activate it in the eucon app. On the Mapping page at the bottom.

thanks for that amazing Video. Avid Control is nuts for Cubase. So I don have to buy icPro.

You can use IC Pro with your browser of your mobile without download any app in your mobile.

Thank you so much for this very helpful and clear instruction. Just one question: is it possible to install it on Windows 10 and use the Avid Control App on my iPad?

Gonna try something like this. Just don't have enough room to have my laptop as close as I want so I gotta leeeeeeeeean over and try not to fall over if I need the key board.

I got this on my old iPad. Need to figure how to customize. I did see a KZfaq Vid on that years ago though.

How works the Connecticut between Smartphone and PC? Bluetooth, WLAN or cable ? What Do i need on my PC for a connector?

Doesn’t seem to work with Artist. Eucon installs but cubase doesn’t see it.

Hello I can't find the cell phone. It does not appear in Eucontrol Can you tell me how to find it? I think it has something to do with the windows 11 settings. Thanks in advance

Installed, everything works, thanks!

Aaaawesome. Who knew.

A new version of iC Pro was released in July 2023 (1.2.6.53) but it's not free and is designed for Cubase 11 or later.

never thought of this but looks like a good idea. one question though, can you use this for mixing more than one fader at a time?? or am I just stupid!!

That looks really handy. I wonder why Avid would make a free app that helps Cubase be better. What am I missing?

I installed it. Works fine. Excellent, in fact. However, it does slow booting up and shutting down Cubase, and adds time to closing out of saved Cubase projects. I've since uninstalled it until it becomes absolutely necessary.

Do advanced video for TouchOSC

Thx bro. Is it possible to control Midi CC with iPad? When yes, then how?

Hi thanks for the video. I have managed to get it working on my Iphone 8. However, the Softkey pages don't seem to be accessible. I see a "page 1" icon but I cannot click on it or swipe to another page. Any idea what I'm doing wrong. Thank you!

cool share!

unfortunately you need wifi on your computer for it to connect to your phone, which makes it not work for shows

Hi thanks a lot for this usefull video :) Do you know where are the cues? Because I rehearsall with my bandmates and each of them have his own cuemix, it will be great if they can adjut themself Cheers :)

Thanks a lot for your video I've got a problem following your guide: I installed avid control on my iPad but EuControl did not detect it. so there is nothing to add to the My Surfaces List. can you help me with this please

Thanks for the great video, and I have a question, how can I Invert phase on FX send ?

i don't get the eucon controller in the add device dropdown menu in cubase 12

Hello Sir, I am using Windows 11 and Android Tab, I have downloaded and installed Avid control App and EUCON on my Tab and PC. after adding my device when I opened my Cubase AI 13 the EUCON is not showing in the Add menu, list can you please guid me to resolve this issue

Hi, thank you for this great tip. I was able to get it working for Cubase Artist 11, where EUCON appeared in the add-device-list within the Studio Setup. I used a Asus chromebook as a tablet-connection!. However , sadly in Cubase Artist 12 the EUCON device didn't show up in the list. I Any ideas how to solve this? Ruud Jeursen

Hi, nice vídeo by the way… but there’s something probably I’m doing wrong… on my cubase I can’t find EUcon on “add device” what am I missing? Can you help. Thanks

Damn. I wish I could add a screenshot. I've installed the Eucontrol, but before this I installed the SKI adapter thing for Cubase IC. Then I found this video & thought I'd give the AVID Eucontrol a try. Well hell.... at this point I'm thinking paying the $20 for Cubase IC & fighting with that damn setup would be much easier. I've gotten the Cubase SKI to show up under the devices list in Studio Settings, but for the love of all good music, this Eucontrol is not showing up. All this, and for what? A remote control so that I don't have to turn around & fiddle with my MacBook Pro? I'm almost ready to say screw this bull.

I’ve tried using it on a tablet next to my Avid control surfaces until about a hear ago and stopped because of stability issues with Cubase. When reaching a certain number of tracks, and switching to the mixer page, the app would simply crash. At that time, I’ve shared example projects, log files and information with an Avid expert who was able to reproduce the problem and he was hoping that it would be solved in future releases. I’ve tried those newer releases several times but the problem wasn’t solved.

I'm not sure if you haven't seen it or disallowed my previous post? It may be stuck in review?

So I missed the step @4:35 to select the icon so how do i now set this paramater?

Can you use this with Cubase 12 midi remote and trigger custom macros from just a button push? Can you run this via USB so no Wi-Fi?

I've installed the Avid Control app but Eucon doesn't show up in Cubase 13 Artist for me to add it in Studio setup. Can anyone guide me on what I may be doing wrong please? 🙂

Do you need bluetooth in order to connect between the 2 devices?

remote control reaper with the reaper app for free

Can you turn on/off delay compensation?

This sounds like a pain in the donkey, I just use a wireless mouse and keyboard to control Cubase when away from my desk.

As long as Cakewalk by Bandlabs DAW is free, there's no real reason to get anything else!

this app is amazing but alot of crashes with cubase ..

Nice app. Luckily my IC PRO still works without any issues for years now, also in C12, still on my old ipad4 as well on my new iphone. So I don't get it. I see your IC PRO does not find your computer, could be the steinberg SKI ? Or maybe a Windows or internet connection issue between the two devices.

FYI. Are there any other Canadians that can't get past the "Zipcode" field when entering your personal info into the app? Ridiculous.

U CAN EVEN CONTROL PLUGINS

One of the reasons I now use Studio One.

Thanks

Steinberg.Where Launch to abandon is a business model...

Thank you!