After several videos your worked. THANK YOU!

Holy crap thankyou I was getting ready to get the drill out. Great tip with the warm water

omg I tried it and it worked now I can use 10 arrows I had instead of buying more. nobody wanted to do it. same exact arrows!

I'm glad I watched this very helpful, will try this thanks!

Worked great for my carbon arrows with plastic nocks. Put them boiling water for 15 seconds. Thanks 👍

Mine are plastic nock factory glued into aluminum. May give this a try. If this doesn't work, may heat the aluminum shaft with lighter and see if I can get it out. Want to install lighted nocks so thanks for posting. Not really concerned if I destroy the old nock getting it out, as long as it doesn't leave pieces of plastic inside the shaft. Aluminum will crack too, so gotta be careful.

do you have a pencil style soldering pen or wood burning tool?? cut the head off the screw, screw it into the wood burner or soldering gun let it get hot screw it into the nock and it will pull out in about 15 seconds if that long and not possibility of screwing up the fletching glue by dipping it in hot water. I saw it on Yee Haw 27 channel it works real well.

I cut the arrow almost down to the vanes to clear the nock insert then installed lighted knock, tried it with a 100 grain field point and shot deadnuts in bullseye at 20 yards.... If weight is an issue? I'm using 150 grain Excalibur bolt cutters anyways thanks for posting!)

thank youuu

It works 👍🏻👍🏻

A buddy at work said a heat gun might work. Wondering if anyone has tried it?? It makes sense because hockey sticks work very similar with removing stick blades and replaceing.

Why not boil the water

you should try it worked great

not for me

Does that mean that somebody bought a crossbow? LOL!!

No

Ruined 2 arrows doing this