RAY you've got no idea how impeccable your timing is with this video! Just a few minutes before you uploaded this video I was looking for exactly this information! You're awesome bro. Keep up the great content!👍👍

I LOVE that you don’t try and sell us on some course and just talk about general details of how you do what you do. You gave us chemical names, ratio’s, and techniques for success. Thank you from all they people just trying to learn out here!

Ray, Just wanted to say thanks for making these videos, I officially started my biz last year after retiring from the Air Force and you have been such an inspiration bro, especially your video about over coming FEAR, didn’t even know that was an acronym haha, anyway, thanks for sharing your knowledge and bringing positive vibes!

This is just good ol info for us trying to get started. Nothing drives me more crazy than these dudes trying to sell you a course for even the most basic details. This is awesome. Definitely subbed

That melted like butter! Seeing is believing!! Great work Ray!

Ray, ,Wanted to that you and Big John for your knowledge, handwork, professionalism, and quality work. Your and other channels have helped me begin my own business in California. Thank you for your inspiring and positive attitude.

4:1 ratio got the oxidation of the side of my house. The cleansol worked very well. Great video!

Honest to goodness, with all the folks out there that are coaching via KZfaq, in my opinion, you’re the one that folks need to have eyes on. First class job...again. There are a few folks that I've discovered that it is in my best interest to watch every.single.video. they have. You're one of them. Thank you for teaching me what I consider to be pressure washing best practices. I owe ya.

Ray great work on your videos I would like to take time to say you have done an amazing job on how your growing in your business I just started my own business in surface restoration doing media blasting and pressure washing here in Winston Salem North Carolina not too far from you I also work for a company for 14 years (Discount tire) and It was time to move on so i took the opportunity to take that leap of faith and start my own business there's a lot of videos I've been watching in trying to gather a lot of knowledge for some reason i keep come back to your videos just because your customer focus and your attention to detail is awesome keep growing keep pushing don't stop hustling enjoy watching every single video you have keep it up

Thank you for this video! We tried several things on our siding and nothing worked. I was actually looking into replacing all the siding on my house when I found your video and transformed our existing siding back to it's original glory! We have CertainTeed vinyl siding in the Flagstone color (bluish-gray) and it had oxidized so badly that it looked pinkish-purple. I love my house again. Thank you so much!

Great video Ray!! Thanks for sharing!!

Great video! Keep the knowledge coming for us little guys just starting out.

Awesome product and application process, great job guys.

Awesome video Ray, loving your content. Learning a ton. I would love to see a side by side comparison of a half done side vs a still oxidized side.

The quality of your videos has raised the bar & the quality of the content is spot-on. This is a video I will definitely add to my watch later playlist for reference. I just wanted to say, "Great Job, keep it up!"

Thanks Ray very informative as usual

Been wondering about that product. Thanks for the video Ray!

Great stuff... I've used this product multiple times in the same process you did and it comes out beautiful

Very nice job. Always enjoy your videos!

I'm re watching this ray I got the bc been using it thanks brother for the knowledge

Wow! Great work,guys.

Just ordered 4 gallons. Seeing is believing. Thank u again, your videos r top notch.

Great video and music! I just subbed, i'm a new home owner and I'm sure I'll be watching more of your vids ! :)

great video. shared this with my ops manager. thanks!

Thank you Ray for making this video. Because of this video I immediately ordered this product and only a few days after that I was contacted by a customer that has oxidation on one side of his house because the sun beats on it so much. I can't wait to try it out and follow exactly how you did it. If it all works out I'm just going to order a 5 gallon bucket.

Great job!!!

thank you Raymond great job good video.

I've learned alot from your videos

I appreciate the time you put into your videos. Awesome how humble you are and willing to help others. Just curious what was the last stuff you put on the deck with the pump up sprayer

Great video, thanks for sharing your knowledge!

Looks like it works pretty good

Great video brother. I have a job coming up for oxidation removal and re-watched your video as a refresher and to learn any tips I could. Big John is a beast! Wish I could find a team mate like that.

I think the lower sections get a little more heat and sunlight closer to the ground away from a roofs shade. Not sure if that is correct but I have noticed heavier hard to remove oxidation can happen at the lower 1/3rd of a building as well.

Barc 9 works really good for this

Liked ur video Ray u make it look to easy. Also good information to learn from i also do pressure washing n soft washing on side but now its slow 🐌 🙃 but good

Crushing it as always Ray!

Great video on this man thank you

I will give this a try. I think I’m a really really Good house washer but oxidation is more of those things that always has us scratching our heads. Did the siding have any sheen, when you got all that oxidation off. Wouldnt it be nice if there was something that would last that you could put on to the house and get that nice sheen like it’s brand new siding. I get asked that all the time fm customers “hey, can you wax my house and make it not so dull again?’ Lol I will give this product a shot. Really really good video. Probably the best one I’ve ever seen on oxidation removal. Keep up the good work young man. I’ve been at this quite a while and you’re never too old to learn a new trick. We have to stay dynamic.

This was the exact thing I was messaging you about. Wow I really needed to see this video, I was really concerned about the oxidation that I didnt notice

Love this video, tho, just what I was looking for, thanks!

Do you prefer the 12 volt vs. downstreaming because of the ability to apply your solution better? Thoughts on a dual port injector. You’re the man.

Great video. FYI that is a dust mask you are wearing. Not a chemical respirator. I’m a carpenter and use that exact mask all the time for cutting lumber. I also have a 3M respirator with organics filter when painting.

Great job!

Nice job!

Awesome job btw!

Beast!!! Did you charge by the job? Or sqft? Looks amazing!! I am learning soooooo MUCH!!! Thank you!!! 🙏🏾

Ray, tomorrow night is my first oxidation removal job on vinyl. I purchased the cleansol bc, and i want to downstream through my 4/4 machine. Any last minute words of wisdom? Thanks so much for the video, gaining wisdom all the time about this industry!!

Hello Ray thank you for the videos and tips much appreciated! I was soft washing my house and in a couple of places I passed with a brush to get some tough spots off and it left marks when you look a the vinyl siding from the side, I believe it could be oxidation, do you think this clensol bc product can help or do you have another recommendation? Thanks again and be safe.

Hey ray thanks for the great content you put out. will that product work on hardy board? I have a house to do that’s oxidized.

Hey Ray appreciate your videos definitely definitely help me jumpstart my business. I was wondering what chemical you would recommend for a mechanics/oil changing garage to clean the floor and block walls? Thank you

It didn’t work as well because your 4:1 solution downstream turned into more of a 20:1+… That being said, even at this ratio I’m very impressed with this product!

How well does the Cleansol work on aluminum siding? I've tried a pressure with chemicals from home depot but it never really got clean.

Use that Cleansol on the deck! Same ratio, 4/1 but not downstreamed. From a pump up, or your roof pump.

Cleansol BC is definitely a fantastic product so thanks for putting this out there. Absolutely love how fast you get the mix on the surface. Always reminds me when that trigger is pulled that when I'm making money. Hard work keep it simple and you can't go wrong. True but funny story I ran out of the BC and made my own. Holy Shit! What a learning experience. It was 10 times cheaper but now understand why it costs so much.

The. Clensol BC works very well

Hey Ray, what did you use on the deck to clean it ? Will it hurt the vinyl siding if it gets on it ? Thx so much

Hey Ray! Quick question.... I have an oxidation removal job, on a two story, vinyl sided home that has bad oxidation and someone zorroed the entire house. I'm running an 8 gpm with a high-draw injector (2.3) and I'm planning on mixing the cleansol bc at 3 parts water to 1 part cleansol bc. My question is, do you think that the process will work? Any recommendations would be greatly appreciated! Thanks in advance 👍

$600.00 per job for this sized of homes. My staff use hot pressure washers to get the job done quick. This much easier than cutting grass. But grass cut are the bread & butter in the long run.

Liked before it started

That was a clean job man! Wonderful. If I might ask you something, on every house wash job we do, in order to get it as clean as it should be we have to spend time with the pole brushes scrubbing the gutters and flashing and soffits. I dont mind doing it bc the end results are good. But from most of the videos i see out on youtube no one really seems to do that or show that part. What do you reckon? And what do you recommend?

Great video, I just got done washing my house with both dish soap and then a vinegar and water mix. Not satisfied. I'll be buying some of the cleanser bc. I wish I didn't waste my time scrubbing

Great content

This is a great video man! Def going to get some of this... anyway you can get me some info on the ball valve and tip your using looks much better than having to swap tips all the time. Thanks!

Thanks for the video Ray the soda beads that you use how do you use them and you use it in your house wash thanks

Great video, very helpful. Do you or Anyone have any recommendations on a good brush to use if needed?

Have you had a chance to see if warm / hot water makes any difference? Great video, thanks.

I love all your videos man I’ve learned so much from you what is the shelflife on that chemical you were using and does it kill visitation

Do you recommend a product to protect the siding from future oxidation? Thank you!

Thanks for the video. Good stuff. 2 questions: 1. How much Cleansol BC did you use on the oxidation house? 2. What hose are you running for your soft wash? Size and brand please. Great video. Keep up the good work!

Hey thanks for the oxidation tips itss made me a lot more $$$ but what did you use for the wood deck? Wood is not my thing

Can you use a X Jet to remove oxidation and if so would you follow the same instructions?

Hey Ray. I'm fresh into this game. If I was to use my softwash proportioner system to apply the cleansol bc for oxidation removal, could I have a drop stick that drops into the mix bucket and pull it through the 1/4" fitting instead of the soap tub? If so, at the 4:1 ratio, how many gallons of 'bc' would I use per wall (say, the size wall you covered in this video)? Thanks for any info. Trying to figure out my pricing per 5 gallon bucket of bc I buy.

Do i have to worry about etching glass when I use "pink stuff" when removing oxidation? It is a muratic acid solution.

Hey Ray. Love your videos and how they look professional! I did 1:4 mix of cleansol BC doing downstream. It didn't do anything. Didn't show any of the pickish film. Not sure if Im doing something wrong or BC doesn't work. Could I use 1:3 ratio with some cling on? I know the siding is really faded!! Any words is appreciated!!!

Hi Ray, I really enjoyed, and learned from your video. I did a house wash on Saturday, and today (Monday) the client said there were white splotches where the mold was.(she sent me photos, so I know this is true.) I'm going over to see it tomorrow, but I have no idea what this could be. I'm an interior painter/decorator, ordinarily, but am trying to make ends meet during this pandemic, so I take what I can get, but exterior washing is not my usual forte. I've done it a number of times before with no issues, but not a lot of vinyl washing, usually prep for exterior painting on wood. Thanks for any insight you might have to offer me. I sincerely appreciate it.

By far the best oxidation explanation on you tube.

Great job. I have three questions? With the oxidation problem, when you soft wash the house would the SH damage the oxide siding, what was the mix ratio on the oxidation chemical mix and how much was used to complete the house, how long did you wait until applying the oxidation chemical after applying the SH.

Hey Ray. HUGE FAN! Thanks for convincing me to start my own business. Can you tell me what tip you are using to apply the cleansol. Seems to be an adjustable nozzle after the ball valve. Please.

Is this product ok to get on windows? Also what brush are you using for scrubbing the oxidation?

Hi Ray thanks for your youtube video's I find very informative I am in Auckland New Zealand and we have water restrictions and not allowed to draw from customers supplies so need to find different alternatives I have got barrels set up to catch rain water so looking at that will fit a 1000 litre drum on my trailer like you had how much water would you say you would use to do a single 3 bed home and any other tips you would have

I have a question that I cant get answered. Hopefully you can help. Have you ever seen dirt or soot or something on siding right under the eaves where its shady? I've had a couple houses here recently and cant get it off. Thought maybe it was some kind of oxidation but like I said, it's all at the top of the siding where it's shaded.

Ray, was this actually downstreamed diluting it more from your original mix or was it softwash applied?

Ray, have you ever used this product to remove oxidized paint from a painted metal roof. If not what would you recommend, thanks John

Is Cleansol BC a complete substitute for SH (with oxidation removal features) - or do you use it SPECIFICALLY for the oxidation removal purposes?

Did you downstream the product on there with the pressure washer just like you would with Sh? If not how did you apply it?

Hey ray What attachments are you using to just go straight from ball valve to tip? no gun

Nice job my man appreciate the great videos an explanation and you guys overall attitude. What adjustable nozzle specifically for your downstreaming? Castle btw lol...

Hey Ray good stuff... Quick question... What would you recommend for cleaning aluminum gutters during a softwash? I usually use sh for softwashing vinyl but ive noticed it does absolutely nothing on aluminum... Thanks!

New to the game. When you batch mix the chemicals at 1:4 and drop your drop tube into bucket, what dial setting do you put your valve on? Aldo did you add surfactant?

Does cleansol Bc have ammonia in it? I’m washing my grandma’s house and she says her new windows can’t get ammonia on them. If so, is there an alternative method you would use?

BRO, Please help. Will this work on hardie board siding? I have some heavily oxidized siding on a house I need to quote, the owner put lines in the paint with his pressure washer trying to do it himself. Do I softwash first before the oxidation treatment? Thanks very much for any help!

Ray since you did this house a year ago, would you change the Cleansol BC mix ratio? I was thinking the DSI cut your mix by 4 more parts water making it weaker than recommended? Thanks in advance! Bill

Hey Ray, I wish we could know what you’re charging for the different projects. It could exponentially increase how viral the videos go!

Ray, how much product do you think you used on that house? 1,2, 3gal.?

Hey man, i made a huge mistakes. Mixed water & bleach and should have rinsed a section at a time. Waited till i sprayed the hole house siding. Its a light tan siding. When i washed it i noticed a light coloring of the siding was washing out. 😞. Now there are spots in random spots of the siding. Is there anything i can do to restore it or did i toast and roasted it? Should have washed your video first. Thanks

Hey Ray thanks for the great video and helpful tips. What nozzle do you have on the end of your pressure hose?

Hey man I really like your work , I live in Arkansas, and me and my 13 years son wants to star a power washing business and we need help on what tools we need and what kind of quemicals we need

Sup ray. Live ur vids quick question. Did you use SH for the first house wash to take out the algae?

Have you tried Kracken or Cleansol on a second story? I wonder if it’s as effective from that distance as it is on ground level?

4 year update needed.