Remove & Replace Teeth on a Sickle Bar Mower

Remove & Replace Teeth on a Sickle Bar Mower - Riveted

Рет қаралды 5,762

Жыл бұрын

Quick how to on replacing the cutter sections (teeth) on a Ford 515 sickle bar mower. It should be a very similar approach for any riveted sickle bar section.
If you haven’t removed the knife section from the sickle bar yet then head to the video linked right below where I cover that: • Ford 515 Sickle Bar Mo...
The rivets I used are County Line #5-1/2 (0.211” dia.) x 9/16” long from Tractor Supply Company.
The cutter sections (teeth) are County Line Heavy Gauge Under Serrated Sections, also from Tractor Supply.
Please comment below if you have any requests for videos on other topics for this sickle bar mower, or if you just have something to say or ask!
Thank you for watching!!
#hay #vintagefarm #fordfarming

Пікірлер: 15

@hankscorpio6111 4 ай бұрын

I had a flashback to when I was a kid and had to do this on our farm's swather. We had a tool that would set the rivets. So you'd need the tool and a ratchet. I think we used a hammer and chisel to take the head off and the tool had a piece on one side that would push the old rivet out of the hole

@Buttons_fix_it 4 ай бұрын

Very nice, I've seen a few of those two sided rivet tools. If I ever see a good deal on one I'll like pick it up. Thanks for commenting!

@LynnMorgan-fh2re Жыл бұрын

Over setting your rivets can put your end sections out of time, and hammer shearing section rivets can arc the bar. I would suggest looking into a tool called a SICKLEFIX one ruined bar will pay for one.

@Buttons_fix_it Жыл бұрын

Thank you! I will definitely check that out!

@HustleMuscleGhias 6 ай бұрын

I use a pneumatic rivet gun from Eastwood ( online seller of tools ) that works really well for setting rivets. You'll have to find a rivet set that matches the diameter of the particular rivets you are using. You may be able to pick up a better rivet gun from places that sell aircraft style rivet guns, or even ebay.

@Buttons_fix_it 6 ай бұрын

Thanks for letting me know about this. I hadn't seen a rivet tool like that before. It looks identical to my impact chisel. I'll need to look into this more and see if the bits are the same size! thanks again!

@HustleMuscleGhias 6 ай бұрын

@@Buttons_fix_it Rivet guns may look similar, but have different valving than an impact chisel and run at a faster beats per minute.

@Buffalomm1 Жыл бұрын

Great video. Would heating the rivet help at all or not worth the time?

@Buttons_fix_it Жыл бұрын

Hmm not sure, they're pretty soft. Maybe I'll give it a try next time and see if it makes a noticeable difference!

@victoryfirst2878 Жыл бұрын

I noticed some of the inset teeth have screws instead of rivets. Where the screws a past fix ??

@Buttons_fix_it Жыл бұрын

They must have been, this rivets are formed so nice I'm guessing original? Or someone with a proper tool to form them. Also the screwed on sections are all at the end if I recall correctly, so guess someone hit something in the past. They sell screws so you don't need to use rivets. They were sold out last year so I'll probably just use rivets since I have the big pack.

@victoryfirst2878 Жыл бұрын

@@Buttons_fix_it ONE great thing about rivets is when installed correctly they will never fail. That is a fact from the days of old. Good day vf

@talpalatnyizold 3 ай бұрын

Hi. Under serrated, or over serrated? Which is better? Somebody say this, somebody say that.

@Buttons_fix_it 2 ай бұрын

You are exactly correct that there are many opinions. I don't have enough experience to recommend one over the other. Even with my sickle bar so many minor adjustments change how it cuts (height, speed). Thanks for commenting and good luck!

@talpalatnyizold 2 ай бұрын

@@Buttons_fix_it thanks!