We took the opportunity to film our Norweld canopy removal before hitting a couple of 4x4 tracks tray only. Thanks to the simple design of the canopy and jack legs supplied, it takes all of 10 minutes and 3 simple steps if you have the correct tools at home.
1. Unbolt your canopy
You'll need a 17mm socket and spanner - 3 bolts either side of your canopy underneath the flooring. Make sure you hold onto all components. we recommend dropping the bolts back into the holes once removed for safe keeping.
2. Unplug all wiring
If you've opted for a wiring package, you'll need to remove all connections to your power. Don't forget to unplug any other after market accessories you may have installed to your vehicle e.g. additional solar panels.
3. Install jack legs, wind up canopy, drive away!
Insert your jack legs into the allocated slots in the canopy. Ensure the wind off mechanism is outward facing from your canopy so that you still have access to open and close your canopy doors while it's removed. Wind up the jack legs and ensure the canopy removal is slow and progressive. You want to rotate through each leg evenly until there is enough clearance to drive out!