Removing Anodizing & Polishing Aluminum BMX Hub! (Mirror Finish)

Рет қаралды 58,807

3 жыл бұрын

From anodized black to polished aluminum in just 6 hours! haha
Learning how to remove anodizing and then how to polish aluminum all in one day on a part that will go on my new bmx bike was so rewarding in the end! Seeing the finished product was just awesome.
2021 New BMX Bike Build Playlist - bit.ly/newbmx
If you intend on removing anodizing, I would do some research into a different or better method that could be a bit faster than the 2-3 hours it took with draino drain cleaner.'
But as far as polishing goes, mothers mag and aluminum polish with a microfiber rag are the way to go! They brought a mirror finish to the aluminum and using a drill to spin the hub made light work of it.
Hope you enjoy this one! From the actual process itself to editing the video, I am proud of all of it!!
Thank you for choosing to spend your time watching one of my videos!
If you enjoyed it, let me know in the comments below and if you’re new, please consider subscribing! - bit.ly/Brant_Moore
Join the public Discord - / discord
Just being here is support enough for me, but if you'd like to support the channel directly there are a few ways you can below.
Channel Storefront - moorebmx.myshopify.com/
Become a Member - / @brant_moore
Patreon - / brantmoore
Save 10% on Fit and S&M with the code "BRANT" and make sure to use these links!
Fit Bike Co - fitbikeco.com/?ref=brant
S&M Bikes - www.sandmbikes.com/?ref=brant
Save 15% on the amazing J Walkers Pants and help the channel with the code "BMX" at www.jwalkersapparel.com/?rfsn...
Save 10% on Shadow Riding Gear / Anything from Sparky's with the code "BRANT" at www.sparkysbrands.com/?ref=4o...
Save 25% on CBD products and help the channel by using code "BMX" at www.sagestreettrading.com/ace...
Sponsors - Park Tool, Alienation BMX, S&M Bikes, Fit Bike Co, Brimstone Bicycles, Ride Concepts, Nowear BMX, JWalkers Apparel, Shadow Riding Gear
Audio Only Podcasts/BMX News - anchor.fm/brant-moore
BMX News - bit.ly/bmx-news
BMX For Beginners - bit.ly/bmx-for-beginners
BMX Geometry Basics - bit.ly/bmxgeometrybasics
BMX Tips & Tricks - bit.ly/bmxtips
BMX Brake Guide - bit.ly/bmx-brake-guide
BMX Geometry Explained - bit.ly/bmxgeometry
Talking BMX - bit.ly/talkingbmx
BMX Jams & Events - bit.ly/bmxevents
BMX Games - bit.ly/bmxgames
Rider Spotlight - bit.ly/bmx-spotlight
Lip Lords - bit.ly/liplordsplaylist
Podcast Episodes - bit.ly/bmxpodcast
Trails Series - bit.ly/bmxtrails
New Skatepark Series - bit.ly/spohnranch
If you're local and need bike parts, shop at Brimstone Bicycles in Canal Fulton Ohio!
My Equipment - www.amazon.com/shop/brant_moore
Instagram - / brant_moore
#bmx #DIY #doityourself

Пікірлер: 120

@bmxrider71 3 жыл бұрын

I've done this for a LOT of old skool parts that looked rough before and here's my process... Drano crystals with HOT water. Let it soak until it removes EVERYTHING. Rinse VERY well with water. To polish a hub I'll put it in a fork just like you did but I'll put 4 spokes cut in half through from the inside, pinch then together and put them into a drill. Hold the drill level with the hub and pull the trigger (I set the drill to the lowest speed). Use wet sand paper (I start with 500 grit) to get out imperfections. Repeat with 1000 grit (keep the paper wet). Again with 1500 grit. Clean THOROUGHLY. Then put some polish on a soft cloth and pull the trigger on the drill until it shines like chrome. Wipe with a CLEAN DRY cloth and voila, it's done. This takes about 1-2 hours at most. Feel free to hit me up for any other tips like this. PS - WEAR A MASK PPS - I wrote this before I finished the video 😂😂😂😂

@PinstripeJim 3 жыл бұрын

Sweet. When you do the wet sanding or any sanding, it helps to go one direction with one grit of paper, then cross the sanding grain with the next grit of paper and keep crossing with each finer grain. Not too easy with a hub but flat pieces or with a drill buffer it can be done.

@Brant_Moore 3 жыл бұрын

Tim and Jim’s polishing service. Haha Thanks dudes! I’m getting ready for my next endeavor into part color changing. This one is a little simpler if it will work!

@emilegoguely4032 2 жыл бұрын

Right on, used to bmx and graduate to different projects. Still tinkering and learning about how to polish, helpful tips!

@hawbra56 3 жыл бұрын

Turned out awesome. Its definitely a process. I have used oven cleaner in the past to de-anodize parts. It seemed to be the same amount of work.

@lewishughes3914 3 жыл бұрын

I’ve just polished my revolution hub and I didn’t bother sanding it. Just used oven cleaner and I used the same polish and it came up just as good. I didn’t loose any of the details on the hub it looks 👌🏻

@arthursoto4285 2 жыл бұрын

Dude I ran with your drill idea and polished all the bolts on my bike. Saved so much money and it looks amazing. Thanks for the inspiration

@Brant_Moore 2 жыл бұрын

That's so awesome to hear man!!! Bet it looks goooooood too

@landen1448 Жыл бұрын

I just did this on a bunch of pit bike parts then polished them worked really good

@angelbrooksbmx 6 ай бұрын

Thank you for this video doing this to my stem and seat post right now

@thomasmiller7531 3 жыл бұрын

In my early bmx years I once sanded/polished a black anodized rim to aluminum.. going round the spokes cause I didn’t want to unlace it lol, even if I did it completely wrong, that experience threw me off of any similar endeavors for life. You did a good job, though!

@PinstripeJim 3 жыл бұрын

More than 25 years ago I was a metal polisher professionally. This isn't an easy process and you killed it. I had a 90's GT 24" Cruiser that I stripped and everything but the tires and grips was either chrome plated or polished aluminum. We used a special stripper for paint and anodizing that was very toxic or we just grit wheel sanded the anodizing off. There are not many polishing shops left due to EPA regulations. But, now I am going to strip the anodizing on my stem of my new PK Ripper 27.5" this weekend using this technique. May need to pick up a little buffing wheel for my drill. I'm impressed. That hub looks great.

@Brant_Moore 3 жыл бұрын

Hey thanks man! It’s awesome that people do this at all. Crazy what you can do with a little elbow grease to make your bike YOUR bike!

@melodyfrench9576 3 жыл бұрын

Wow that came out frikken awesome🤘🏻⚡️🤘🏻can’t wait to see the new bike build, yeah 💪🏻

@matthewschick860 6 ай бұрын

I did this on my Eclat Seismic and it worked so well. I wish i could upload photos!

@PissedOffCil 2 жыл бұрын

Amazing! I was looking for a way to get a polished finish for a crank spider for my MTB so it matches the cranks. Looks like this will do it. Thanks!!

@Brant_Moore 2 жыл бұрын

Boom boom, hope it helps you!!

@gsboonedox9883 11 ай бұрын

Dude everytime I go to look up a how to video for BMX, it's always you. 4 or 5 videos now. Just want to say thanks man. Stay cool and stay rad, bro. I'm going to go ahead and subscribe.

@Brant_Moore 11 ай бұрын

Hell yea! I’m stoked I’ve been able to help you!

@JuicyFruityify 2 жыл бұрын

Dude this is me, stripping the anodizing off an old aluminum briefcase....thanks for the pointers ! I'll let you know how it goes.

@russelljennings7822 3 жыл бұрын

Looks like it turned out pretty nice to me! The only advice I'd give you for your next polishing job is to wet sand it with 1000 grit or higher sand paper. It will speed up the hand polishing with the mother's polish but in all very good job👍👍

@mark_spit7839 3 жыл бұрын

So this is the video I've been waiting for, for the last 30 years lol! I have an old VG cable hanger anodized purple that doesn't quite go with a black and blue '87 Haro Master. Thx for the vid!

@PinstripeJim 3 жыл бұрын

I have a Free Agent 24" from around 1992 I'm going to do the same to.

@mike2190 2 жыл бұрын

Nicely done.

@XxLastWinterxX 3 жыл бұрын

Looks great

@zackk695 Жыл бұрын

Great job and you taught me about using the drain cleaner to remove old color. I have some white a bit myself and it’s very tough and not for the light hearted. You best friend is going to be a cloth polishing wheel that connect to drills. They are cheap and get about 5 different wheel sizes. When they are dirty then throw them in the wash with regular dishwashing soap and they are ready to use again. No need to dry them

@Brant_Moore Жыл бұрын

Happy to help and thanks for the tip there! There's also some tips that might help better than drain cleaner in the comments if you look through.

@kilokiloj Жыл бұрын

Thank you so much. That was amazing.

@palikariena7292 Жыл бұрын

Nice video thx. I would recommend eye protection in case of splashes.

@seanstepherson6138 3 жыл бұрын

Looks really good. I forgot to mention earlier this week I had not seen a JP Cycles hoodie or catalog in a long time. Seen yours in the back of your car.

@seanstepherson6138 3 жыл бұрын

On all my show cars and bikes I had I always used Mother's products

@BenJamin-wl8ov 10 ай бұрын

Just started doing this to some rc parts 💪🤘👍

@mambocowboy 3 жыл бұрын

Looks better than the black for sure.

@carlinoheaney4434 3 жыл бұрын

Yeew hub came out awesome 😎 I like new music 🎶 rad

@detroitrcwurks998 Жыл бұрын

Easy off oven cleaner and paint stripper works well also!

@twentytolife4401 3 жыл бұрын

Heads up. In the beginning of some videos you point to the left, but there's no links there. At the end they're there. Hub looks bomb!💣💥

@JJM94 3 жыл бұрын

Use an old tooth brush to speed up the process next time. Took me mins to do my stem 😊

@Brant_Moore 3 жыл бұрын

I feel like that and probably 100 other things would’ve sped this up. Hahaha it took way too long

@liam.ywg_ 2 жыл бұрын

I’ll keep that in mind for my scooter Bars tomorrow!

@RonaldoHere236 2 жыл бұрын

Its works bro..!! but i'am using Autosol for better shining wax. Tq for sharing.

@Brant_Moore 2 жыл бұрын

Awesome!!! Happy to help!!

@Ygliltony 2 жыл бұрын

Killed it

@Cra1g1380y 3 жыл бұрын

Nice.

@seirasiera5182 2 жыл бұрын

You can use it directly without water by using a brush. Just dont let it stay to long. Once the paint remove the wash with water

@Bmxunion 3 жыл бұрын

Nice! Was definitely about to message you asking why you didn't get a drill out to polish it, haha.

@Brant_Moore 3 жыл бұрын

Hahaha I did it literally just to keep you from giving me shit! 😉😉😉

@Gen01Lee 2 жыл бұрын

From what I know the ingredient that’s in drain cleaner and oven cleaner is lye? And that it’s best to buy straight lye and then add water. I haven’t tried this yet but plan to soon.

@dividingdan 3 жыл бұрын

good video bro!

@Brant_Moore 3 жыл бұрын

THank you man!!

@DanielRodriguez-fv5os 2 жыл бұрын

I use the draino full strength

@jeramimachado383 3 жыл бұрын

Hell yes!!!!

@VailSkateSupply1 3 жыл бұрын

I heard oven cleaner will work too. Maybe try it on the rear?

@TheDaltonmichaels 9 ай бұрын

nice, found this video cause i want to strip the anodizing off some of the bolted on parts on my engine. just want nice polished aluminum parts on everything now. dont forget to put some wax or protective coating on that polished part. being a bike it'll probably see moisture and dirt witch will oxidize it over time. i polished my dirtbike wheel hoops once. huge waste of time, but looked killer for a month or so lol. not worth the time though.

@jawertt Жыл бұрын

Hi why you did not use paint remover?

@4321eyeseeyou Жыл бұрын

Hey, I know you did this 2 years ago but I have to tell you, you were making me laugh (with good intentions) because it was trial and error but you did really good, I'm just glad there was nothing to could get caught on or had any sharp edges. Just don't get hurt but hey, you're a rider so you take some risks, be careful. Take it easy and do it right.

@Brant_Moore Жыл бұрын

Hey thanks for not leaning into it too hard. haha If I were to do this today I'd definitely use an oven cleaner to take off the anodizing and figure out a better way to polish the hub. It worked at least and still looks great to this day! haha

@macendy1 4 ай бұрын

Any problems with loose fitting of bearings, since you submerge the whole hub body?

@Cab895 5 ай бұрын

wow!!!

@blakeeaton9870 2 жыл бұрын

Does it go dull after a while ?

@jasonniemier4425 Жыл бұрын

One thing to remember is polished raw aluminum will tarnish it’s the nature of aluminum. Especially in environments when it’s getting wet and subjected to the elements. To prevent this a good quality clearcoat will stop the tarnishing and it will stay mirrored shiny indefinitely.

@raulcabrales9594 3 жыл бұрын

Alianation really made you do all that work when they could have just made it polished from the factory? Lol jokes aside, great job!

@bsimz008 2 жыл бұрын

how is your hub right now? any negative effect so far? I plan on doing the same on my crankset.

@Brant_Moore 2 жыл бұрын

Nothing that I’m aware of. It still looks just like it did at the end of this video

@bsimz008 2 жыл бұрын

@@Brant_Moore Thanks for the update man. I was just a little worried that it might compromise the structural integrity of the part. I plan on doing the same with my crankset.

@pauljames4510 3 жыл бұрын

Don't get any WD40 in the bearing Brant it will mess them up (was rocking out to the music ) 👍🚲💨

@aevan104 2 жыл бұрын

I've always used oven cleaner to remove anodizing. It only takes a couple minutes

@Brant_Moore 2 жыл бұрын

Yeaaaaaa, I kinda forgot about oven cleaner when at the store prepping for this one. Haha

@jdm91hatch 3 жыл бұрын

Would this work with anodized gold you think?

@thomas930409 3 жыл бұрын

yes, as this process dissolves aluminum taking off any anodized color

@jasonmorgan4108 2 жыл бұрын

Use a drill with a slip clutch on the lowest setting to avoid mangling your hand

@Brant_Moore 2 жыл бұрын

Thanks for the tip!

@nowherebrain 2 жыл бұрын

I keep thinking of doing this to some rims, since black rims are simply cheaper...any thoughts/advice?

@Brant_Moore 2 жыл бұрын

Hmmmm. I would try with one before going crazy. But if you’re smart about it and do it the right way it could be viable

@Brant_Moore 2 жыл бұрын

I’ve always found with things like that that it’s usually more work and time than it’s worth. I almost always wish that I had just paid the extra money and been done with it. Haha

@nowherebrain 2 жыл бұрын

@@Brant_Moore well I was going to get one from an old garage sale bike with an old araya rim.. or simply buy the cheapest pinned rim I could find for a test...and I guess I would need a standing buffer...wouldn't make sense to spin the rim(like you did with the hub)..

@nowherebrain 2 жыл бұрын

@@Brant_Moore what...lol, no way..here in germany the black rims knock off about 20-30% of the price compared to a polished or chrome counterpart...cheaper to paint them than to polish them.

@JakeRidesBikez 2 жыл бұрын

now... did the hub end up oxidizing over time and lose that polished look? Also some people in a forum were saying that using strong bases (e.g. drano) on anodized parts can also start attacking the un-anodized aluminum itself and compromise the strength of the part. I would look into that more before building a wheel with that hub!

@Brant_Moore 2 жыл бұрын

Nope it’s still 100% perfect and has had zero issues what so ever

@ZippyLikesZippers 3 жыл бұрын

I always used oven cleaner to strip anodizing.

@Brant_Moore 3 жыл бұрын

Hmmm good to know!

@Bobby_Uterus Жыл бұрын

Works way faster. Works on powder coat too.

@Brant_Moore Жыл бұрын

Wish I would’ve known that first! Haha

@Bobby_Uterus Жыл бұрын

@@Brant_Moore You still got the results you were after. Thats what matters right?

@Brant_Moore Жыл бұрын

I mean, in hind sight, yes definitely. But as usual with a project like this I went in thinking it would only take a few hours..then the anodizing stripping part took all day alone. Haha Should have known that would happen from the start though

@kirkberry2472 Жыл бұрын

Should have used easy off it took off the anodizing from my truss hoop

@indiangamerz4100 3 жыл бұрын

Hi m india m rhata hu. BMX cycle kya melti h

@zackk695 Жыл бұрын

Maybe put drain cleaner directly on the hub

@sw1412 2 жыл бұрын

Easy off works just as well, yellow can

@Brant_Moore 2 жыл бұрын

That’s good info! Hopefully some people see it. Thank you

@1911fortyfiv5 Жыл бұрын

Damn bro I’m proud of you too lol. Thanks for the video now to remove some anodized coating off my aluminum alloy colt frame.

@thetrutha2177 2 жыл бұрын

you could've just bought oven cleaner instead and sprayed it directly on the part and let it sit.

@nyaxz8439 Жыл бұрын

use Natrium hidroksida and Hot Water

@mquevedo0616 5 ай бұрын

How's the hub? I tried a drain cleaner in my radiator, it ate the aluminum away. I had to replace it. 🤓

@Brant_Moore 5 ай бұрын

I'm not riding it anymore but it's still laced up and has nothing wrong with it

@nicolerobinson9429 2 жыл бұрын

Hey, can you confirm you didn't end up using the metal polish?

@Brant_Moore 2 жыл бұрын

No I did

@nicolerobinson9429 2 жыл бұрын

@@Brant_Moore ooooh I didn't see it. I just saw draino, wd40, mother's polish. Whereabouts would I find the part where you used it? So sorry for the fuss! Amazing work though!

@Brant_Moore 2 жыл бұрын

Oh I thought you meant the mothers. I’ll have to watch through this again to remember if I used anything else but of the top of my head I think the mothers was the only thing I used

@nicolerobinson9429 2 жыл бұрын

@@Brant_Moore haha yeah I've watched it three times and couldn't see it and I thought I might be going crazy?! Do you remember why you though you MIGHT use it? I assume you haven't had to repolish or anything yet? Looking to do it on a BB

@DanielRodriguez-fv5os 2 жыл бұрын

Using a terry towel first instead of a microfiber is faster

@Brant_Moore 2 жыл бұрын

Thanks for the tip!! Hopefully someone sees it and is helped!

@natehate5547 2 жыл бұрын

try easy off oven cleaner next time instead of drain cleaner

@NicoFerolino 8 ай бұрын

u need to brush it off. use brush

@superstock9261 3 жыл бұрын

That's not anodised I think, that's powder coating

@Brant_Moore 3 жыл бұрын

It’s definitely anodizing

@eazyevan1 2 ай бұрын

In any process removing Ano or paint always remember that open air is your enemy it dilutes or dry's the chemicals up, use a bag or lid and to results speed up significantly, you're welcome. 😎

@Brant_Moore 2 ай бұрын

Thank you! Good to know for next time

@nowherebrain Жыл бұрын

I watched this before, but why not just buy some sodium hydroxide?

@WishihadaNami Жыл бұрын

I might’ve ruined mine with low grit sandpaper on a belt sander Bedford I watched this video. What an idiot I am

@blameusa7082 10 ай бұрын

use power tools

@unfit-bmx 3 жыл бұрын

You will need to lacquer that bud or it will corrod and go dirty straight away

@PinstripeJim 3 жыл бұрын

No it won't as long as you keep it clean. How do you think aluminum polished car wheels are kept nice? keep them clean and hit with aluminum polish often. The polish acts as a barrier to elements and corrosion.

@davidgee1728 2 жыл бұрын

Lacquer thinner??

@420jacksonian 2 жыл бұрын

to easy to mess up aluminum with the wrong cleaner,much safer to use oven cleaner, reg, not heavy duty ,reg will remove much better, but takes 6 to 10 hrs.the wrong cleaner will also produce a toxic gas , aluminum foil and drain cleaner made with sulfuric acid in a empty 2 litre bottle,cap it shake for 2 seconds and throw, a loud bang equal to a halve stick of dynamite.