No video
Removing Broken studs / Damaged exhaust manifold header nuts Daytona Street Triple 675 - DIY De-Cat
Рет қаралды 1,669
Күн бұрын
@bloodyhell451 Жыл бұрын
Nightmare. I don't know why they don't copper-slip the studs when they put them in.......
@dan_the_drifter321 Жыл бұрын
Ye right, I've found a lot of the fasteners and the sprocket nut ridiculously tight on this bike, think maybe it was stored outside some of its life and the weather got to it. Thanks for watching 👍
@adamparker09 5 ай бұрын
I'm having issue on my 07 daytona 675 sport, never seen bolts so eroded. Was thinking of using grip tight socket set any advice? I mean I can't even get to all the bolts atm so I'm hoping when I take the rad off there will be some form of space
@dan_the_drifter321 5 ай бұрын
Defo more space with the rad off, all I can say is be careful as very easy to snap them, if you can warm then up or grind the nuts off to leave the studs showing that's the best way but sometimes they are just too rusty to do that. Good luck
@parisiot Жыл бұрын
How much louder do you figure it was without the cat?
@dan_the_drifter321 Жыл бұрын
Probably a couple db but I still run the baffle in the can so not too much. I also loaded a different map before I rode it so can't say for sure. Sounds nice though, if you watch my combe or Donington video you can hear what it sounds like 👍
MotorMike
Рет қаралды 1,5 МЛН
J's Garage
Рет қаралды 275
Stephen Cox
Рет қаралды 5 МЛН