Removing My 800-HP Rotary Engine Revealed A BIG PROBLEM I CAN'T FIX (What Should I Do?)

Рет қаралды 942,840

4 жыл бұрын

Thanks to Dollar Shave Club for sponsoring! Go to ►DollarShaveClub.com/tav to get your first starter set for $5! After that, full price products will ship at regular prices!
--------------------------------------------------------------------
Today I take my 800-HP Mazda 3-rotor engine out of my wrecked supercar to put in my Ferrari, and it revealed an issue that I can't fix. At least not easily.
--------------------------------------------------------------------
Subscribe! ►bit.ly/2xZGtYN
Instagram ► / therealtavarish
Tavarish Shirts and Merch! ►bit.ly/shoptavarish
--------------------------------------------------------------------
Questions? Comments? Business inquiries? Email me at asktavarish@gmail.com
--------------------------------------------------------------------
My Equipment:
Teng Tools 715 Piece Mega Master Tool Kit - TCMM715N►amzn.to/2Lp0f4W
Simiron Epoxy Floor Coating►simiron.com
Bendpak Lifts and Equipment►bendpak.com
--------------------------------------------------------------------
Music used in this video:
NIVIRO - You [NCS Release]► • NIVIRO - You | Future ...
Music by Epidemic Sound
Malik Bash - Ghosts [NCS Release]► • Malik Bash - Ghosts [N...

Пікірлер: 1 700

@Redsonny19 4 жыл бұрын

The energy absorbed by that chassis has warped the entire structure. Aluminum memory is not the problem. It is the strength loss of the material once it is bent and corrected. Salvage the reusable components from the SLC and scrap the remainder. The F355 is a tremendous amount of work. Put your time there.

@mikeford963 4 жыл бұрын

Aluminum works hardens very easily. Better off to cut the part out and replace it with new.

@jakeprewitt3009 4 жыл бұрын

I would think buying an SLC kit and just building it from scratch would take less time, be less headache, wind up with a better car, and generate more interesting content.

@Redsonny19 4 жыл бұрын

@@jakeprewitt3009 But then........where is the story in that??

@severedsun3141 4 жыл бұрын

@@jakeprewitt3009 : exactly right

@MiGujack3 4 жыл бұрын

Just focus on the swap and forget this ball of crushed billet.

@nedkogenov5530 4 жыл бұрын

@@Oldsmobile69 worst idea ever

@andrewbowman2976 4 жыл бұрын

Merc Zuckerborg fixing fram damage is one of the hardest things to do and can get super expensive its just not worth it

@1nvisible1 4 жыл бұрын

*Call one of the big laser frame alignment companies and ask them to do a demo with you. Aluminum tricky and doesn't just unfold like steel, but possible. Alternatively there is a master Japanese guy in LA hand building aluminum supercar replicas. He hates publicity but he could fix this in a 48 hrs if it had all suspension etc removed.*

@ichihusni5014 4 жыл бұрын

@Merc Zuckerborg fire damage, not actual crash, and its steel.

@ichihusni5014 4 жыл бұрын

@@Oldsmobile69 hahaha, right?

@Ma77riK 4 жыл бұрын

as a general auto repair technician myself, id recommend letting the kit car go, its done from a safety and logical standpoint.

@Ma77riK 4 жыл бұрын

@@beefchillingham6790 i run a family owned auto body/auto repair shop, its my job to fix the problems you high schooler lube jobers create.

@thatwhichbinds1727 4 жыл бұрын

@@torealintillimdielopz1077 Quiet, Snowflake.

@ekojar3047 3 жыл бұрын

I would save everything that is still fine and Frankenstein it all into something crazy.

@Venom2U 4 жыл бұрын

Last I knew Fran wouldn't sell a chassis by its self. Even if Fran would, with the amount of damage I can see just from the vid you would be better of with a new kit than trying to rebuild this one. Trying to make this one safe would be futile.

@philbertlovely7724 4 жыл бұрын

As cool as the SLC sounded, I think everyone wants to see you go full-steam ahead onto the Ferrari project.

@802Garage 4 жыл бұрын

Rotorrari!!!

@BrownSofaGamer 4 жыл бұрын

802 Garage Triple Rotorrai

@001nuttz 4 жыл бұрын

He can get a new slc rolling chassi for about the price of a new supra. He obviously had an idea for the drive train for it. I think he should go that route.

@Cro-mos 4 жыл бұрын

Toasty?

@noahvelasquez223 4 жыл бұрын

Absolutely

@GearheadDaily 4 жыл бұрын

Having built one myself, this damage might just be too much to save, frankly.

@grizfan16 4 жыл бұрын

You guys that are bitching about the rear frame setup that's all components those can just be replaced the tub is fuckef and that might be some serious work to straighten out. But worst-case you strip the inside cut that out and weld the whole new plate in. big deal all it takes is time!

@curtiswilcock5628 4 жыл бұрын

christopher krause I totally agree this could be saved I have seen worse cars that was crushed basically and been saved so the answer is it can be saved just like you say just a lot of time and hours in this but will be totally worth it 😄

@user-uo1rn2nb8f 4 жыл бұрын

This thing is scrap metal.. sure you could cut out everything that is damaged and replace it which is most of the car but at that point wouldn't it be cheaper and easier to just make another one from scratch? Or another option that actually makes sense imo is finish one of the other projects

@vincebastier9815 4 жыл бұрын

Tavarish: "It's bent, it's bad" Arthur Tussik: "Ahahahahahaha"

@steveosborne4699 4 жыл бұрын

Arthur will sort it haha

@micharoman9188 4 жыл бұрын

... Arthur : Hold my beer

@Damicske 4 жыл бұрын

@@micharoman9188 euhm beer? try vodka

@a914freak 4 жыл бұрын

Tavarish is an amature....Not even in the same league as Tussik!

@vincebastier9815 4 жыл бұрын

@@a914freak Thanks for letting me know, didn't knew it

@itsmejak7888 4 жыл бұрын

Recycle that trashed superlite take the power plant and put it in the Ferrari

@TheSethcoleman 4 жыл бұрын

Chop the 4 corners off of the superlite and use the tub for a simulator.

@misterbuklau4053 4 жыл бұрын

Seth Coleman lmao good idea

@captainzoll3303 4 жыл бұрын

I'd say postpone the SLCountach, and start on the ferrari f355 carbonella.

@supraman2755 4 жыл бұрын

yeess pleasee

@Kekkojoker90 4 жыл бұрын

Italiano? Carbonella is too much italian

@slvr1.618 4 жыл бұрын

Hell yeah!I'm with you on that!

@Off3er 4 жыл бұрын

YES!!

@pez_xsm 4 жыл бұрын

Carbonella 🤣

@esqueue 4 жыл бұрын

Seriously, separate the steel from the aluminum and recycle it. That thing can't be made safe without replacing the entire thing.

@VroomBox42 4 жыл бұрын

esqueue would still make a Great Wall hanger instead of scrap.

@VA-ng2ve 4 жыл бұрын

It can be, anything really can be... with a lot of time, money and effort.

@conner6052 4 жыл бұрын

I love the sped up bits where you see Jared doing a million things and you're always stuck for ages on one bit 😄

@TheModManu 4 жыл бұрын

Throw this thing away. They whole structure is fked.

@BauTekIndustries 4 жыл бұрын

Remove all the steel and clean up all that aluminum and you'll make a killing at the scrappers. RIPieces little Superlite.

@bugi4128 4 жыл бұрын

@@hannestelwin9716 did u see how fuck the frame was the only way that he keeps the car is by buying a new monocock for the car athere wise this will stay as a.shell car like most of the henesys cars😛

@mrbikeman 4 жыл бұрын

Scrap aluminum prices are shite...

@bugi4128 4 жыл бұрын

@@mrbikeman On this video I saw a comment that said sell the sraps and buy a new frame whoever wrote that he is still lives in the 80 when srap actual worth something😂😂

@Mortalomena 4 жыл бұрын

100$ is not worth lol

@mr.merica6048 4 жыл бұрын

@niftertube when we purchase materials from other countries it's not because we don't have it its because we would rather use another countries resources and keep ours for the fut6when its harder to find certain materials

@ralphweber8036 4 жыл бұрын

That frame is toast. I hope we’re alle clear on that. Save as many parts and components as you can but please for the sake of everyone’s good health do not try to rebuild that thing.

@PopllFixit 4 жыл бұрын

With this type of work, the most important thing is to know when to cut your losses...

@IHATECTF 4 жыл бұрын

Scrap it.

@EZ-D-FIANT 4 жыл бұрын

Don't really have frames, they have a center tub with sub frame type things attached to the front and rear! This isn't 60's tech....

@FrequencyOfThought 4 жыл бұрын

It's square aluminum tubing LOL. Do you realize race trucks in NASCAR are rebuilt several times with way worse damage? The way they're designed is to be wrecked and rebuilt.

@renewillard777 4 жыл бұрын

It’s a mono-cockpit with tube style framing. Drift, time attack, nascar, f1, f3, monster trucks, funny cars, jet cars, all use tubing style framework for faster efficient repairs. For as much as a slc cost I’d buy the 2500$ in parts and rebuild. It makes absolutely zero sense in why this is a write off. It isn’t a regular ole Honda street car with Parallel running square steel frame front to back.

@norm302 4 жыл бұрын

Re: damaged car .... Let it go. I wouldn't trust that even if it was repaired well.

@frosty9855 4 жыл бұрын

We all need a Jared in our lives.

@yanoesappletastico8260 4 жыл бұрын

From the creators of “flextape cant fix that”.... “Tavarish cant fix that” xD

@RantzCore 4 жыл бұрын

Freddy can't be a Warranty on that one I'm afraid....

@oncewaslost1982 4 жыл бұрын

Sell the good parts and focus on the Ferrari. Forget about the kitcar

@grantmitchell9034 4 жыл бұрын

Or just keep it and finish the old projects which is what most of us subscribed for way back

@ravisaleh 4 жыл бұрын

Talking of old projects, what happened to Earl Leaker?

@grantmitchell9034 4 жыл бұрын

@@ravisaleh didn't he scrap it to buy a better one

@grantmitchell9034 4 жыл бұрын

@@ravisaleh one that wasn't destroyed by crap mods

@idkwhattoputhere4695 4 жыл бұрын

Yes

@danjones6279 4 жыл бұрын

I love Jared, such a humble respectful guy. Respect, Jared. And Freddie ofc, love you too man. Merry Xmas from the UK, guys.

@JeffLewistennis 4 жыл бұрын

I think the fact that your still doing the blurry, zoom in thing to change angles even after having 1.03M subscribers is testament to how great your content is. Love the video!

@mr-annoyance-4141 4 жыл бұрын

Can you put a clock on the wall so we can see how long it took and we can always snoop at how long you work

@EZ-D-FIANT 4 жыл бұрын

Yea I want this from so many other you tubers too! Theirs a reason they don't do it but frankly I'm not going to explain it as it's simply not good enough a reason, they should....

@B0RRAC0 4 жыл бұрын

Tavarish in the AM???? I can get use to this! 👍🏼🍩☕

@vuiupian 4 жыл бұрын

I couldn’t agree with you more.

@adamlapinski7590 4 жыл бұрын

You guys talk the talk, but walk the walk too. Not only that, but you're just about the only ones on the planet doing stuff like this. Subscribed!

@Pimpmedown 4 жыл бұрын

I AM SO HAPPY when i find so cool storys that already got so far and i donthave to wait too long until the cool stuff happened haha Great project. you guys living/working the dream

@thewilliamss2392 4 жыл бұрын

I'd just strip all the good parts of n just bin the frame it had a hard impact it's not trustworthy

@wakawaka5131 4 жыл бұрын

Tavarish had to find a rotary diamond in the riff raff, so he Went to Jared.😂

@connoisseuroftigolbitts 4 жыл бұрын

Call Mike from Angel Motorsports he’s in Florida right now call him to rebuild the 20B && you’ll never need another rebuild in years!

@juangraveran5733 4 жыл бұрын

Just spotted you driving the murcielago through groveland in front of the publix on us27. Dude that car is amazing in person even though I only saw it a few seconds before you were gone lol. Let me know when you have a meet and I'll be there for sure

@ifgezroxy 4 жыл бұрын

I can hear Rob Dahms heavy breathing already. Respect for the rotary. :)

@bradbozarth1822 4 жыл бұрын

“Where do the Doritos go?”

@sedhendo4177 4 жыл бұрын

Brad Bozarth they go round and round inside dipping in the oil

@bradbozarth1822 4 жыл бұрын

Sed Hendo I know bro, Freddy said that in the video and I thought it was funny.

@plopplop4497 4 жыл бұрын

agree

@YosheetaBoneeta 4 жыл бұрын

3 Doritos are better than 2

@yazansakran3326 4 жыл бұрын

That SLC's crash structures, and tub served their purpose; they protected the occupant. Impressed by RCR's design work.

@lonwillis783 4 жыл бұрын

Merry Christmas Freddie! and HAPPY NEW YEAR!

@justinisdabomb1234 4 жыл бұрын

"so along with you guys, this is my first time looking at the inside of a 3 Rotor..." Rob Dahm: Am i Joke to you?

@BlueTrane2028 4 жыл бұрын

The answer is "yes." Pistons are the way to go.

@TheFiremonkeyman 4 жыл бұрын

honestly, take it apart and scrap the aluminum to recover some of your losses.

@VroomBox42 4 жыл бұрын

It would make a good wall hanger in someone’s shop.

@supafrancis 4 жыл бұрын

Aluminum is less than 50 cents per pound... once everything worth keeping is stripped, how much is really there to be recovered? Not too much...

@VroomBox42 4 жыл бұрын

supafrancis that’s why I thought it would be worth more sold as a wall hanger.

@narx4cancer 4 жыл бұрын

Tavarish: Shows the bend Me: OUCH!!

@frankmaggio4328 4 жыл бұрын

I am enjoying your new side kick. very personable on screen. keep up the good work guys!

@groosbro1 4 жыл бұрын

Write it off, and go on to the next project.

@mytwocoins 4 жыл бұрын

The slow zoom in and out during the time lapse was a nice touch.

@jaylife1530 4 жыл бұрын

You are very knowledgeable and my dad is a mechanic and watching your videos give me good tips on what to use in my car

@milsgarage 4 жыл бұрын

"So where do the Doritos go?" 🤣🤣👍

@garyguiste 4 жыл бұрын

...wait. Did you say “Mazdaratti”? 😆😆😆

@marksanne7565 4 жыл бұрын

Nice one too! I imagined something like "Ferrotor".

@hydorah 4 жыл бұрын

@@marksanne7565 I for one, like that a lot how about 'Ferrorotori'

@lucuix9901 4 жыл бұрын

Just trash that tub. I appreciate all you do but I was really never all about that build anyway.

@crashlag420 4 жыл бұрын

Ngl i got bamboozled by your messenger notification going off lmao i thought it was mine for a sec XD Even exited outa KZfaq just to check lmfao

@jaws978 4 жыл бұрын

very impressed with how well you ride the "longboy" Tavarish. If you finish the 355 before next Christmas I'll be just as impressed.

@BMWORKZ 4 жыл бұрын

Really looking forward seeing how this build will end out. Got some fun parts in the mix - Keep up the good work

@sarthakgoel2627 4 жыл бұрын

Hey waiting for your Bentley vedio. I know it's done and at the moment you are on up for alot of work.

@noahvelasquez223 4 жыл бұрын

I would love to see more on the rotary Ferrari. I can't wait.. you sir are inspiration keep it up!

@HeyCoachTV 4 жыл бұрын

Wrench Everyday + Build it Better = Wrench it Better Everyday! Good luck Tavarish, excited to see where this goes.

@darrennorman8451 4 жыл бұрын

Call Oscar from B is for build and have him fix it 😂🤷‍♂️

@alphatripduce 4 жыл бұрын

Ha its funny because b is for build would just shim everything into alignment

@benjaminkamben4908 4 жыл бұрын

Hell Yeah! That guy is Magic!

@xYIWUx 4 жыл бұрын

and Oscar did a great job!

@DarkRider2k3 4 жыл бұрын

Oscar could fix it. He worked on this kind of material I believe for Chris

@connoisseuroftigolbitts 4 жыл бұрын

dude was born a fabricator with the naked eye 👁

@2006gtobob 4 жыл бұрын

Hit up Art Morrison to let them show off their skills with the frame and tub!

@r1freak1 4 жыл бұрын

Whatever you decide to do, I’ll be here watching and supporting you !

@na28fets 4 жыл бұрын

Hey dude ! New to the channel , love the content. Looking forward a bunch of Awseome builds. Ofcourse I subscribe!

@Allu681 4 жыл бұрын

Give that car to B is for Build and Oscar will fix it 😂

@19chucki74 4 жыл бұрын

I was just thinking the same thing! He worked magic on the Huracan.

@jimjob28 4 жыл бұрын

Great idea.

@jokerman213 4 жыл бұрын

Time to recycle the rest of the car and keep the engine and transmission .

@troylbrown6009 4 жыл бұрын

Do ya'll guys rock! Y'all take junk and turn into magic! Dude y'all inspired me to get back into working on some of the cars that I've had for years now!

@coleriefesel101 4 жыл бұрын

Just saw the murci going south on 75 near lake city! Made my Tampa to Atlanta trip!

@TheAgeofFabulous 4 жыл бұрын

I couldn’t even watch this video because I was going to cry.

@MrKrieger56 4 жыл бұрын

Scrap the SLC. Save what you can and recycle the rest.

@narvul 4 жыл бұрын

Good info on the parts under tension guys!

@stevehansen5389 4 жыл бұрын

I had a Mazda rotary pickup way back in 1976. Put a Racing Beat intake and Holly carb on it along with their recommended headers. It was noisy, fast and could not pass a gas station without pulling hard to the left or right. Rotor tip seals went south just as I was getting ready to move half way across the country. So I bought a German made Mustang V6 engine and transmission oy a yard and a swap kit from some guy in San Diego. Had a flat bed carry it to the muffler shop and waited while they did the job. Drove it home, hooked wp my trailer and hit the interstate. Kept the truck for another four years it layed down one day on my way to work and I had to shoot it. Rotor tip seals were a big problem early on but I am sure that problem has been solved.

@Extrmach 4 жыл бұрын

"So where do the Doritos go?" 🤣🤣🤣🤣

@marksanne7565 4 жыл бұрын

I laughed out loud when Jared commented that he hoped his wife would like him a bit more than Tavarish. You guys are fun to watch. Regarding the wrecked frame: I would put it on ice, not really interested myself, much, much, MUCH more interested to see the Ferrotor coming to life!

@padraigrab08 4 жыл бұрын

Ferrotor best name ever

@mm-vs1zt 4 жыл бұрын

Madd respect to your creation but Ferrotary might work as well...

@fettywhopper7684 4 жыл бұрын

Hey Tavarish, if you do want to do a kit car build, you should buy slc kit sesto elemento. They were used in need for speed and they don’t look too damaged.

@vro1899 4 жыл бұрын

Let the SLC go unless, like you said, they can send you essentially a whole new tub. I love the three rotor idea (it took some time to come to terms with this) and would like to see how it goes together in the Ferrari.

@vadneysean72 4 жыл бұрын

The 2nd wreck that car gets into, if you choose to accept this mission is going to kill someone

@drivenimagecustoms6108 4 жыл бұрын

Ferrari purists are going to go nuts 🤣 Can't wait to see the body work & paint

@Matty.Hill_87 4 жыл бұрын

I imagine most Italian peoples heads exploded when they saw this 🤣

@drivenimagecustoms6108 4 жыл бұрын

@@Matty.Hill_87 lol

@hevigatrider6130 4 жыл бұрын

what is the essence of having a build if you just want to buy stuffs like plug and play, or build it and create something that is one of a kind that you can be proud of once done! its fun to watch a car build that is not just plug and play parts cause many people can do that, but not all builders can actually make something out of nothing!!! go for it!

@harveyweizman 4 жыл бұрын

For the SLC partner up with Vtuned/Rather be welding and repair the tub/Frame. “You will most probably need directed heat on the bottom of the tub where it’s warped to make it Malleable.” Or buy sheet aluminum as thick as the lower tub, cut it to shape, and weld the rest of the frame to it.

@eightsixmotorsports 4 жыл бұрын

I’ve had the pleasure of meeting the old owner of that car. He was a great guy I’ve purchased a autoclutch from him and he even showed me everything about that process. I’m shocked by how small the world really is.

@redgtr 4 жыл бұрын

Tavarish: I can't fix this frame Chris (bisforbuild): hold my beer

@patriotbiker2594 4 жыл бұрын

My favorite car with my favorite engine! Too bad my VA disability would never give me enough to build one. I will live vicariously though you tavarish.

@andrewwilkinson5220 4 жыл бұрын

I’m interested to know how the new engine will be wired to the Ferrari. Do you plan on using the factory instruments etc? Will you need to fabricate a wire harness adapter? I don’t mean the mechanical fitment that can be done with good machining and fab work. But I’m curious to see how the ecu and other electrical components will be connected

@ourlifeinwashington4114 4 жыл бұрын

The exhaust or muffler is in the shape of a rotor. Just noticed that.

@jonlelong 4 жыл бұрын

That was mentioned in the very first video.

@rlhollo83 4 жыл бұрын

And the oil filler cap.

@lovemetal2 4 жыл бұрын

Who else thought that FB ding I. The beginning was theirs lmfao!!

@BaseSRKI 4 жыл бұрын

Cool, it’s shocking to have seen that frame from the bottom😳Thx, really enjoyed the video

@mariustherchilsen9024 4 жыл бұрын

Love your videos. I like when you are building on that car🔥🔥

@alexandrecalderara997 4 жыл бұрын

hi Tavarish i'm french i watch a video of ''rx7 specialities'' and i think i see your car the name of the video is ''REC 3 Rotor SLC Race Car On Track With Mazda Factory 4 Rotor ''

@WhiskyCardinalWes 4 жыл бұрын

That frame is aluminum cans waiting to be made. In the pile!

@bobbymazda4474 4 жыл бұрын

Says the great Vehcor

@randywilliams4325 4 жыл бұрын

Thanks for the how to on Mazda rotor seal inspection .

@felipemendoza3093 4 жыл бұрын

Been watching your videos since you first bought Gallardo. Realized I never subscribed !! Awesome content keep it up

@SBuchan 4 жыл бұрын

I just wanted to say that I really appreciated the Pikachu

@OneBiOzZ 4 жыл бұрын

Weld it back together, strip it down and make a gocart

@JeffSlover 4 жыл бұрын

You should tape off your intake, and exhaust ports. The good news on the chassis is that scrap aluminum should be worth a bit. Not that you will break even, but at least you got more then just the value of the engine/trans.

@mickeymang6 4 жыл бұрын

Hey @tavarish doesn't Porsche have a shorter designed transmission you could use? Plus it could be a good idea to save that current transmission for the crashed car if you can get a replacement frame since you know it would bolt right in. Just a thought. Love your work btw.

@anthonysmz3 4 жыл бұрын

Send it to Vtuned, he'll fix all that frame damage in a 15min video!

@Sotdjuret 4 жыл бұрын

Was just about to write that =P

@edpoell2876 4 жыл бұрын

Aluminum gets crumbly when you try to straighten it back. The next accident you'll be in a soda can caving in around you. Part out what you can and scrap the rest save yourselves the nightmare.

@tdubs161 4 жыл бұрын

Did anybody mention in the last video that that thing sounds like a weed whacker?

@Kyomara1337 4 жыл бұрын

rotaries tend to sound a bit like that at idle and low rpm yea, but at high rpm they sound totally crazy and unlike anything you are used to if you have never really heard one

@kaalin9 4 жыл бұрын

dude i want your weed whacker if it sounds like that!

@georges9686 4 жыл бұрын

Hi Tavarish . I'd like to see both cars done , and the 3 rotor with a big 106 turbo

@adrianhackbro569 4 жыл бұрын

dudeeee, when i see your videos, and watch you work that fast, in like 2 minutes remove the motor, i wish my mechanic, takes that time for checking my cars, best regards !

@gamercoolapple1 4 жыл бұрын

In other words he need us to bother the maker of the car to help him get what he wants

@letsgobubblegum 4 жыл бұрын

take out the ecu, all the gauges, cooling system and that 3 rotor engine and scrap the rest of that car. 3 rotor ferrari is gonna be awesome because so many people are going to be PIIIISSED!

@MrTolgig 4 жыл бұрын

🤣🤣🤣👍🏽💥

@16driver16 4 жыл бұрын

How can you be mad when a totaled Ferrari gets back on the street?

@letsgobubblegum 4 жыл бұрын

@@16driver16 Ferrari purists will find something to be mad about. Always.

@16driver16 4 жыл бұрын

@@letsgobubblegum i think being a Ferrari purist is something to get mad about lol.

@multidimensionaltraveler806 4 жыл бұрын

Jared is awesome. The two of you make a great team

@benjaminmiddaugh2729 4 жыл бұрын

I'd enjoy seeing what you could do with the platform if you can source a new tub.

@uleertel 4 жыл бұрын

Bromance power!😂 Sad for the car but it seems to be trash...

@dion_the_entrepreneur 4 жыл бұрын

Pretty sure “v-tuned” can fab up and repair this Frame damage easily🤔

@DampNoodles 4 жыл бұрын

I really hope you continue with the slc. It looks like I'm in the minority though. And I think putting in a turbo K series or a Ford Barra would be waaaaay more cool than just putting a turbo LS in it.

@daleszydlowski2371 4 жыл бұрын

Bitter sweet, really like the SLC and want to see you rebuild, as I would like to build one one day, but really not into the Lamborghini front.

@themadness6374 4 жыл бұрын

I miss rob dahm in the comment section :( 😂

@hypnotoad9830 4 жыл бұрын

As sad as it is to say, I think it may be time to bring ol' bessy behind the tool shed ....

@SayCheeseM3dia 4 жыл бұрын

I dont know much about structural but i def like to see maybe a dif rcr slc on the road in the guture if u dont go through with this one

@brycel4007 4 жыл бұрын

Hey man ibe been watching the f355 videos since before @hooviesgarage sent the Ferrari to Vehicle Virgins. Even before it got the capristo exhaust plz keep these videos going I really want to see more of the F355