Removing the failed Paccar reman!

Рет қаралды 64,548

western truck and tractor repair

2 жыл бұрын

Pulling the Paccar that was recently installed and made 1 load before small end rod eye bushings came out.

Пікірлер: 292

@davehevner8219 2 жыл бұрын

Spent 20 years as diesel mechanic, decided to watch you instead ! Still miss wrenching but not the BS that went along with it. Great video…keep them coming.

@thomashanke6750 2 жыл бұрын

It’s always nice having a “little” helper around.

@SJC1001 2 жыл бұрын

Really appreciate the effort you put into making these videos Warren, keep it up.

@brianmackey6923 2 жыл бұрын

Same

@vincenthalas7055 Ай бұрын

The joy of an unleashed Warren. Like a cool breeze on a 100⁰ day.

@kwshilts 2 жыл бұрын

I remember when I was working on my pick-up. Our dog would crawl under the truck with me. One of my fondest memories. It gave me a feeling that I did something right with her. I could watch you play with Josie all day.

@williegillie5712 2 жыл бұрын

Warren you and Eric O are my favorite KZfaqrs. His brother works in another shop working on the big rigs. Eric used to work on the big rigs but decided to start his own shop and has become very popular like you. I look forward to seeing yours and his videos when they come out. You both are very knowledgeable mechanics. I hope someday ya both get a chance to meet.

@JCA-Z 2 жыл бұрын

You do such amazing work and you have a wealth of knowledge that in my opinion is unrivaled.

@juddydonk6570 2 жыл бұрын

The amount of knowledge I have gained from Warren and Eric O at SMA, is just amazing. I am grateful for your commitment to sharing what you know. Thank you. It’s not much, but I bought a hat and coffee mug.

@westerntruckandtractorrepa1353 2 жыл бұрын

Thank you.

@mfc4591 2 жыл бұрын

This is just a bit more complicated than removing a vw beetle engine! Thanks for the video, much appreciated

@Seveneleven44 2 жыл бұрын

Anyone that’s done this type of work can appreciate how hard warren works. I don’t miss it one bit. I wish I knew that clutch trick when I worked in the shop. Probably would have saved me some time, swearing and made me more money.

@mattdogg3795 2 жыл бұрын

What clutch trick??

@mattdogg3795 2 жыл бұрын

I see what you're saying lol I didn't make it that far in the video when I said that. I don't mess with pacarr I don't like em. All are truck are 3406e and 3406b 379s

@RenewTheRWandBlue 2 жыл бұрын

No doubt about it. It's tough, often very frustrating work. It is very satisfying to fix something, though.

@Seveneleven44 2 жыл бұрын

@@RenewTheRWandBlue no doubt about it. I loved what I was doing in the shop, but my hands, knees and back didn’t. I got tired of know it all, ignorant people who just don’t know what they don’t see on KZfaq, if you catch my drift. Throw the pandemic parts madness on top of it, and I had enough. Now I’m an overpaid union maintenance mechanic.👍

@richardhoneywell7411 2 жыл бұрын

Great video Warren really enjoy your commentary and watching you disassemble project when they don't last. Josey is a cutie good to have a helper running around and be there with you stay safe Warren.

@Ever443 2 жыл бұрын

Got to love engineer, Making things "better" just screwing up stuff for people to try to repair, or even understand.

@robertoobregon3750 2 жыл бұрын

Think the problem with engineers is that the old engineers used to mentor the young engineers and this does not happen any more. Also the lead engineer used to be someone with 20+ years of experience and this does not happen anymore. Then most things are not engineered to last and be rebuilt. Also designing stuff the designer would go outside and see and talk to the person building it and designing was all manual and the designer really had to thing. With computer aided design most of the thinking is not done and the internet is a big distraction.

@bernardc2553 2 жыл бұрын

Yah & How the hell is this Ham gonna fit into THAT HOLE Christ my wife's hand won't fit either!! Lol

@4321grp 2 жыл бұрын

Warren, I always did the clutch the old fashioned way too, with guide bolts; I never had a clutch jack either, I had to manhandle the clutch. Now you tell me, after I'm already retired!

@thomasstewart9368 2 жыл бұрын

Morning Warren. l used to air them trucks up from that #4 line at the air govenor. l used to leave the clutch in the transmission to. Worked good for me. 👍

@stephenhoran7597 2 жыл бұрын

Brilliant Warren say it how it is no holding back. I absoulaty love it

@chadbork7489 2 жыл бұрын

Blue noses are the best dogs ever. Such unconditional love, and lots of personality!

@scruffy6151 2 жыл бұрын

Good to see that off road forklift is working out to be a good investment.

@37903eral 2 жыл бұрын

Your comments on the pacar engine are spot on. Saw one at the Louisville truck show,I said then it was a turd. Years later it's still a turd.

@greglammers9905 2 жыл бұрын

You hit the nail on the head Warren, they’ve totally f&$ked it up. What was wrong with the old Bendix AD-9 it was simple and effective. All theses stupid dryers now are so complex but you can just spin the dryer part off, but you still have to take it apart to clean it all out. Something you do annually,( or should do annually) . I thought all these terrible Navistar engines were bad, but it looks like Paccar said “ hold my beer watch this” what a bunch of crap

@dharmi44 2 жыл бұрын

my diesel only runs on Cummins.......

@anthony1636 2 жыл бұрын

Sometimes an opinion can be justified. Other times its a crock of shit. Paccar are the second biggest heavy Truck Manufacturer in the States. And the third Largest Globally not bad for a bunch of crap wouldn't you say.

@greglammers9905 2 жыл бұрын

@@anthony1636 I have no issue with Paccar the truck, it’s when they decided to build engines that I have a problem. They are way over engineered, IMO. Then add in the government emissions mandate and you have recipe for disaster. Even the companies that their bread and butter is engines, I.e. Detroit diesel, and Cummins have problems. There’s a reason Caterpillar got out of the truck engine market, and international AKA navistar started offering Cummins engines in there buses and medium duty trucks. Their engines were a disaster. The company I worked as a technician for 40+ years quit buying international buses in 2010 because we were having so many issues with the navistar engine. We only started buying them again when they offered the ISB Cummins engines in their buses. ( 2015 I believe) we had no problem with international the truck. And when you sell your own engine you can offer it cheaper and that’s what a lot of bean counters buying buses and trucks look at unfortunately, because they usually only keep there stuff till the warranty runs out, it’s when the next guy buys it and it falls apart and ends up being a nightmare.

@byronexley6829 2 жыл бұрын

@@anthony1636 Nope not bad as a chassis builder. However, a lot can be said about their engine building technology. You must be very young. On the other hand myself being an old retired tech, PAC-CAR still needs to learn how to build a reliable engine and Tranny

@tomgarner553 2 жыл бұрын

Just hook shop air up to the red air line and push valve on dash. It’ll fill the primary tank and allow you to release the breaks.

@brucemackinnon3340 2 жыл бұрын

Another great video Warren,thanks again for sharing your knowledge with us keep up the great work it doesn't go unnoticed

@douglasmayherjr.5733 2 жыл бұрын

Thanks for the videos, Warren. Always a treat. The puppy is definitely going to be a good one.

@hoangpham4468 2 жыл бұрын

My auto mechanic friend, he’s shop owner, he’s the best mechanic in town, ton of customer wait in line, but he worked alone, no mechanics can work with him more than month because he wants the job done perfect.

@matkremzar5474 2 жыл бұрын

soapy bubbles

@Mr3765 2 жыл бұрын

Bad part is even if paccar warranties the engine they won’t pay your labor. Good luck my friend .

@deborahwebb3598 2 жыл бұрын

Sir, you are one hard working man.

@philglover2973 2 жыл бұрын

Thanks for your time and consideration in making this video Warren very informative 🤠👍🤠🇬🇧🇺🇸

@marklowe330 2 жыл бұрын

Keep the videos coming. I enjoy all of them.

@calebbadenhop4003 2 жыл бұрын

Really appreciate your videos, especially anything on an ISX, I just started a new job taking care of a fleet of T680s and a few videos have came in handy.

@Prariedog 2 жыл бұрын

What a job eh . Bet you will be glad to see this unit leaving the shop. Thanks for sharing Keep up the great work

@owenwilliamfritts2271 2 жыл бұрын

Man I burn so many hours watching you work when I’ve got an IH4600 sitting right outside needing a clutch, carrier bearing and rear rotors but nooooo: I’m watchin’ you 😂

@garybulwinkle82 2 жыл бұрын

It's called "procrastination"!

@adamtheede2575 2 жыл бұрын

Your studying hahaha

@edwardschuck6986 2 жыл бұрын

I don't pull off the pto because I made the shanny jack plate to go around the pto...Saves a LOT of time...I agree with unbolting the pressure plate from the flywheel....love your videos

@stuartlockwood9645 2 жыл бұрын

Hi Warren, looks like there might be a full Paccar engine coming,? If so, let's hope it's a good one, for you and the customer, when Josie came under the truck,and lay on ya, that was a great moment for me, she sure is cute. Thanks for another interesting video mate, stay safe, best wishe's to you and your's, Stuart UK.

@grahamvowles129 2 жыл бұрын

Warren been a diesel and ag engineer for 42 years now and still working but don’t dis the Scania v8 engine best v8 truck engine ever manufactured it’s a legend. Love what you do man but there is life outside the good ole USA.

@garysoykin2783 2 жыл бұрын

It may be wasted time but it shows that you do nice work it’s a good feeling keep up the good work my friend

@patreilly2445 2 жыл бұрын

It is so sad and disappointing to see you pulling this POS back apart after putting so much time into it the last time. Bad enough the old engine failed with a broken crankshaft way before its time but the remaned engine failed because either they did not use assembly lube on the wrist pin bushings or the installed the bushings wrong. When I did rod bushings I used to make sure the oil galleries would blow air through them and if you could see the oil hole lined up. I was burned once on a new connecting rod that had a blockage in the internal oil gallery from the factory casting. The oil gallery was not all the way through to the wrist pin bushing and the engine lasted about 15 minutes before that piston and cylinder grenaded on the test run. Good thing I was working in a factory shop because after the cause of the failure was found on the tear down I was no longer the goat. After that I always blew through the oil galleries before putting them together.

@PoliticalGangster 2 жыл бұрын

why called you a farm animal to insult you. it wasn't even your fault.

@patreilly2445 2 жыл бұрын

@@PoliticalGangster Well the foreman was on me for screwing up this overhaul and we were on the hook for the damage. So it was going to be a free one for the customer. Head office did not cover their screw up our shop had to eat the bill for the second overhaul. When we found the defective part on the tear down there was not much the foreman could do about it because we did about 50 to 60 in frames a year and that was the first time we had seen something like that.

@jonlowe8727 2 жыл бұрын

Top content as always mate 👍 thanks for taking the time

@tommybickerstaff1249 2 жыл бұрын

Warren u do more before breakfast than most folks do all day.

@robertwinton2649 2 жыл бұрын

The close contact you have with your puppy dog right there under the vehicle is the reason why I named my puppy dog grease rag every time I needed to wipe my hands on something I just knew she'd love affection and we both got what we wanted I love it keep up the good work and give that puppy dog a bonus

@scrotiemcboogerballs1981 2 жыл бұрын

That is a wonderful trick for putting the engine clutch together wow I helped change a engine once and we fought that thing for way too long lol thanks for sharing buddy

@johnturner8829 2 жыл бұрын

I like the mention of Erik O at South Main Auto. He is literally one of the best guys on here.

@lilo2469 2 жыл бұрын

One of da BEST!

@dcmkcbbq 2 жыл бұрын

Every time I see someone using a crescent wrench, I hear my Grandfather saying, "you know we have the right size wrench for that. "

@matkremzar5474 2 жыл бұрын

adjustbles are fine if used right

@lucianracu9975 2 жыл бұрын

Have a nice weekend Warren thanks for all the videos...

@HUBBABUBBADOOPYDOOP 2 жыл бұрын

*23:27* The word *shit* was actually an Acronym from Old Colonial Settlements. It was stamped in bright yellowish red capital letters, on the Hold doors on Merchant ships, ferrying goods & people up & down the East coast, that carried substantial amounts of cow, pig, chicken & horse manures for Farmer's various crops. They discovered the hard lessons of deadly spontaneous combustion, when cargo like this would suddenly explode with great force. The *_Acronym_* SHIT stood for Stow High In Top (of cargo load) so methane wouldn't collect inside the Hold.

@dh-_1011 2 жыл бұрын

I’ve always read that it was an acronym for: Ship High In Transit So it didn’t get wet in the cargo hold.

@HUBBABUBBADOOPYDOOP 2 жыл бұрын

@@dh-_1011 Nope. Ever see a pile of oily rags self combust before? Same concept. Ever see an OSHA approved "Oily rag bin"? It's yellow, red letters, metal, insulated, automatic closing lid, foot operated. Manures are the same way. Never store or stowe down in a hold (confined area).

@dh-_1011 2 жыл бұрын

@@HUBBABUBBADOOPYDOOP Copy! I love that. Thanks for the info. I love it! I knew it couldn’t be that simple.

@CrimeVid 2 жыл бұрын

That is such bullshit ! the word is probably from early Germanic and over two thousand years old !!

@billmoran3219 2 жыл бұрын

Most peterbilts have a remote line/ fitting a front if truck to air up. Those new bendix air driers have the check valves built into drier manifold and are pressure regulated so you may have to try and slowly induce air into the system. You notice in a regular situation with truck running it will air up one air tank and not start to air the other unit tank taking air goes over 100 psi then it will start to fill other tanks. It all draws back to those new type air driers and how the tanks are plumbed to that check valve manifold on drier.

@subzeromjc 2 жыл бұрын

Yeah I heard it take a little air then stopped. Good i info Bill thanks!

@henrysosebee9241 2 жыл бұрын

Good luck 👍 I don’t miss working on the big rig

@tracywhitaker2380 2 жыл бұрын

You can tap into the port on the dryer that the safety blow off valve is in , that should air both sides up and will hold air when you remove your fittings , at least that’s what we do sometimes when prepping to be towed

@danokerr9929 2 жыл бұрын

Those paccar engines are quite the mess. Those coolant lines behind the head on the back of the block constantly leaking. The water manifolds on the right side of the trucks constantly rotted out. The constant leaks. The water pumps failing all the time. They are terrible

@ScottWarder Жыл бұрын

A great tow truck driver once told me to install a 1/4" air fitting with ball valve and male quick connect on the tank under the drivers seat. That way you can purge the moisture easily and also air up the system using outside air if you need to as well...

@alfonsobernabe4291 2 жыл бұрын

By far top 10 KZfaq channel coming from a guy that had the KZfaq subscription thing

@derektroost6980 2 жыл бұрын

First job i had as a HD mechanic was a clutch job on a western star back in 1998. Glad I learned back then to leave the clutch on the input shaft. Trans was a bear becuase the rear mounts were on tranny case so the engine needed to be supported.

@k4x4map46 2 жыл бұрын

totally agree!! I stumbled upon your leave the clutch in method on my nissan sentra during her engine removal lol works great!

@mattdogg3795 2 жыл бұрын

Love your videos Warren!! The people that nag about your work are the people nobody wants to work with because they can't "stfu" and do "there job" I've worked with people like that and hated that just because I do something different doesn't mean it's wrong. I do good work when I work by myself because I love the job!

@twistin140 2 жыл бұрын

thanks for the share warren. love the videos..... keep em coming.

@brianmadden6080 2 жыл бұрын

We had to haul a lot of Pete's to auction and we found that newer petes have a safety valve that won't let the air flow through the dryer.you can hook to the rear tank and it would usually back feed to the rest once it got over 110psi.

@badmonkey3669 2 жыл бұрын

Next time get you a extra glad hand and hook it up to the trailer supply glad hand on the back of the truck and put your valve on that extra glad hand and air the truck up that way you will have to push the trailer park brake in to work

@DaveImagery 2 жыл бұрын

Another great vid, thank you Warren! And Josie is so cute I can't stand it! More Josie!!!

@elroyelblander6277 2 жыл бұрын

👍👍...right on feller.. you're the best there is man👍👊

@patriot2164 2 жыл бұрын

Yeah , Like South Main Auto channel , learned alot from Eric , Ivan , Keith D ! Here too ! Thanks for Sharing Warren

@phillipthebigj8971 2 жыл бұрын

Love the vids Warren looking forward to the next👍

@donaldgibson2050 2 жыл бұрын

Another interesting and educational video. As for Eric over at SMA, considering his wife works in the office and his kids spend a lot of time there I can understand him watching his language, little ears hear everything.

@grumpyg9350 2 жыл бұрын

Amazing work!!!!👍👍👍👏🏻👏🏻👏🏻

@xavierperez880 2 жыл бұрын

I was just as shocked when that shop air going directly to the air dryer didn’t fill up the tractor, and equally pissed off

@coltengangwer8694 2 жыл бұрын

That’s the same way I pull the engine away from the trans, put the caging bolts back in and leave the clutch in place . Pulled those paccars a lot of times at the dealer to replace failed camshafts

@amunderdog 2 жыл бұрын

How does warren do this everyday, all alone, In less than ideal conditions. You can see the years taking a toll.

@subzeromjc 2 жыл бұрын

The Dude’s an animal at this. I think he likes the camera for someone to talk to.

@matthewhansen5008 2 жыл бұрын

Some trucks have an air up valve like is on a tire valve stem on the air governor.

@theratedrtransformer8890 2 жыл бұрын

I work at a kw dealership,one way to get the truck to air up is grab the red glad hand and connect another one either coming from another truck or just one connected to and air hose and press the red valve on the dash and itll air up the brakes,works on petes and kw trucks

@kennyschnare4971 2 жыл бұрын

i have found that by taken the safety valve out and supplying shop air it will charge both tanks and it is also how to bypass the dryer when it is frozen

@tonychandler8908 2 жыл бұрын

Brother I love your videos because you tell it like it is

@petewilliams7425 2 жыл бұрын

That sure is a nice looking little pup you got there.

@edwardboyd9996 2 жыл бұрын

I was watching a video on Paccar engines and they said they are designed to last 1 million miles. I don't think I have ever seen one last anywhere near that long.

@jamesjournell867 2 жыл бұрын

I can't even explain just how many times you made me laugh during this video 🤣!!!

@richardstrong1946 2 жыл бұрын

Nice job Warren..keep it up.!

@calumanderson5617 2 жыл бұрын

Thank you for the video Warren, Josey is sure is getting to be a mighty fine big girl. 👍

@alfonsobernabe4291 2 жыл бұрын

Dude that dog is super cute

@jameshood3692 2 жыл бұрын

just FYI there's a fitting that goes through the frame on the drivers side about inline where the oil neck is on the mx engine on almost all Pete's and kws made in the last like 7 years or so that you can use to air the truck up manually

@neilhansen9886 2 жыл бұрын

Love the video content mate. From an old X coal miner in Australia

@graburbozak3120 2 жыл бұрын

I'll be here all week.

@phillipmckinney7906 2 жыл бұрын

I could watch what you do for many years and still be lost ...as you are a fkn pro at what you do as ur brain works like a Battle ship captain as always a step ahead of the game FK yea...and that is one cool gray pup ya have there and wish ya best of luck with that baby Pit as they are the best with the right owners and im sure ur are that owner as i have a big baby Rot

@PTBob721 2 жыл бұрын

As always, thanks for sharing such great information and for patiently training your dog to be a good helper! Would that trick with keeping the clutch assembly on the pilot shaft work with something a bit smaller like an NV4500 install on a Dodge Ram Cummins?

@maytagmark2171 2 жыл бұрын

You ain't got enough junk in your shop! LOL Looks like a working mans shop with lots to do. Have a great week.

@snowrider004 2 жыл бұрын

I have had luck back filling through the red glad hand. just hook up shop air to your red glad hand and release the trailer brakes. It will fill your main tank. not your 2nd tank tho. but you can still get it in the shop.

@mwhitelaw8569 2 жыл бұрын

Any driver worth his salt has already put a female coupler on one of the tanks. PDI has a 50 state compliant tuner for emission trucks. I've used it Very simple Even with QSX coding it makes massive differences. I get crazy mileage man, you wouldn't believe it. Like double digit And I'm up here going across 90 gettin 13mpg

@lilo2469 2 жыл бұрын

In ont the MTO don’t like to see them in the air tanks I’m jus sayin

@mwhitelaw8569 2 жыл бұрын

@@lilo2469 I can understand the reasoning though. ....covered in ice , it fails causing a lockup at precisely the wrong moment. It's why I only use them in a pinch

@blake9361 2 жыл бұрын

good vid warren

@jdboy9 2 жыл бұрын

Not a Guaranteed fix but worth a try. It helped with some of my cordless stuff. Deoxit the connections on the tool and batteries. I've also sanded or filed the connections when they get fried.

@lyfestile7997 2 жыл бұрын

I put a glad hand on the trailer parking side connected to a compressor. Hold the trailer release until you have enough air then disconnect

@gasperajdnik5627 2 жыл бұрын

Good video 👍

@raycollington4310 2 жыл бұрын

What a lovely moment when the crew turned up to help with the transmission, very funny. Good luck Warren. I still can't believe how major corporations churn out bodged remanufactured parts. Surely the cost of this debacle is born by the joke of the machine shop idiot who screwed up the rod bushings. Paccar chose to use this company. no wonder their reputation is toast.

@davidj4662 2 жыл бұрын

As long as the shareholders make money and they have a monopoly they don't really care. You got no choice.

@graburbozak3120 2 жыл бұрын

Paccar Song chorus: "If you're expectin a mile for each liter", "Toss out the Paccar and put a Cat in your Peter" . The rest'll come to me.

@anthony1636 2 жыл бұрын

Watching you. I Know why I gave working as a technician. Everyday is a bunch of stress, putting right what others had not done correctly. Laying on the deck under a semi is a bunch of S**t with oil and crap dropping on you at every opportunity. Soooooo much easier just being a wheel jockey.

@jb98331 2 жыл бұрын

got a friend/customer that says "my worst days I see you but that is your every day"

@poolguy101 2 жыл бұрын

Pro tip. Close the valve when threading it.handle is out of the way. Happy wrenching.

@lindenhawthorn4761 2 жыл бұрын

What I usually do if I can't take the discharge line off is I put a 1/8 pipe thread schrader valve I get from the auto parts store in the extra res port of the governor. Bendix should almost just start including one when you get a new governor.

@davidholder3207 2 жыл бұрын

When you started raising the truck using compressor air to the suspension bags a bit of your US Navy life came through Warren - "Give 'er some air and up she rises" was the shanty ringing in my head!!

@mongomay1 2 жыл бұрын

Thanks Warren

@kw900lkevin 2 жыл бұрын

Air dryer is marked defective it says TRP right on it

@buddyrich3875 2 жыл бұрын

Its amazing what they design is totally unrepairable. Undying Spirit is incredable

@brianhilligoss 2 жыл бұрын

Airing it up the hard way. have a gladhand on your shop air. connect it to the supply line and push and hold the parking valve in. will backfeed.

@brockwaymt 2 жыл бұрын

Do newer trucks no longer let you hook air to the red line and hold the trailer brake button in?

@billtodd6509 2 жыл бұрын

I have a fitting made that connects to line coming off the head of compressor(at compressor)and connect shop air to it. Wheaties needs to put a paccar engine on their box and print breakfast of champions. I would be looking for a good ix core for you to build for him if the poor guy has any money left.