Removing The Flooring In A Shipping Container

Removing The Flooring In A Shipping Container - Debunking The Toxic Myths

Рет қаралды 67,928

Күн бұрын

Do you know what's required to remove the entire floor from a shipping container? Did you know of the many myths going around that the floor is toxic and not safe to remove.
In this video Channing is going to demonstrate a new way of removing the floor out of a container a way that doesn't require heavy equipment.
Stay tuned for the end where Channing goes into detail of the misinformation on the toxic chemicals in the floor boards.
If you enjoy this video please do us a favor and give it a like. If you'd like to see more, please subscribe to our channel and ring that bell for notifications.
Hope Ya learned somethin!
Toxicological Evaluation of Four wood Treating Products Study☣⬇
thecontainerguy.ca/container-...
Timestamps:
0:00 Intro
0:45 Chapter 1 Ways To Remove
2:38 Chapter 2 Removing Screws
6:57 Chapter 3 Removing Floor Boards
12:55 Chapter 4 The Underside
17:32 Outro
FOLLOW US ON OTHER CHANNELS 👇
➡️ Facebook: / thecontainer. .
➡️ Instagram: / the_contain. .
➡️ Merch Store: thecontainerguy.myspreadshop.ca/
🛒 ＳＨＯＰＯＮＡＭＡＺＯＮ
||CANADA || USA ||
Container Modification World's Products:
ＷＩＮＤＯＷ F R A M I N G ＫＩＴ S：
NEW 42" x 30" Side Wall & 48" x 30" End Wall (Amazon Canada):
amzn.to/3OxeeIm
NEW 42" x 30" Side Wall & 48" x 30" End Wall (Amazon USA):
amzn.to/479F54v
**Sidewall Window Frame (36"w X 30"h) (Amazon Canada): amzn.to/3Vn7QDR
**Sidewall Window Frame (36"w X 36"h) (Amazon Canada): amzn.to/3i9g9F4
**Sidewall Window Frame (48"w X 30"h) (Amazon Canada): amzn.to/3XsmL1r
**Sidewall Window Frame (48"w X 36"h) (Amazon Canada): amzn.to/3AGU4UK
**End Wall Window Frame (40"w X 30"h) (Amazon Canada): amzn.to/3U5ca9X
**End Wall Window Frame (60"w X 30"h) (Amazon Canada): amzn.to/3EWSm4g
**End Wall Window Frame (60"w X 36"h) (Amazon Canada): amzn.to/3VJW5ID
**Sidewall Window Frame (36"w X 30"h) (Amazon USA): amzn.to/3CClStJ
**Sidewall Window Frame (36"w X 36"h) (Amazon USA): amzn.to/3g8wk4G
**Sidewall Window Frame (48"w X 30"h) (Amazon USA): amzn.to/3sfFsax
**Sidewall Window Frame (48"w X 36"h) (Amazon USA): amzn.to/3rXi7tL
**End Wall Window Frame (40"w X 30"h) (Amazon USA): amzn.to/3CsDyrq
**End Wall Window Frame (60"w X 30"h) (Amazon USA): amzn.to/3MvA2Bq
**End Wall Window Frame (60"w X 36"h) (Amazon USA): amzn.to/3CDq8ci
ＶＥＮＴＩＬＡＴＩＯＮ
Big Air 45 Vents:
**Big Air 45 Vent (Amazon Canada): amzn.to/3wCAirk
**Big Air 45 Vent (Amazon USA): amzn.to/3AvmsZ7
ＳＥＣＵＲＩＴＹ
Lock Box:
**Bolt-On Lock Box (Amazon Canada): amzn.to/3AV1V1u
**Bolt-On Lock Box (Amazon USA): amzn.to/40QCrNm
----✪✪✪----
Check out CMW's website: containermodificationworld.com/
www.tcg.ca
At The Container Guy, we are constantly developing new products and engineering practices. We know how to convert sea containers without compromising the integrity of the structure. This channel will take you along as we convert Conex boxes for our clients and show you the proper way to install accessories.
We also hope to provide the shipping container home and tiny home following great tips on how to modify sea cans properly so you don't make the same mistakes I have!
Our company is based in Saskatoon, Saskatchewan, Canada. Although we cannot modify shipping containers for everyone, our available products can be sent anywhere in North America. These products and designs are forever changing. Be sure to check our website to keep up to date on the most recent versions.
**As an Amazon Associate, we earn from qualifying purchases.

Пікірлер: 113

@MindZye Жыл бұрын

I've been eating container flooring for years, and I'm fine!

@IvoryS2012 9 ай бұрын

🤣😂

@lorrainedinsmore1307 6 ай бұрын

Ha ha ha...everything is toxic according to the gurus....

@zurialjazz Жыл бұрын

I use a HiLift Jack to raise the container or lift a corner.

@robertroberts5218 Жыл бұрын

Myths are bad. Thank you for fixing that. You made floor removal easy.

@MyMy-tv7fd Жыл бұрын

I love these vidz, but I did not expect to get a good laugh at the end out of 'do not eat your floor boards' - bonus ball!

@thinkoutsidethecontainer Жыл бұрын

Interesting to finally see a study done on the alleged toxicity of the container floors. I epoxy sealed my entire container home's floor because of the claims that pesticides used ln the floorboards could off gas toxicity.

@PhillipCarswell 5 ай бұрын

Ditto, I was told that the manifest sheet on the side of the container tells you what chemiclas were used in the container to prevent pests and rodents so I had planned on removing all of my floors. I had my first container floor epoxied as well but now I'm glad to find out that I don't have to remove the flooring of my other containers.

@terryqueen3233 Жыл бұрын

Thanks for destroying that myth. Well that went a whole lot better than I expected it to, good job!

@1000YearHomes Жыл бұрын

I was happy to see the plywood isn't listed as toxic. However, my containers were used for tires and tractor parts. Without sealing the odor of oil and rubber is pronounced. So, the initial plywood might be 'okay' but many are chemically treated for insects. So, the same reason I don't direct contact pressure treated lumber, I would not direct contact shipping container plywood. I intend to paint with Kilz then skim coat the plywood and tile.

@alanmcrae8594 Жыл бұрын

Definitely the best source for container mod information on the internet. Wish you were here in the mountains of Virginia.

@TheContainerGuyTV Жыл бұрын

Wow, thanks!

@kindnesscounts7748 Жыл бұрын

Ive worked in and around containers for years and I have owned 2. If you intend to live in or store soft goods in one you should have a plan for mitigating the "toxic" smell/ oder, because it will permeate whatever you store in it. If you store soft goods like cloths and dont have them sealed and protected they will end up smelling like the floor of a container. I like the bamboo floors as they dont have an oder like the chemicaly treated floors. Posibly because they have a polyurethane seal on top. Just my 2 cents.

@OmmerSyssel 10 ай бұрын

Iived permanently +5 years in these boxes, new and very old one. Never had any issues, except for moisture which is handled efficiently by Meaco dehumidifier.

@bettyolis6228 Жыл бұрын

Great stuff guys‼️

@RetreatHacker 8 ай бұрын

Thanks for posting about the myth!

@laidbacktraveler2580 Жыл бұрын

Excellent vid and info as per usual. Thank you for posting this up! I wish you were located closer to the 808.

@noahautumn7611 Ай бұрын

Good idea 💡

@rbletitgo4948 Жыл бұрын

I really enjoy your information that will be helpful for me not to learn the hard way. I am still living in my car but saving my money to be in a better place in another year when my daughter moves over. The floor has been an issue in some of our ideas for a layout with joining 3 side by side. Thinking of a raised floor on the middle section.

@OmmerSyssel 10 ай бұрын

I recommend High Cube if possible, the extra height makes a huge difference. Don't weld any fixture for framing/plating! Just make an wooden H shaped construction and hold it place with the top beams. We made hundreds of these insulated constructions... Insane what extra work even professionals are wasting on that widespread basic misconception!

@thomaswhisnant6573 Жыл бұрын

I really enjoy your videos!!

@akalivers 10 ай бұрын

I like your videos. You do a good job at it and you have a great personality for communicating with viewers. I must say though I find your hardware prices strikingly high relative to the same or similar items available elsewhere on the internet. If you can continue to sell hardware at more than twice the price of others, I guess it's all good, at least for you all.

@YUHJKT Ай бұрын

Excellent video. If you position that ring toward the corner and ratcheted it up it might pop it up easier. Then get yourself a Burke Bar. Best pry bar known to man. Once you pop a corner up with a 1/4" gap that Burke Bar will do the rest.

@TheContainerGuyTV Ай бұрын

Yeah after watching it, we definitely realized there are better ways. We weren't expecting it to work.. just an experiment that ended up working

@eastvantony Жыл бұрын

nice thanks!

@weeweed86 7 ай бұрын

Thank You.....

@onederment 11 ай бұрын

Just subscribed. I have seen a couple of your videos and I think you are doing something great

@TheContainerGuyTV 11 ай бұрын

Thank you very much

@onederment 11 ай бұрын

The floor looks good as a hempcrete guide. I reckon you could put hempcrete in the container and put tiles down for hot environments And use those floor boards as for wall guides extending the building

@OmmerSyssel 10 ай бұрын

We repair hundreds of shipping containers yearly, including smashed flooring. Never had any issues lifting these boards or exchanging parts of destroyed flooring. Suits evenly... Eventually drill new holes and remember to seal efficiently.

@Jh-yi8gc Жыл бұрын

Thanks for busting the myth. Can you go over the different and easiest interior diy wall for a container home? Aside from dry wall. Thanks

@TheContainerGuyTV Жыл бұрын

The PVC wall panels that we use all the time are for people who don't know how to drywall. Screw them on and you're done. Already white.. no mudding, no taping, no sanding, no painting.. waterproof finish. Can't ask for more than that.

@TysonCapel23 26 күн бұрын

Keep in mind that on these floors on the centerpieces and on the edges they router down a section from front to back about 1/16th to 1/8 of an inch thick on the bottom of the panels so they will sit flush. On the edges underneath the floor and in the center there is about a 1/8 inch thick piece of flat strap metal going from front to back and in order for the panel to sit fully flush the plywood panels on the bottom are routered down.

@F-Bomb313 Жыл бұрын

another great vid, thanks for sharing. Instead of the ratchet straps, you could just put the d rings on each side, then two guys with big crowbars or pips stick them inside d rings and use it like a fulcrum to lift up the piece of wood?

@ahmadse7189 Жыл бұрын

عمل جميل شكرا لك

@dmmflys Жыл бұрын

Always wondered what it looked like underneath the floor

@OmmerSyssel 10 ай бұрын

Ask the local rats and mice..

@curtwarkentin2887 7 ай бұрын

I missed it in your video. Are those floor joists I beams or C channels? 1 of my sea cans mice are coming through the floor at my farm. I was thinking of removing the plywood and cutting it into strips to drop into the bottom of the I beams and silicone around them to seal up then start filling the channels with quikrete. I seriously doubt mice will chew through that much steel and concrete to get in again. But if its C channel I'll need to secure one side of the plywood with screws through the channel. Overall a great video. It is hugely helpful to see how to remove that flooring.❤

@1965jghoward 4 ай бұрын

safety glasses guys👍🏻

@DaleParham-n3o 20 күн бұрын

I'm building a house out of 2forty foot container and need to know if I need to add extra strength to the container beams along the bottom of the container

@aux1z11 10 ай бұрын

Do you have a link for the attachment for jacking the container ?

@1yachtcarpenter 6 ай бұрын

Use the osolating tool with a scraper blade to cut out any caulking. Custs like butter. Save the ute knife..

@rosaritobeachmexicorosarit687 7 ай бұрын

So when you remove the flooring you can then insulate the floor? Because you can not insulate from the bottom there will be a vacant area in there? Or is it possible to just spray foam the bottom and your done? Do you think i will need to insulate the floor living in Rosarito México? Its always 50-80 degrees all year round mostly 69 degrees here most everyday thanks love your videos i never wanted to believe that the floors are toxic but i see they are toxic but we eat a lot of tacos so i think we will be fine and we wont have much to walk on if we do keep eating the floors

@cdoublejj Жыл бұрын

i've had plenty of stripped phillips over the years not as much torx, suprised whent back to phillips

@TheContainerGuyTV Жыл бұрын

Agreed

@jonb6347 Жыл бұрын

So since its not haz can i just use water sealant or have to use epoxy

@alsehl3609 Жыл бұрын

The floor provides major lateral bracing! Think twice before removing

@zelwinters1981 16 күн бұрын

What bit do I need to undo these?

@havasuhenderson2069 Жыл бұрын

Great video bud! Hey we have a container that we converted into a bike repair shop. The floor was epoxy painted but now we are having an issue with a dark oily substance seeping up through the floor. We cut out a section of the floor and found that the bottom of the container was coated with a tar type of substance. Is there something we can do to prevent the seepage without having to replace the floor? Thanks

@TheContainerGuyTV Жыл бұрын

Weird that it's seeping upwards. Not really how gravity works. Must be catching a ride with water or something. Is the container sitting directly on the ground? If so, try getting it up on blocking to air out the underside.

@dovahkindragonborn9827 Жыл бұрын

thanks for the very useful video what would the best way for a normal guy to insulate the floor? set it up on a bunch of blocks and crawl under and put mineral wool? use a forklift and lift it up and have a spray foam guy get underneath? both of these ideas sound super risky to me any experts?

@TheContainerGuyTV Жыл бұрын

2" rigid foam on top of the container floor, tape the seams, install 5/8" T&G plywood subfloor on top (screw down through foam into the container floor), install flooring on top of subfloor, build walls directly on top of the new flooring. Leave everything 1" away from the walls. Spray foam insulate.

@dovahkindragonborn9827 Жыл бұрын

@@TheContainerGuyTV great answer ... no need to mess with the floors if you don't have to

@OmmerSyssel 10 ай бұрын

Tilt the box ~30 degrees with a plain "coffee mill" jack. Support with suitable steel fixture for personal safety. Isolate with Styrofoam or whatever preferred... Seal of the whole bottom with blind riveted ~1mm galvanised sheet against pests. We made hundreds of these constructions for industrial use in Scandinavia..

@kevinstewart5052 Жыл бұрын

I see you have a way to jack corners can you add wheels to the corner for temp moving containers without a lift

@kumark214 Жыл бұрын

In the factory floor the castor wheels are locked to the bottom of the corner casting hole to move it in the assembly line. You can do the same.

@Boraxo 9 ай бұрын

Spent a few years replacing damaged floors in shipping containers.

@zurialjazz Жыл бұрын

When pulling up flooring. Use better straps. Pick up at Truck travel centers. Not the ones at harbor freight or hardware store.

@TheContainerGuyTV Жыл бұрын

That's what I said in the video. Use 2" straps.

@dk7863 Жыл бұрын

🙂

@renehenriquez666 Жыл бұрын

Do you recommend use a epoxy over that floor?

@TheContainerGuyTV Жыл бұрын

Yes, we use anti-slip epoxy paint quite often for industrial mods

@MattWeber 9 ай бұрын

When you innovate your whole floor removal process with a single tie strap and free up all of your heavy equipment of other work around the yard.

@jeanmarcforcier383 Жыл бұрын

? does it contain formaldehyde in the wood glue?

@TheContainerGuyTV Жыл бұрын

Who cares. Don't eat it and you'll be fine.

@professionalinspectionserv4228 5 ай бұрын

Thankyou for providing information. It is too bad you do not offer container services in the US, specifically VA. There seems a wash of internet container companies across the US. Mis advertising, not disclosing full pricing, transportation costs... I am interested in the purchase of some containers and may transport them myself... but I can not get a depot price to understand the markup in price. I am willing to pay a fair price for me not a good price to the "broker " who has no controll on the quality. The "shipping container transportation seems more then the container cost, great gig. Thanks for your information. Additional information on how to move/load them ourselves would be helpful. At least not what to do.

@roadsouzinkie Жыл бұрын

Come a long would work well

@kpbarbee 11 ай бұрын

Is it safe to insulate the container from underneath?

@TheContainerGuyTV 11 ай бұрын

We spray foam the underside all the time.

@OmmerSyssel 10 ай бұрын

We insulate with Styrofoam and close with galvanised sheet against pests.

@Mikey-xz7cv 11 ай бұрын

Will needs some new boots 😄

@TheContainerGuyTV 11 ай бұрын

Haha he finally got some. Been 2 weeks of blisters in the scorching heat 🤬

@FirstLastOne 9 ай бұрын

The myth isn't actually a myth but more the usual confusion of facts. A 'one tripper' will usually have a safe floor but where the actual concern comes from is the used/well used containers that could have been used for transport and/or storage of highly toxic chemicals and products that would have contaminated the floorboards. Some companies keep strict records of items transported with these containers but if the container was used as extra storage at some location using extremely toxic products, there's no enforcement on logs so you'll never know.

@johnwolf1475 Жыл бұрын

part of the floor issue - is if it soaks up chemical spills.. likwe a 50 gallon drunm of cyanide lleaking..

@TheContainerGuyTV Жыл бұрын

Would be pretty obvious on a new container (only used once). People should be using one time use containers if they are building a house out of it.

@johnworthington4556 4 ай бұрын

So, this isn't acceptable as a high fiber diet?

@Few.Be.There.That.Find.It. Жыл бұрын

There's no way to insulate under the wood floors without removing them?

@TheContainerGuyTV Жыл бұрын

Easy to insulate under without removing the floor. Block the container up and spray foam them.

@OmmerSyssel 10 ай бұрын

Tilt the box ~30 degrees with plain "coffee mill" jack and fix it for personal safety..

@dsdragoon Жыл бұрын

I suggest not standing on the floor panel you are trying to lift. Also cutting around all four edges of caulk before you try to lift the panel.

@TheContainerGuyTV Жыл бұрын

I love this channel for all the amazing feedback 🤠

@scatterbrain9490 Жыл бұрын

Buying a used one and not knowing what may have been spilt or leaked on the floors during their working life, might be what online people are referring to. My friends container was bought used and has actual lumber, maybe 2 x 12s treated boards and I have heard that treated wood is meant for outdoor use only.

@TheContainerGuyTV Жыл бұрын

Maybe in some instances but others think it's the chemical applied at the factory that's toxic. Don't use used containers for container homes. Silly to waste all that money on something that won't last.

@addictiveaussie 8 ай бұрын

06:16 WTF???!!!!!!!!

@SpaceTrashCrash 6 ай бұрын

Yes, haphazardly reaching under while lowering the box, and the block should only go under corner brackets.

@SpaceTrashCrash 6 ай бұрын

I suppose the larger block placed underneath could have been used to push out a flooring section. I kept thinking of how the hand signals to lower the box were not clear and fool proof, so losing an arm could happen.

@silent1967 8 ай бұрын

I like my floor with ketchup.

@boossersgarage3239 7 ай бұрын

Do not eat the chinese plywood, amazing that you had to say that....

@shirleymiller1337 Жыл бұрын

Question _Are your D rings strong enough to hold a moving ladder with a 200 lb. Person?

@TheContainerGuyTV Жыл бұрын

Yes

@paulmarcoux207 Жыл бұрын

Where's the volume?!

@TheContainerGuyTV Жыл бұрын

Right side of your phone 🤳

@paulmarcoux207 Жыл бұрын

@@TheContainerGuyTV I know that! I had my volume up all the way. But couldn't hear your video. Usually I have no problem. I like watching your videos.

@jackburton5085 Жыл бұрын

x1 Twist 'N' Jack 280€!??!?!?!?!? I can weld two with my self $10 worth of scrap steel. Guys the price is outrageously high!

@TheContainerGuyTV Жыл бұрын

The scrap steel pile eventually runs out. Engineers don't stamp scrap either. We don't sell in Euro so that price may be what Amazon is charging.

@Jim-h9u 18 күн бұрын

Over 9 minutes before any attempt was made to remove a single piece of flooring. Does everyone know to remove all the screws? Does everyone know how to tell a phillips head from a torx head?

@WorldPowerLabs Жыл бұрын

Did Shop Cat approve?

@TheContainerGuyTV Жыл бұрын

100%. Our staff thinks the cat deserves its own video haha. Be funny to strap a GoPro to it and see what it gets up to in a day.

@concorde2003 Жыл бұрын

The kitty cat looks unhealthy and hungry. Please take it inside and feed it.

@TheContainerGuyTV Жыл бұрын

The cat was 3/4 froze to death on the side of the road when we rescued it and happy and healthy now with a couple dozen owners that love her too much and should get back to work 😂

@dickhernandez3191 5 ай бұрын

You are to expensive for tool part

@mattblack133 11 ай бұрын

$279 for 1? Or a set of 4? Amazon doesn't specify. Thx

@TheContainerGuyTV 11 ай бұрын

Are you referring to the Twist N Jack container lifters?

@mattblack133 11 ай бұрын

@@TheContainerGuyTV yes

@michaelc9128 9 ай бұрын

Wow yes Amazon charges $280 USD. for this twist jack that's nuts

@SpaceTrashCrash 6 ай бұрын

It's $279 for only one bracket/lug only without the jack, which is crazy. I see another brand charging $42 for a jack lug with the jack, which makes it $168+ to lift all corners simultaneously.