Removing the flywheel from an old Evinrude/Johnson outboard - step by step
Рет қаралды 5,795
7 жыл бұрынStep by step removal of the flywheel off an old Evinrude. The principles for this one apply from the early 50's up to the 80's, I do so believe.
Do NOT use a 3 jaw puller! You WILL crack the flywheel. I've done it!
Check my other videos to see inspecting the mag plate underneath.
@psychodad4634 5 жыл бұрын
Great job. Helped me out with a 1956 15 hp Evinrude.
@omcbob37 3 жыл бұрын
You should leave the flywheel nut threaded onto the crankshaft just a few turns to keep from mashing the threads when you tighten down the center bolt on the puller.
@gwjames8046 3 жыл бұрын
my pull cord starter for a Evinrude 2.3 he2reta has jammed can you help please
@ericj2102 3 жыл бұрын
What puller set are you using and where can I get one?
@peterfaggella3120 3 жыл бұрын
That is a cheapy Harbor Freight set.
@petermoyes8766 5 жыл бұрын
WHAT SIZE SOCKET FOR A 1976 9.5 EVINRUDE ,,THE RECESS ON THE FLYWHEEL HAS TO BE A VERY SKINNY WALLED SOCKET ..GREAT VIDS ,PLEASYER TO SUB
T-Mikes Vintage Outboards Restoration
Рет қаралды 3,8 М.
HTSS Outboards Boats & Trains
Рет қаралды 4,3 М.
TAKEOFFFILMS
Рет қаралды 4,9 МЛН