Rendering Walls Made Easy With This Bagged Render ("I Should’ve USED THIS YEARS AGO!!!")

Рет қаралды 152,884

Жыл бұрын

The Old ways of rendering is slow and unreliable. This modern guide to will show you a faster, more efficient way to render walls. We’re ditching sand cement render and getting rid of old tools.
I’ll show you a better process for rendering where we’re using better materials, better tools and a totally different process. If you’re serious about rendering then I think you’ll love this video.
Let us know what you think by commenting below. And please like and subscribe to our channel for more up to date ways to render and plaster.
/ plasteringforbeginners
Thanks for watching. I'll see you one the next one.
Cheers.
Blaine Gray,
Plastering For Beginners
#rendering #plastering #construction #diy #plasteringwork

Пікірлер: 247

@Foxxiel Жыл бұрын

Your videos just get better. Thanks so much 👌🏻 xx

@tonyc1167 Жыл бұрын

brilliant job Blaine

@PlasteringForBeginners Жыл бұрын

Thank you pal.

@nigelsladdin6856 9 ай бұрын

Brilliant video

@johnwealthy6044 Жыл бұрын

Nice video Blaine... looking forward to going on the WeberOCR course !!

@yerzhanabilakhatov9099 Жыл бұрын

you gave me a great experience! I have been doing this for many years but you are a master of your craft!

@yerzhanabilakhatov9099 Жыл бұрын

thanks for the experience

@Oggmiestergeneral 4 ай бұрын

Very helpful video! Thanks…

@petevito Жыл бұрын

Great job...

@AzadKhan-nh2le 2 ай бұрын

thats really informative great advice

@denisconor648 Жыл бұрын

Great stuff

@stepheno2462 11 ай бұрын

Great video.

@Trowel1892 Жыл бұрын

Top job Blaine looks mint

@PlasteringForBeginners Жыл бұрын

Thank you mate!

@kevinhiggins373 Жыл бұрын

Looks like a brilliant product !

@PlasteringForBeginners Жыл бұрын

It is pal!!

@Mgt461 Жыл бұрын

Excellent vid and very well put together and very informative. You used some techniques, materials and tools that I’m going to try out. Thanks for the vid.

@PlasteringForBeginners Жыл бұрын

Thank you mate. I really appreciate that!!

@Individjual 11 ай бұрын

Damn, your good. Hard to find tradesmen like yourself.

@johnhart4524 Жыл бұрын

I'm 58 and never used the materials you are using or the power tool. Will try this on a small job first to get a feel. Thanks

@julianlyons711 Жыл бұрын

Great content

@simongb7897 11 ай бұрын

Watched your other content for a bit of an education on my outside garden wall, heard about this OCR so I'm going to give it a go.

@PlasteringForBeginners 11 ай бұрын

It’s good stuff mate! Good luck my friend

@andykelly4056 Ай бұрын

These vids are great 👍

@owenbutcher1954 Жыл бұрын

Excellent

@PlasteringForBeginners Жыл бұрын

Thanks mate!

@paulcozma4911 Жыл бұрын

Nice job!!👍👍

@PlasteringForBeginners Жыл бұрын

Thank you!

@viankalobosvalenzuela7456 Жыл бұрын

Excelente y muy hermoso trabajo felicidades saludos 👊👏👌🏻💪💯

@PlasteringForBeginners Жыл бұрын

👍👍👍

@steerpike50 9 ай бұрын

Great vid thanks

@bangstick4446 Жыл бұрын

Been doing it for years mate , I use the mesh for first coat tho

@peterjones6226 Жыл бұрын

Another well explained vid. Definitely be giving this product a try on my next rendering job Cheers Blaine 👍

@PlasteringForBeginners Жыл бұрын

Thank you mate. All the best my friend 👍

@cvickz9791 Жыл бұрын

Brilliant video pal. We are just using the new render Weber oc... How soon do you use the power float after applying the second coat? Thanks pal 👌👌

@shodan198 Жыл бұрын

Top class vid mate

@PlasteringForBeginners Жыл бұрын

Thank you very much 👍

@andrewhannah3826 Жыл бұрын

another excellent vid and very informative as always. Off the subject of rendering about a month ago you put up a video on how to apply plaster to a wall With a roller and at the end you informed us that you were going to do a more in-depth video on the subject. If so when could we expect to see a follow up. Many thanks and great channel.

@PlasteringForBeginners Жыл бұрын

Good point my friend. It’s coming in the near future - just sorting a few things and I’ll get it done. But it’s due, don’t you worry 👍

@Strato-deception.744 Жыл бұрын

Mlih!👍

@PlasteringForBeginners Жыл бұрын

👍👍👍

@rbbuildsandleisure1470 Жыл бұрын

Great vid thanks, I have been using those sponge floats for ages they are brilliant, get yourself a Washboy grouting bucket they make cleaning the sponge floats a doddle

@PlasteringForBeginners Жыл бұрын

Great advice…cheers pal. I’ll look into it 👍

@Billy-dl7yg Жыл бұрын

Top job mate👍, it's a game changer isn't it, started using it about 8-9 years ago, don't think I've used s an c since

@PlasteringForBeginners Жыл бұрын

It’s great stuff mate. I don’t I’ll go back either to be honest - it’s a game changer

@mikesmith1485 16 күн бұрын

be-ah renderer....get you, ducky.

@JayE1996_ Жыл бұрын

Me and my old man have always used this. Will mesh first coat would never mess about with a sand cement mixer

@PlasteringForBeginners Жыл бұрын

It’s good stuff mate!!

@jacl4636 Жыл бұрын

Cheers for sharing the knowledge again mate. Can’t wait to give it a go on my next landscaping wall. Will probably try the Refina diamond and sponge floats too Great to see people like you sharing what you know. Oh, it’s Voila, not Viola 👊🏻

@PlasteringForBeginners Жыл бұрын

Thank you mate and good luck. You’ll love them… And thank you but the correction 😂😂

@biggy12uk93 Жыл бұрын

Hi Blane, love the vids. What cement would you recommend Portland or Masonary for rendering onto Celcon/Thermalite blocks also what miz ratio would you suggest for the scratch coat and top coat? many thanks

@rockroll456 Жыл бұрын

Mint bud

@PlasteringForBeginners Жыл бұрын

Cheers pal!

@paul1969g 11 ай бұрын

Hi Blaine love your videos top notch , just wondered what length of refina float would you reccomened? Many thanks

@gordonbennett3763 Жыл бұрын

Hi, your videos are great! Would you put mesh in between your coats of OCR? Thanks

@mikesaul8711 Жыл бұрын

Just blown me away Blaine, is it breathable??, kind regards Mike.norfolk.

@jeffyoung321 Жыл бұрын

Hi, love your videos.. Can I ask, if you were rendering a garden planter, what render would you recommend using for the top edge where water is likely to sit when it rains? Thanks.

@Matt-yl2ok Жыл бұрын

Hi Blaine another great vid can I put normal accelerator in with this product I used it today and took ages to be able to float .. first time using and I did like it 👍🏻 thanks mate

@amandahimsworth7363 Жыл бұрын

Hi there. Love this product but wanted to use it over Yorkshire stone. Do you think it would be suitable if I use mesh and bonding agent with it? Or do you think I’ll need to do a cement render instead fully or just cement to fill in the ridges (which are quite shallow) then could I use OCR? Also could I use it on mullions? Or you think cement is better? Cheers for any help as I’m struggling to get much help from the company directly and I’m quite new to this game.

@marksavory4136 Жыл бұрын

Blaine good vid we got some external walls to do on a pool building so going to get a Refina power float as well as diamond floats can I ask why you don’t use the sponge that comes with the power float ? Thanks mark from wolvo

@williammacphee335 Жыл бұрын

Superb mate as always. Off subject (as other comments) What would you say is best flexi trowel about? I was using raf superflex2 and was decent enough but now has a kink in it that I can get out lol. Heard ox flex is very good but never used ox haha

@matthewflanagan8654 Жыл бұрын

Hi Blaine what depth are the render beads do you use for the OCR. Videos are brilliant btw, gives me the confidence to give it a go!

@cvickz9791 Жыл бұрын

Great video pal. We have just applied 2 coats of the oc Webber ...how soon after can we power float it. Thankyou pal 👌👌

@Unboxandhacks Жыл бұрын

Hi just came across your channel, great and informal videos. Can I use this render to repair external walls. There are some parts of old render that have come off my house external walls. Thanks

@KieranWalsh-lm2eh 2 ай бұрын

Hi, your videos are great and really helpful, thank you. I am a little lost, as on one of your other videos you advise against using Monocuch render but OCR is Monocuch??

@chriswilliams2004 5 ай бұрын

Hi Blaine, thanks for sharing these videos mate, they really are a great help. Do you mind if I ask, that if I were to use webber ocr in the coming weeks and presumably it will be still cold. Would it be a case of putting the two coats on, ruling off and floating the following day? Or does this stuff set the same day like a traditional rendered wall? Thank you

@matthewsmyth284 Жыл бұрын

I've used webber for years. It's bang on

@georgelambertpt Жыл бұрын

Top vid as always Blaine 👍 Quick question.. if I'm breaking down large walls into smaller sections, would you recommend expansion beads to do this? Cheers!

@FirstLast-yj4ri 10 ай бұрын

Exactly the same question that I have!

@davidwhite3004 21 күн бұрын

Does weber render stick well to cement board and do you need to mesh the cement board first? Thanks for any advice given

@alpha.tradie Жыл бұрын

this is hot 🔥🔥🔥

@chrsrans1 7 ай бұрын

Hi mate, is it possible to skim and tile over weber ocr on internal reveals. Is there I primer that I could use. Cheers, Chris.

@ExposeClothing 8 ай бұрын

can you do a video on the difference between Hardwall plaster basecoat, and cement acrylic render? and what if you wanted to keep your walls rather thin? can you use less?

@umarhussain8543 Жыл бұрын

Which product silicone render colour would you use to finish the job?

@extremewanted Жыл бұрын

Hi, Does it not require the net that goes before scratching?

@cakerer 10 ай бұрын

Is this ok to use on previously rendered wall with blown bricks? Is it ok for filling voids between bricks or should I repoint first?

@nicholasbehan5373 10 ай бұрын

Bloody hell im buying a power float I’m rendering my house 37 years a spread Thanks mate Nice work ?

@Skim902 Жыл бұрын

Hi Blane quick question do you think it would be ok to use ocr on a scratch with waterproof.

@user-xc7gb8gj6r Жыл бұрын

Is it the same batch for scratch coat and top coat ? And do you not mesh the scratch coat?

@james00021 Жыл бұрын

Hi Blaine. I know this is a bit off topic. But just wondering if you know any other way of insulating and preventing damp in a bathroom using the solid plastering method rather than moisture resistant plasterboards?

@Grumpyoldman782 Жыл бұрын

Hi Blaine, This vid is an absolute godsend as I'm psyching myself up to render our block planters. Would you recommend using a mesh on the base coat or just the scratching ?

@Trekz86 Жыл бұрын

Brickwork doesn't need mesh. Obviously it'll make the render stronger and theres no harm using it but if the brick is going to crack the render will crack

@fcolon1976 2 ай бұрын

I want to do this to my house foundation but it has stucco on it, do I remove the stucco first or can I apply this right over it? Any help would be greatly appreciated

@siazare6142 7 ай бұрын

Hi Can you please tell me, which material is suitable for applying over waterproofing walls???? Please tell me Thanks

@marktran5076 Жыл бұрын

Hi. May I ask why do you have to do it in layers.? Cau you just do it in 1 layer like sand and cement mortar?

@LJHPlastering 11 ай бұрын

Hi Blaine, Are you using 6mm thin coat or 10mm beads accepted first ever job using Weber ocr so just wondering Thanks Luke.

@markbarratt4672 Ай бұрын

Hi Blaine . Can this product be used over 2 days as a scratch coat on 1st day and top on coat on the 2nd day the same as traditional render ? I ask as we have a huge gable end to render , client dosen't want wall broken up with beads .

@almd9891 Жыл бұрын

Great videos. Really helpful. Quick question - I’ve been reading that some industrial constructions use titanium dioxide in the mix to create a whiter finished render, rather than painting it. Is this something you could try to see how well it works? Painting is good but needs to be redone and the titanium dioxide apparently is self cleaning when in contact with air and water. Would be interested to see what you think. Thanks

@bigdmed955 Жыл бұрын

Webber do a coloured finish in many colours for top coat and I've used the silicone render and I now use nothing else as it also acts as an additional water barrier too.

@jondowling720 Жыл бұрын

Hi Blaine, what is the average coverage per bag. Thanks

@July-A7 Жыл бұрын

Very good job, but who in their right mind will decide to render a great looking facing brick wall? If you were puting external insulation, sure. Also, it's best to embed a mesh in the first coat.

@PlasteringForBeginners Жыл бұрын

👍👍

@berusbogzniszczenia4359 8 ай бұрын

Can i use this ready mix for window sill ?

@jondowling720 Ай бұрын

Hi Blaine. Great video. Can you paint over OCR once dry. Thanks

@PlasteringForBeginners Ай бұрын

Yea mate

@1717jono Жыл бұрын

Hi blain great video as always. Can you apply this to a sand and cement scratch coat?

@noahc4685 Жыл бұрын

Yes

@bigmik3566 11 ай бұрын

Hi. What is best silicone render Weber or k rend or this stuff?

@deangoundry 4 ай бұрын

What head do you use on the power float ?

@Almas1297 4 ай бұрын

I need this on my external walls .. does this prevent walls from absorbing water ? Or does it need to be painted with water seal?

@francis9382 Жыл бұрын

I have a bungalow with P pebble - dash walls , is it possible for you to make a video on how to cover pebble dash walls with this new one coat render and the best way to a plie it...(do you use the Mesh or not ) I seen so many different ways of render( one coat) on videos Can you help Frank

@IrishBoy Жыл бұрын

how long you need to wait for 2nd coat?

@jaffatanski 4 ай бұрын

Could this be applied to a sand/cement scratch coat?

@abdulaziz-pb5ni Жыл бұрын

Will this work over lime plaster for my cellar

@gaetanocapasso7247 10 ай бұрын

What about armouring with mesh in between the two coats?

@cryptomavic1 Жыл бұрын

Hey dude hope ur good see on this render job you stop beaded down the middle of the gable was that just to rule off and ur gonna do the other half? Good job bro

@grumpygrandpa3640 2 ай бұрын

What’s cheaper though the old sand and cement method or this premix. I always thought these premix bags where just for spot repairs

@andycurtis164 6 ай бұрын

Amazing but one question. Can that be painted

@Raveworship Жыл бұрын

Blaine, is this a more expensive solution than sand and cement please? I have large garden wall areas to render and I am just starting out. I just don't know what would be more cost effective

@hayter68 Ай бұрын

how long after final coat can you decorate with paint?

@bullmastiffkent3309 Жыл бұрын

How long does this have to be left to cure before painting? Cant seem to find the info on this

@jamessullivan3829 Жыл бұрын

How thick can this ocr be applied on each coat?

@bigmik3566 11 ай бұрын

I'm guessing this isn't the same as silicone ones. But also have you used a base coat product for both coats? Is that the final coat?

@darrylfranklin7490 Жыл бұрын

Never mind that pre grit, Use Webber rend aid for your scratch and leave it a couple of days to cure If you find it expensive for a scratch you can half and half it with sand and cement, Amazing product, Then top off with the OCR , No issues, Whatever you use Scratch should be left to dry a few days !! Basics of rendering

@PlasteringForBeginners Жыл бұрын

I’ll look into that mate…cheers 👍

@NastyRhythm Жыл бұрын

yer thats what webber told me to use too. Rendaid with mesh

@R9K7 Жыл бұрын

Class vid. Starting a new project soon. Do you use a silicone product to top coat it? If so which one? Will you render all months of the year now? Cheers dude

@PlasteringForBeginners Жыл бұрын

I just kept it as is mate but you can use a silicone top. I just opted for the sand cement finish to be fair. I’ve not tried this in winter yet though so we’ll see hire it performs when it’s cold 🥶

@PlasteringForBeginners Жыл бұрын

*how

@barrybloggs22 Жыл бұрын

Thanks for your great videos, my wall is to big to tackle in one go, is it possible to do a section at at time then join up with another at a later date ?

@PlasteringForBeginners Жыл бұрын

It’s not a good idea with render mate. It doesn’t join well - it needs to be finish together unfortunately

@barrybloggs22 Ай бұрын

Thanks mate

@jamiec4108 Жыл бұрын

Great video. How long after you had finished applying the second coat did you start floating?

@PlasteringForBeginners Жыл бұрын

This was pretty much straight away. As soon as the top coat was applied I was floating it. Very fast product to use unlike sand cement Render.

@jamiec4108 Жыл бұрын

Ok thanks, and does the render pre grit have to be done the day before like green grit or same day

@peter150388 Жыл бұрын

With OCR it’s a one coat system, why did you apply in two coats, scratching the first?

@Hazardpro Жыл бұрын

Totally agree. It’s a one coat application

@imakren9495 Жыл бұрын

Where are you based? You do a cracking job and I need a good plasterer!

@PlasteringForBeginners Жыл бұрын

Hastings mate 👍

@jonesconrad1 Жыл бұрын

Why don't you pink grip the beads on? Genuine question

@jameshawe7499 Жыл бұрын

Great video bud if your doing big areas can you leave it over night or for a few days??? If yes would you pva the scratch

@PlasteringForBeginners Жыл бұрын

I’m sure you can - you’d just have to spray water on the render before applying the second coat.

@petergray882 Жыл бұрын

Wouldn't use PVA outdoors ,SBR only

@carldriscoll6736 Жыл бұрын

Can you apply second coat of Weber render the following day if for example the weather turns or the areas too large or do both coats need to be applied same day ?. Thank you and love the videos my plastering has gone to another level.

@PlasteringForBeginners Жыл бұрын

Yeah you can matey. Just spray the wall with water first and you’re good to go. Thank you by the way - that means a lot. Cheers 👍👍

@carldriscoll6736 Жыл бұрын

@@PlasteringForBeginners Thank you 👍

@roryprice7949 Жыл бұрын

Much better products and cheaper than Weber out there.

@kevinadams9992 Жыл бұрын

What would you recommend?

@rockroll456 Ай бұрын

How many meters was that gable bud 💪🏻

@NastyRhythm Жыл бұрын

can you paint over this OCR with regular masonry paint?

@seanwalsh1613 Жыл бұрын

Yes mate or silicone top it

@NastyRhythm Жыл бұрын

@@seanwalsh1613 awesome thanks bud One thing I wanted to ask, is if I were to do a scratch coat first, could I leave it like a day or so before doing the top coat? Can't get much ocr currently and only have enough to do a scratch coat. So was hoping I could scratch coat it and wait till it comes back in stock Also I'm going to rendering onto breeze block.. would i need to use a mesh for this?