www.renegadecovers.com You got it Kevin, If you have questions hit up the live chat or send us an email on that site.

Pretty easy. It screws into this www.uscargocontrol.com/products/double-stud-fitting-w-bolt-thread

Yes, you can order from www.renegadecovers.com or call 801-910-6312

Hi Julie, Great question and welcome to the world of over-landing. You are correct the cover will support 2,000 lbs, however, truck manufacturers do not publish the weight capacity of their bed rails. So you have to use common sense on what load to put on top. We have seen customers put a cover, Renegade Racks, and a rooftop tent then load it full of equipment with no issues on the bed rails of the Gladiator. Any more questions?

If you plan to haul anywhere near 2000#, you need a real truck. Those paper thin bed rails on the Gladiator barely support a load in the bed. A buddy of mine was hauling a lawn mower and it shifted in the bed and bent one of his bed rails so bad that the tail gate wouldn't close right.

Thanks for sharing we will have to make a video dedicated to this. We do have a blog sharing the steps on how to load and unload an ATV renegadecovers.com/atv-tonneau-cover/

You may want to check one of our customers review about his fifth wheel on his truck: kzfaq.info/get/bejne/fNCDgrde2LPYnGg.html You can check this out too (time stamp is 2:35 secs): kzfaq.info/get/bejne/bJp9ZpmWr7qVp3U.html You can also check in our website galley pictures: renegadecovers.com/gallery/?v=a25496ebf095 Hope to see you join in our tribe :)

Hi Memo, So our customer who did this video has since hauled it with a 5th wheel with no issues. You Can haul it with a gooseneck/5th wheel. Make sure you have clearance under the trailer. the cover when folded is 4.5 inches high. And you will want to secure the cover down to make sure it does not unfold during transit. Its highly unlikely but we always err on the side of safety.

The cover can be folded to the panel by the cab and have access to the majority of the bed or just take it off the truck.

Here you go: www.amazon.com/weBoost-477154-Booster-Networks-Carriers/dp/B08WYQND57?th=1 and the quick release anchor www.uscargocontrol.com/products/double-stud-fitting-w-bolt-thread

@@RenegadeCovers thanks you. Did you purchase the 1st or 2nd generation? I didn’t realize how expensive it would be. Please be honest and tell me how well you feel it helps with reception. If possible, would you have an example of where you didn’t get reception and now with this you get great reception? Thanks again.

Ok so here is my opinion. You will get what you paid for it ;) I bought the second gen because it supposedly works with 5g and will be good on technology for over a decade. So 90% of the time I have mine turned off because I live in a large metro and it will actually decreases my cell signal because it amplifies all the carriers in the cab and makes it hard for the cell phone to get the right signal. The time I use it is on road trips. The areas where there is a cell tower every few miles and dead spots in between. That is where it shines. It will take a signal where a call is dropped and make it so you can complete that call. You have to have at least some tiny signal and it will boost it. There is a hunting spot that is in Wyoming that I can send text but not calls I turn on the booster and I can call someone no problem. Its not a miracle worker but It does work very well. I was able to justify it because I own my own business and it should last more than 10 years. I would buy again especially because I road trip several times a year. I hope that helps.

@@RenegadeCovers thanks for the details, it was helpful.

Thanks for your comment!

So it sticks in 1 1/2 '' on each side. I am unfamiliar with a camper application... based on just eye balling it they are incompatible with one another.

@@RenegadeCovers thank you, i think that will work

@@carperdiem8754 You are welcome. Have a good day.

Hi Aaron, we will be adding this to the website soon. When you order a Renegade Cover it comes with 4 tiedown rings included at no additional fee. We also saw your website form submission and will get back to you on your other questions. Stay tuned we are publishing an install video on a Ford TODAY!

@@RenegadeCovers Cool, an educated purchase is always the best purchase. Install video will help many potential customers on the fence! Ball is in your court

Agreed, here is the Installation video. kzfaq.info/get/bejne/bq-Jp7R_rsysk2g.html

we provide 4 anchors that can be moved to any point around the cover. You are not restricted to where a cleat is installed.

No, we use those bed rails to install the Renegade Cover. No drilling.

@@davepacker9932 Do you have to have the factory track system to install? I have a 2014 crewmax with no track system.

@@D0KH0L1D43 Yes, we use the track system to attach our latches.

Thank you for your comment. We are releasing a video soon about how to increase the waterproofing. Thank you for watching our content.  Feel free to read our reviews on google by following this link: direct.me/renegadecovers

Here is the new video about leaking: kzfaq.info/get/bejne/jaumkrWVu5y4kZs.html

Yes you are correct we are working on shorting the long lead time with our vendors and supply chain issues. Thank you for commenting and have a great day.

@@RenegadeCovers Have you been able to reduce the lead time?

@@RealCptHammonds it’s still 17-22 weeks of lead time. I’m not waiting 4-5 months for a bed cover.

Wow no need for me to watch the rest of this thank you.

@@christianzaccone4347 Yes. I ended up with Diamondback cover and couldn't be more happy.

Good choice. They don’t back their product. See my KZfaq review of the cover. I’m their first “non renegade sponsored” review.

@Edward King, Hi, thank you for your interest in watching one of our videos. We really appreciate your kind word that you like the rugged concept of our cover. Yes it does not have the ability to fold against the glass because each cover weighs between 135-165 lbs. This is because the goal with the cover was to support 2,000 lbs. One feature you may not have seen is you can remove the cover completely with no tools within seconds. You can also open the cab section backward.  Again thanks for watching and commenting.

We are working on it :) We want to get it right

@@RenegadeCovers you guys have a well made truck cover.especially with the detachable parts to place wherever you need.i love that its low profile as well.. not too bulky like the diamondback ..will yall have the toolbox ready this year? Just asking because I'm ready to buy yalls. Lol. Lower the price though. Pleaseee.

@@whatsgrowingon We hear ya, working on it. Thanks

@@whatsgrowingon We will, stay tuned.

@@davepacker9932 Fixxpertise Soft Quad Fold Truck Bed Covers is promotion. Buy their tonneau cover, you can get a shovel for free. Click below links. www.amazon.com/gp/mpc/A3A0ARR48DEGRU www.amazon.com/gp/mpc/A2811LOJGEWL0Q

Good to know thank you for sharing

@@RenegadeCovers I've been watching all your videos. I just ordered a 2022 2500 HD silverado. I'm going to purchase the renegade cover for this new truck.

We are sorry about that.

Your right thanks for stopping by

We are sorry the freight shipping charge changed your mind. Thank you for considering us.

Dark Knight. First off your name is awesome. Thank you for the feedback.

Thanks for stopping by.