this is the best Repair a Cracked Windshield vid on youtube.......very easy to understand

I'm sitting here for hours watching glass repair videos, bunch of amateur videos with their $10 diy repair kit and a bunch of professional videos with their $1k kit. Your video is the only one that married the two together. Thank you!

The repair kit manufacturer should be paying you for this video. This is the best advertisement they could hope for. Great job. I may try this next time I have a cracked windshield.

I've been watching DIY windshield crack repair videos all afternoon getting prepped to do my 4Runner and this one is BY FAR the best one I have watched. Thanks so much!! I have a long crack in my windshield very similar to yours, same place and length.

Again you find ways to keep the cost down of a repair. That's going to help a lot of people. Your work is really appreciated.

HANDS DOWN THE MOST BESTEST... SUPER MOST WONDERFUL.... EASIEST TO UNDERSTAND AND FOLLOW... GLASS REPAIR VIDEO ON KZfaq!!!!

Fair play to you fella..I've been a windscreen fitter for over 20 years and I'm well impressed by your efforts..well done that man 👍🏽👍🏽

41 people disliked, 41 one of those worked at auto-glass.

Thanks a lot dude. I noticed a small crack in the glass vista roof on my Mustang. This is about a $2000 piece of glass. Looked at it a couple of hours later and it had started running. It grew from about an inch to around four inches in a very short time just from changing ambient temperature I guess. No professional on-site options were quickly available so I hit You Tube and eventually ran across your tutorial here. I ran to Wally World, picked up this kit and with the help of my Dremel and diamond bit stopped the crack in it's tracks and made a professional looking repair. The crack is only visible at the perfect angle in the perfect light. Totally un-noticeable if you are not looking for it. Thanks for sharing brother.

Worked wonderfully on a 9" windshield crack started by a rock hit at the bottom left drivers side. Instead of using grease on the suction cups , I actually used those cups to press the sealer into the crack with heavy pressure since the length of the crack was relatively short. Thanks for posting, it worked!!

The BEST glass repair video on YT, thank you!

I've been looking for different ways to repair my cracked windshield at home rather than spending way too much to have it done professionally. GREAT video! I'll be picking up everything I need tomorrow!

Pretty impressive to cover such a long crack. Never would have thought.

Used this on Nov 5,2015 on a windsheild that had been installed a month before got a 1 inch chip and crack upper corner driver side. Followed direction did in shade rolled out into sun scrapped it off crack has vanished and stayed GONE. its now Dec 4,2016 still can't see any sign of crack or chip.

Been watching a lot of windscreen repair vids this evening and this is by far the best. Great work 👍

great vid short and sweet, half the videos out there would probably would give some strange rant for five mins about the history of windshield

What a great idea with the grease. And a great application where a replacement would be a PITA.

I learn something new every time you post! Thanks for sharing this.

Excellent vid. Love the grease idea wouldn't have thought of that.

Super duper, sounds better than the $269 some place quoted me for a replacement.

I can't see the crack 'cause I have cracks on my phone screen

I love you're videos so much. Please don't stop with them :)

Just watched how to put a rearview mirror on which I’ve done many times before but your product caught my eye. And then you put this link in your video now I’m watching this one which is fascinating as well. Love your show, if you ever get up to North Dakota look me up I’m easy to find.

Very helpful even after so many years. One of the best videos on this topic. Thank you!

Once again Moe, another useful video. I especially like the grease trick to slide along the crack. I always wondered how one could fill a long crack at home (have done bullseyes with success) now I know. Thanks for sharing! -Jack

That is awesome! How can anyone give this video a thumbs down? You did a great job on the windshield and the video!

A few years ago I took my car to Safelite glass. They said they would try to repair the crack but if it didn't work I would need to get a replacement windshield from them. Guess what their repair not only didn't work but they made the crack a lot worse! I had to buy a new windshield. They did do the installl well though. After seeing your video I will be able to fix it myself next time.

My parents had that same motor home when I was a kid! Brings back some awesome memories! Never knew those kits could fix a cracked windshield, thought they just did chips!? Thanks for sharing

thank you , this video is the best Repair a Cracked Windshield video

Great repair job video. I'm going to do this.

Great job dude!!! The windshield of my Corolla 2021 has been hit by something and now there is a chip and a 15" crack!!! I started watching videos of DIY and imagined what if I put paper/tape/plastics/ or something that followed the same line of the crack and applied with a razor, a needle, and a syringe, but your idea is the best; now I know how to stop and repair the damage until I can pay $1000 DLLs for the replacement of a new one. I hope to save that amount until next month. Thank you so much.

I've had this 1.5 foot crack across my windshield for a month, luckily it's not very visible from the outside, so no cops have pulled me over. It is however getting colder and I can tell it's starting to spread, I'm 100% going to follow this video, it's so easy to understand and helpful!

Very cool way to fix your windshield. Awesome. Rick

The stuff I used to repair the windshield is linked in the video Description Above

I wanted to say thank you for posting this video!! This is the best windshield repair vid on the net/utube !!! I enjoy all your vids, you are one smart fella!!!!!👍

SixtyFiveFord, thank you. And thank you twice more! You've saved me a lot of money in just a short while. I've watched three of your vids and now know how I'm going to clean my dirty TBI fuel injectors on my '92 Chevy. I'm also going to modify my worm gear hand winch per your methods. Looks to be the exact one that you have. And now this! I''m going to get a repair kit this afternoon and get after my cracked windshield...in my '92 pickup. That's $160 +/- for the Delco injectors and $250+ on that windshield that you are saving me. You rock!

Haha my friend made a comment that there was no way it would pass inspection and you showed that sticker not even 5 seconds after. Nice method

Your freaking amazing.

I don’t even know how to thank you. Next week I’m goin on a vacation with my fiance by car and replacing glass now was the last thing I wanted. But now, thanks to you I’m saved! And I have some extra trip money of course :D

Hey, as note before, easiest video here to understand on crack repair, no wasted time.

Cool , going to try this .

I seen kits like that and I find they "Work" good as long as it's a some what fresh crack and no shit is stuck in the crack.

well that is two things that I stand corrected on. I just bought a lansky sharpening system and after years of thinking it was just a fad/gimmick for suckers with more money than sense, Im now a believer! Now,I thought the same thing about these crack repair kits. I cant believe I just spent 300 bucks on a new windshield!

Hey many thanks from the UK 🇬🇧! This is now my go to video for crack repair, excellent work and explanation 🤩🤩

Nice job! Turned out great!

Nice fix, and didn't cost much either!

just bought the kit through your link, will check home depot for the drill bit.... thank you so much for this awesome video. i think i may end up saving a few hundred dollars!

Great help! I followed your directions including what to buy and worked great. The only deviation was I used a Dremel tool with a flat bottom, 3/32 diamond bit to make the stop hole. I was concerned the pointed glass bit would start a new crack.

You mentioned about "holding constant pressure and following the crack", as well as "pushing up from inside". It would have been real instructive to see you do it in action. But alas, that's just where you sped things along making it hard to really see well. Anyhow, thanks a lot for this; And I do mean a lot!

If, I have a need for DIY fix it repairs, I'm coming to the 65Ford Channel. Thanks for all of the great information.

Love these videos, very helpful for the everyday repairs!

Got my first crack and fixed it following this video, Thanks man appreciate you.

Muy útil, muchas gracias, excelente explicación y tips para hacer bien la reparación. Saludos desde México.

Just ordered the stuff that you pinned the link to. Hopefully it will take care of the crack in my windshield. I have the exact crack as yours in the video. 🤞🏼 thank you for the video to help us, and thanks for keeping it short and to the point.

That’s impressive , worth a try before inspection for sure. Thanks for posting!

Great content and information, very helpful with the grease and pressure on the windshield. A+

Very concise and well explained, ordered stuff as shop said 6" crack and half dime size calls for full replacement of w/shield. Worried about cleaning grease off but will tackle with thanx from canada.

Snowblower kicked a stone up and we have an 11 inch crack!! As soon as temperature rises over freezing, I'm following your advice!!! Thanks!!!!

Thought I was gonna have to replace the windshield on my mustang after passing a semi dump driver and a rock made a nice long crack . This is going to be a nice DYI project to fix it and save a lot cash :] thanks

Awesome! Thank you good sir! I honestly can't thank you enough for giving me some hope that I won't have to replace my windshield. (The crack in my windshield spread over a foot on my way back from work today...so I have been extremely salty haha) I will try it out this week and I will check back in and let you/ and fellow youtubers know if it worked for my windshield.

Just bought a G35 at a discounted price because it won't pass an inspection. This is such an amazing and cheap hack. Thank you!

Thank you I was worried i was gonna have to replace but I have hope now

Thanks Man, really appreciate your video, caught a stone in Texas and was wondering what I could do about it. Now I know

If you have the option to use chapstick but choose to use axle grease you are a mad man. Thanks for the video

for sure man, I'll message you when said and done with the results. and again thank you cause all glass shops around sacramento want to replace the whole window for a 9 inch crack lol

another fine job Moe, I always enjoy your educational vids.

Thank you for the great video, really appreciate it, going to do this myself on my own windshield.

I've had a bit of success with the plastic syringe type resin injector. It never completely removed my bulleye's but did the job I wanted them to do, which was stop the crack from growing. Next time I'll try this style. Thanks for the video!!

Cool man, thanks. I have a small 4 inch crack at the bottom passenger side of my windshield. Idk of it'll work, but its worth a shot. Thanks for making a helpful video.

You got all kinds of tricks up your sleeve. Thanks for sharing your tricks..

Very informative, going to try it now, Thanks! I had a rock hit my windshield that grew to 10 inches after like a week.

Amazing! Wish I would have came across this video last month, Just replaced my windshield because of a similar crack!

Bestes Video für Reparatur einer gebrochenen Windschutzscheibe!

❤ omg thank you for keeping it simple! While still explaining every step.

I always knew that was possible with one of those kits. I just never had the chance to try it. Thanks for sharing.

I need to do this very thing. very timely. good video with great detail. thanks

Cool video, whoever thought up using suction cups in grease has got my attention, would love to see what else they came up with.

Excellent video - going to give this a shot on my Jeep and see how it works. Thanks.

thank you, great tutorial. I'll be fixing mine on monday

I watched this guy re-gas the 7 up cooler, I thought he was a fridge mechanic, I just watched him repair this crack, If I had watched this first, I would of thought he was a windscreen dude. Moral here?, you are very clever mate, I will like and subscribe. You also come across with a lot of common-sense,

65 thanks for all your great vidios ,,, !!! you have really passed on a lot of valuable info on everything ,,, thanks again ,,, your a cool cat for sure

Nice! I was gonna say, if you go inside and gently push on the windshield, you can see the liquid kind of "flow" into the crack.... But you did get there and point that out also.... With a little practice, you can get really good at that, and they will 95% disappear... the repair lasts, too... I have some I did years ago that are still fine....

As always your videos are very informative. Thank you and can not wait until the next one.

Wow!! thank you very much, you've helped me already.. been worrying about this on my windshield.

Ty for the step by step process will try it this weekend

I'm really appreciate for the link I have the crack and my windshield and always want to fixed but to Expensive !!!! Thank you so much for you video and explain very professional. 👍👍👍👍👍

A rock hit my windshield on the hwy and caused a 3” chip well this morning i noticed its gotten bigger and is not cracked about 7-8” Im going to try this today. PRAYING IT WORKS! Can not afford to fully repair front windshield!!

You saved me so much money! Super easy to understand, great video!

Nice work buddy! Saved some big bucks and passed inspection! Hope it is stopped for good!

Awesome video bro, I'm definitely gonna give this a shot this weekend. Thanks for the vid!

I can't see it. I wish I had seen this a month ago. I did a rock repair years ago, but I figured it would be a hassle to do a whole crack. Nice work.

thanks man this really helps a lot! I bought the rain X repair kit and going to try it here pretty soon.

FANTASTIC VIDEO! THANK YOU.

Thank you for the video. Labor cost-is the real reason why I couldn't fix my windshield right-away. Now, I need to travel more (length) with the suction tool. Yikes!

I honestly didn't think that moving the suction spider unit along the crack would work. But I was wrong! You make a good video- keep up the excellent work sir!

Got myself a nice one from some damn interstate work. Nice tutorial, gonna give it a try

Hi 65F, this is a terrific reference for car windows repair, clear and concise. But, I'm wondering if you have posted any follow through. Did it withstand the test of time... after so many years?! If so, please let us know to encouraged people to take a leap of faith applying your method. Thanks for sharing!

with all these grateful comments I assume this stuff is the real deal and I'll be trying it soon thanks for sharing

Sweetness. I been getting pulled over for my inspection but it’s just cause I can get it inspected cause my windsheid. Thank you I’m for sure going to try this hopefully I won’t mess up lol

Dang! Your tips and projects are slicker 'en snot...subbed