Repairing a Crack in a Dirt Bike Fender Using the ATV Pro Welder

Рет қаралды 12,713

Күн бұрын

This dirt bike fender has a very long crack. Luckily, this type of damage can be easily repaired with Polyvance’s ATV Pro airless plastic welder. Polyvance’s ATV Pro welder comes with either polypropylene welding rod or polyethylene welding rod in the round 01 profile. This fender is made of polypropylene, so selected the polypropylene rod to match.
Featured Products:
ATV Pro Airless Plastic Welder: www.polyvance.com/Airless-Wel...
Super Prep Plastic Cleaner: www.polyvance.com/Super-Prep-1/
Aluminum Tape: www.polyvance.com/Aluminum-Ta...
Chapters:
Overview: 0:00
Cleaning: 0:21
Fixturing in place: 0:33
Welding the back: 0:54
Inserting reinforcing mesh: 3:04
Welding the front: 3:44
Cosmetic work: 4:16
⚠️ Important ⚠️
- Always wear proper safety gear while working!
- The length of this video is in no way representative of the actual time required to perform a complete repair and therefore should not be used for estimating purposes.
✅ SUBSCRIBE to our channel for updates on our products and tutorials!
🌐 VISIT us at www.polyvance.com
📧 EMAIL us at info@polyvance.com
📞 CALL us at 1-800-633-3047
✉️ SIGN UP for our email newsletter at omniform1.com/forms/v1/landin...
👍 Follow us on social media:
- Facebook: / polyvance
- Instagram: / polyvanceofficial
- TikTok: / polyvance
- LinkedIn: / polyvance
Browse our products:
- Best sellers: www.polyvance.com/Best-Sellers/
- Newest products: www.polyvance.com/New-Products/
Check out Polyvance's plastic welders and welding rod:
- Nitrogen welders: www.polyvance.com/Nitrogen-We...
- Hot air welders: www.polyvance.com/Hot-Air-Wel...
- Airless welders: www.polyvance.com/Airless-Wel...
-Plastic welding rod: www.polyvance.com/Welding-Rod...
🎵 Music Credits:
"Sage" by Slenderbeats
From the KZfaq Audio Library
Narration:
Rob Rode

Пікірлер: 16

@moaski Жыл бұрын

How do you tell the difference between polyethylene and polypropylene plastics?

@polyvance Жыл бұрын

The easiest way is to look for an ID symbol. Polypropylene is usually >PP< or >PP+EPDM< and polyethylene is >PE< or >LDPE< or >HDPE. If there is no identification symbol, you can do a weld test with polypropylene and polyethylene filler rod to see which one sticks.

@moaski Жыл бұрын

@@polyvance thank you!

@polyvance Жыл бұрын

@@moaski You're welcome!

@moaski Жыл бұрын

@@polyvance I've searched all over my ATV plastics for these symbols. Are ATV plastics typically PP or PE?

@scottb7600 Жыл бұрын

@@moaski Most are HDPE, but a few are PP. Look under the rear fenders up near where the strut is mounted. They are hard to find and are usually in the dirtiest place, covered in oily grime and mud.

@user-lf9he7hy3x 10 ай бұрын

Is there a EU distributor/sales point?

@polyvance 10 ай бұрын

I'm not sure if any of our international distributors stock this particular welder. WOW Autobody Technologies in the UK carries the Mini-Weld Model 7. Where are you located? You can email us at info@polyvance.com with your details and inquiries.

@MotoERS Жыл бұрын

Please show the comparison results with brand new!

@polyvance Жыл бұрын

We didn't have a brand new fender to compare with. A local customer brought this in to be repaired. He just wanted it to be repaired; he didn't want it to be painted.

@MotoERS Жыл бұрын

@Polyvance, Is it possible to recover to brand new state ?

@scottb7600 Жыл бұрын

@@MotoERS Only if you have an an exact match for color. Which you could do using a scrap piece from another part, or if there is a hidden edge someplace you can take a shaving off of to use as filler rod....or you might get lucky with the color of the welding rod from Polyvance. Unless you are doing a restoration, most people with dirtbikes really don't care if it looks perfect, they just want the part to perform its function and not fall off, without spending a fortune to replace plastic.