Thank you. You helped this 69 year old lady to do this all by herself. I used a rubber strap wrench for the nut which made it easy.

Fast forward to 2024, I contacted Delta, actually the website directs you to Masco Canada, and they now state that this is normal wear and tear and no Warranty support. Thank-you for your video, I'll try and get the new springs and rubbers. My faucet is 16 yrs old and looks exactly like the one in your video.

12 years later and you are still helping people with water leaks. Thank you! I will be trying it very soon.

I watched many videos about how to repair my faucet. This was the best one. Exactly what I needed.

This video is priceless for some of us office dudes that are too cheap to call a plumber. After having a leaky shower faucet for over a year I feel like I can fix this over the weekend. Just have to find the right allen wrench and grab my channel locks out of the tool box. Thanks for sharing your plumbing knowledge.

Great instructions! I fixed my dripping shower head in under an hour. A 4.99 pack of new springs and washers did the trick. Without finding a how to guide I probably would have replaced the whole internal unit.

Great video! Very simple and to the point. I also wondered how to adjust the hot water mixture, so thank you for quickly explaining that as well!

Hey Al; thank you very much for your note here. Your comment about calling Delta for a replacement cartridge saved me over $90!! Thank you Sir!!

I wanted to comment and tell you thank you for showing us how to take apart the valve cartridge and replace the seals instead of replacing the entire cartridge because not all of them are available at the home improvement stores and this save me so much time and money not having to call a plumber or wait on a new part to come in the mail I didn’t even know the cartridges came apart till I seen you video. This made you clip much better then the others I watched thank you very much

This video was very helpful. I bought both the entire part for $50 and the spring and washed for $2. Spring and washer worked. Getting refund d on the other. Thx for video.

Thanks for the detailed video -- esp for showing where the springs and washers went ....helped me fix our faucet leak. Also for the explanation on the temperature control.

Thank you for taking the time to make this video-it is AWESOME!!. I rebuilt my Delta shower cartridge in just minutes with no problems with no more leaking for just pennies on the dollar. I am happy, and most importantly, my wife is happy! Thank you!

Thank you so much for taking the time to make this video!! The steps were clear and made my first time of replacing the seats and springs in a shower faucet easy and leak free :)

Thank you so much for putting your video on KZfaq. I fixed my shower leak per your video instructions without a hitch. I would not have know how to get started without your video.

Thank you for this video. Just saved me a trip to the hardware store and $40. I took apart the faucet as in the video but instead of buying new springs and washers I cleaned the assembly and stretched out the springs slightly by hand. Put it all back together and not 1 drop. Before I had a steady stream of water leaking (not just drops). Again Thank you!

Thanks for showing how to set the temperature. I might need to know this 10 years later ☺️

Thanks for the information on how to adjust the hot water temp. I was struggling with this one. Good job.

Many thanks,Al. Calm, concise directions.

Just changed my washer and spring due to a leak. Your video really helped! Just wanted to thank you for doing this awesome video and yes no more leaking from shower head!

Thank you very much!!! I wanted to learn to make my water hotter and fix any future drips, and this video covered it all. Very thorough and clear explanation! Thanks again!

EXCELLENT VIDEO!!! fixed my tub faucet for $5 (plus $3 in gasoline to drive to Lowes) and now....NO MORE LEAK!!!!!! :) THANK YOU!!!!!

Great video, the statement about using just enough pressure on the wrench and going around is. Great. Struggled for an hour before seeing the video and that was the tip that did it. Thank you.

Thanks so much for uploading this. I was skittish about opening the faucet up but your tutorial really helped. No more suffering with cold water! Thanks again man!

I had a delta shower faucet leaking and was able to fix it by watching this video. The cartridge cost 75 $ but at Canadian Tire the springs were about 5$. It put in 2 springs and faucet stopped leaking. Thanks a lot for this video. It was very helpful.

Awesome video , I just fixed my faucet and for sure it saved me some money, thanks for sharing the video.

Thanks for sharing this video! You don't have a clue how much money you just saved me on my water bill alone! I couldn't figure out how to get the handle off and after I watched this video I see I would have been in big trouble if I hadn't found you very helpful video! Not like a faucet I ever repaired before! Keep up the great work!

Thanks so much for this video. I just got through with my showers after watching this. No more drip!

Great video, thanks! Worked like a charm. I'd emphasize turning the water off first at the house - I didn't, and it was quite a show when I pulled the cartridge out. I was able to contain the flood, but it'd be easy to flood out a room or tub if not prepared. Thanks again.

Great video. Thanks for keeping it simple and great camera work too. One of the best DIY video out there!

Just so you know…..Delta doesn’t send you the entire cartridge, they send you a set of springs & seats, (washers). But, thanks for the informative video. Wish me luck!!

Thanks, this tutorial video inspired me to attempt to fix it myself, which I did -- and saved $450 (the plumber's estimate for parts and labor to replace the valve).

Hello jisung101; Yes, I always turn the water off at the main source when I work on bath or shower faucets. Thanks for commenting and have a great week! Al

Thanks for this vid! Helped me with my leaky delta faucet. So easy and quick to do...and inexpensive!

Outstanding video. Much better and more detailed than any other on youtube. Thanks for making it easy.

Very simple, you did a very good job. Thanks for creating this video.

Thank you so much for the tip on calling Delta first for replacement. I was about to but an entire rough valve and remove the cartridge.

Thank you for posting this - it was very helpful!

Great Video! Thank you for your help. The repairs went great!

This was very helpful to my family and allowed us to fix a leak. Thanks!

Thanks for making/posting this - made the job super easy to do.

Great description on how to take it apart and repair. Thanks for the help.

This save me a lot of time. Very informative and useful. Many thanks

Hello Rommel; You are more then welcome! Glad I could help! Delta has a great warranty and are an excellent faucet. I am a big Moen fan myself, but I will install either Moen or Delta depending on what the homeowner`s requests. They are well proven! Thanks very much for commenting and best of luck with the repair! Al

Great job explaining ! You saved me a service call and high water bills Thank you

You are awesome! Your short video covered so much little details about quick fixes with seal and springs and about lifetime warranty. I watched the video from Delta company and they don't even tell you those stuff. I guess they don't want you to know so they don't have to send you a free replacement parts when they could sell it to you. Thanks again!

This was the best, most concise, video presentation on this particular task that I have seen. I felt like I knew exactly what to do and I did it. It worked perfectly. Thanks!

WOW, and it is just that easy. The repair took 3 minutes at best. Thank you for the walk through.

Outstanding video, it helped me tremendously to remove a stuck cartridge. I was able to see from this video, I could use a flat head screwdriver to removed my stuck cartridge by gently prying the back of the cartridge.

Thank you for this! It helps so much!

Thanks, better info than manufacturers site.

Thanks for a quick and simple "how to" video!

Thanks, Brotherman. Problem fixed fast and easier than expected due to your video.

You saved my life; THANK YOU!

Great simple video. Thanks!

Thank you! Quick and easy fix that I would not have tried if I had not been able to see it done.

Woohoo! Thanks for your help. I was able to get the peice out and I replaced the cartridge and it works great ☺

Great video! Thanks for the tip about calling Delta to get a warranty replacement of the cartridge. I just did and mine will be here in a few days. Will definitely be referencing this video when it comes time to do the work.

Thanks for the video- saved me a bunch. $4.97 repair kit vs. $39 cartridge! Hardest part was digging the packed dirt/mud from the water cut-off @ the water tap!

Thanks very much 🙏... it helped me a great deal. I was able to change the Cartridge myself and save a whole bunch of money.

Thanks for the video! Didn't have to buy the whole assembly just the two rubbers and springs. It solved my leaky tub faucet you mentioned.

thank you so much. clear instructions and straight to the point. wonderful job brother, I could fix my leaky faucet just by replacing the springs. saved more than 100 bucks. please post more videos from your expertise. God bless

i called delta,awesome tip you saved me a trip and 37 bucks.Thank you sir!!!

This helped me fix my problem! Thanks!

Thanks for the vid. It helped me remember how it came apart to clean out the sand that got in there from a leaking pipe. 110 gals./Hour.

thanks body great job you saved my money and my time also i have learned a lot from you God bless you

Thanks very much for sharing your knowledge, this is the third one I’ve watched

hey thanks for the video i got my shower working great now and i learned something new awesome video !!!!!

This little kzfaq.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.

You made it easy to undestand. Thanks

good job, easy to understand

Thank you for making this video! I really appreciate the added info about the temperature setting gauge ( I didn't even know that existed until i watched your video)! 😌

I have the and older Delta faucet that doesn't have the cartridge but it does have the same seals. Fixed my problem! Thank you sir!

Thanks, helpful for me replacing a 2002 model, worked perfect.

Hello John; You are more then welcome! Glad it helped you out! Congrats on your repair! Thanks for commenting and have a great week! Al

Great video, what I was looking for!!

Thank you! Super helpful and well detailed.

Excellent and well-presented video!

Thanks! Simple explanation was helpful.

Thank you for this video, I thought I was gonna have to replace gaskets to get the hot water to be hotter. I did not have to go to the store to purchase parts. Thank you so much for your help.

Great job, while searching for repair I watched, another video, it was terrible and the guy was more of a hack than a repairmen, you obviously know your stuff and are out to help everyone

Thank you for your info & help! It saved m a lot of money & being on a fixed income, it was a blessing. All I suggest is for women or older ppl to use "Blaster PB" & to shut the water off before you start. It was great that you showed how to replace the spring in the cartridge. I had some Delta parts & it did the trick! I'm so happy not to see my faucet dripping! I'm sure it took me longer than most but I'm happy I did it myself! Thank you so very much!

Glad I could help and thanks for your comments. Have a great day.

Thanks for this video!! Great help!!

Great video and very helpful!

Thanks so much. This was excellent

Thank you! Very helpful video indeed!

Perfect ! Thanks! Took 3 minutes!

hello Dom; That can be the most difficult part of the job at times. I will sometimes use a torque head bit if I have stripped the inside of the screw. I will also add penetrating oil to the screw and let it sit for a few hours. Makes all the difference in the world. Before you hit the sack, turn your water off and turn your handle up to 12 oclock position and let the oil sit in there like that. Will help a lot. Thanks for commenting and best of luck with the repair! Al

I'm about to tackle this for hall bath. Thanks for instructions . I am sure it will help.

good job, easy to understand, thanks

@outoworkdreamer hey Mike; Thanks very much. I was tryimg to cover every part of the faucet. I hope I have achieved that. Just trying to make the average homeowner see the entire repair. Thanks again for commmenting and have a great day!!! Al

Thanks so very much for the tip about contacting Delta. The cartridge on my 1700 series shower broke. I went to source the part. At MINIMUM $60. Called Delta. It's on its way, FREE OF CHARGE!

Hello ForeTheLord; You are more then welcome! I appreciate your kind words! Thanks very much for commenting and congrats on the repair! Al

Thank you very much. I found it very helpful.

Hello megajig; The springs are the most important part in the repair! Stretching them will definitely make a tight seal! They may go back to normal tension in the not to distant future, but you can easily install new springs and washers! Thanks for commenting and congrats on your repair! Al

Thank you very much. I just called Delta on my 20 year old faucet and they are sending me a new cartridge!

Great video. You gave me all the information I needed to resolve my problem...Thanks

Thank you. saved me from calling a plumber and I was able to complete the whole replacement in 15 minutes.

THIS IS A GREAT VIDEO TO LEARN TO REPLACE DELTA SHOWER VALVE

soooooooooo much better than those ridiculous "expervillage" videos thanks!