Repairing a Smooth Headlight Tab Using the Nitrogen Plastic Welder

Рет қаралды 59,614

3 жыл бұрын

Many front-end collisions result in broken headlight tabs like this. Today’s headlights often feature LED bulbs, moveable elements, and sensors which greatly increase the complexity and cost of the headlight. Repairing damaged headlights can be a profitable and ecological opportunity. This instructional video shows how to repair this smooth, visible headlight tab using Polyvance’s nitrogen plastic welding system.
This particular tab is smooth on top, making it relatively easy to refinish. If the tab has gussets or ridges on top, Polyvance’s 6225 Tab Magic molding putty can make it easier to repair and refinish. Check out Polyvance’s PR-03 Headlight Tab Repair Course for even more strategies on how to repair different types of headlight tabs.
View this video on our website for products used and more information:
www.polyvance.com/video/nitro...
⚠️ Important ⚠️
- Always wear proper safety gear while working!
- The length of this video is in no way representative of the actual time required to perform a complete repair and therefore should not be used for estimating purposes.
✅ SUBSCRIBE to our channel for updates on our products and tutorials!
🌐 VISIT us at www.polyvance.com
📧 EMAIL us at info@polyvance.com
📞 CALL us at 1-800-633-3047
✉️ SIGN UP for our email newsletter at omniform1.com/forms/v1/landin...
👍 Follow us on social media:
- Facebook: / polyvance
- Instagram: / polyvanceofficial
- TikTok: / polyvance
- LinkedIn: / polyvance
Browse our products:
- Best sellers: www.polyvance.com/Best-Sellers/
- Newest products: www.polyvance.com/New-Products/
Check out Polyvance's plastic welders and welding rod:
- Nitrogen welders: www.polyvance.com/Nitrogen-We...
- Hot air welders: www.polyvance.com/Hot-Air-Wel...
- Airless welders: www.polyvance.com/Airless-Wel...
-Plastic welding rod: www.polyvance.com/Welding-Rod...
🎵 Music Credits:
"Sage" by Slenderbeats
From the KZfaq Audio Library

Пікірлер: 23

@Sam-to1zg 2 жыл бұрын

Blown up my mind with quality of repair and video.

@geoffreycartmill7717 Жыл бұрын

Excellent repair job and excellent video as always

@froglobster 3 жыл бұрын

That was very interesting thanks for the demo!

@polyvance 3 жыл бұрын

Thanks for watching!

@rolandcantu8752 2 жыл бұрын

Do any body do it here in san Antonio tx.if yes please giue your information so I could call.thankyou

@Guspech750 10 ай бұрын

Awesome video

@polyvance 10 ай бұрын

Thank you!

@csurams84 Жыл бұрын

This is amazing 👍🏾

@polyvance Жыл бұрын

Thanks for watching!

@radonvon3120 3 жыл бұрын

How much is all of this stuff to do this job

@user-oo9ey4ft9d 2 жыл бұрын

Good جيد جدا

@DanielMartinez-tg6ix 3 жыл бұрын

What is a ballpark estimate of touch time for this repair? Not counting cool down times or flash times of some steps that were used? For this particular headlamp, what would you guess was the actual repair time spent on it? I am a high school auto body teacher and am talking about repair times with my classes, this information would be great to add to explanation. Also, I was able to purchase one of the polyvance nitrogen welders with table this past school year.

@scottb7600 3 жыл бұрын

It varies depending on the complexity of the tab. Waffle tabs take longer than flat tabs and ribbed tabs fall somewhere in between. I would say touch time can be ballparked to somewhere around 1 hr average to get it looking OEM. However, bottom tabs can be done MUCH quicker because you don't need to make look pretty, just functional; probably 15 minutes for those...most of that time is spent doing prep work.

@andreybalanchuk8387 Жыл бұрын

What temperature are you running with your air welder? Seem pretty hot welding rod like this, way over 160C (PP melt point).

@scottb7600 Жыл бұрын

Yes, the Nitrogen temp is well over the melt point of PP. It has to be in order to transfer enough heat to the rod to melt it....just like welding with an oxyacetylene torch is way over the melt temp of steel. The nitrogen temp is roughly 900°F (482°C) before it exits the heater but in that 1/4 in between the nozzle and the substrate, the temp drops significantly.

@andreybalanchuk8387 Жыл бұрын

@@scottb7600 Thanks Scott, useful information! Couldn't find any Polyvance video wherer whole tab is welded back (base is broken off at the edge of headlight), is there any? It requires heating from both sides before sticking it back, looking for a safe way to do that.

@polyvance Жыл бұрын

No, we don't currently have a video like that. If you want to send some pictures of your damage to info@polyvance.com, someone can get back to you with suggestions.

@JoseDiaz-er4ww 9 ай бұрын

Looks like the repair will cost more than a new headlight? hahahahathe final job was amazing.

@polyvance 9 ай бұрын

Newer headlights can be surprisingly expensive! A shop that can repair headlight tabs can pay off the machine in just a few jobs!

@1drwnd.porsche 2 жыл бұрын

This is great but not for the regular DIY guy considering the amount of stuff one has to purchase for a 1 maybe 2 time fix.

@scottb7600 2 жыл бұрын

The video is geared more to the professional, but if your headlight costs $2000 (and there are a lot out there that do) buying all the tools to make the repair would be more than worth it. Plus, you'd have the tools to repair a lot of other things made of plastic.