Repairing the EQ6-R Pro Mount after destroying the USB port due to a cable snag

No video

Repairing the EQ6-R Pro Mount after destroying the USB port due to a cable snag

Рет қаралды 1,179

Күн бұрын

In astrophotography, cable snags are bad but some more than others. This one destroyed the USB port on my SkyWatcher EQ6-R Pro equatorial mount. Here is how I repaired the mount but I had to find a new motherboard first and that was in another portion of the world!
***************************************************************
If you would like to help me in my quest to share my love for astronomy and astrophotography, and my weather and nature channel, you can support me through PATREON ... / savannahpat
or
You can buy me a cup of coffee for only $2 a cup (I love coffee BTW) at
www.buymeacoffee.com/PatProkop
*************************************************************************
Links to my media KZfaq Channels:
∙My Weather and Nature KZfaq Channel: / @patsweathernature
∙
My Heavenly Backyard Astronomy KZfaq Channel: / @heavenlybackyardastro...
Social Media:
∙∙My Astronomy website: heavenlybackyardastro.com/
∙My Astronomy Facebook page: / heavenly-backyard-3393...
∙My Weather and Nature Facebook page: / pat-prokops-weather-an...
∙My Twitter Page: / patofsavannah
-My Treads Page: www.threads.net/@patofsavannah
-My Instagram Page: / patofsavannah
Links to some of the products on my pages that are available from Agnea Astro.
Note: I get a small commission from any of these products at no extra cost to you. This helps me to continue producing videos on my KZfaq channels
Agena Astro
@agenaastro.com/?rfsn=7734741....
StarSense AutoGuider:
@agenaastro.com/celestron-star...
Celestron EdgeHD 11" Telescope:
@agenaastro.com/celestron-edge...
Optolong L-eNhance Filter:
agenaastro.com/optolong-2-l-e...
Optolong L-Pro Filter:
@agenaastro.com/optolong-2-l-p...
Optolong Quad Enhance Filter:
@agenaastro.com/optolong-l-qua...
Background music from the KZfaq music library: "The Engagement"
Chapters:
0:00 Introduction
1:01 The EQ6-R Pro Motherboard
2:55 Replacing the Motherboard
4:35 Testing the Hand Controller
5:24 Testing the USB port
7:38 Summary & Night testing
#astrophotography,#TBAIC,#backyardastronomy,

Пікірлер: 35

@IronMan-2024 27 күн бұрын

I was talking with my friend today saying I was probably the only person who has technical problems 😅 Glad you got it fixed quickly. Clear skies are precious! Good luck 👍

@HeavenlyBackyardAstronomy 26 күн бұрын

Ha, you are certainly are not the only one. I've had my fair share of issues, but this one was my own fault. At least I was able to fix it ... for a cost. Oh, and the clouds are still floating through. Clear Skies

@dumpydalekobservatory 27 күн бұрын

Nice job Pat cable snags are always a worry now we need to wait for those pesky clouds to disappear.

@HeavenlyBackyardAstronomy 27 күн бұрын

Thank you, Yep, those clouds are certainly dippy right now, which several more nights of them on the way ... ugh! Thanks for watching my video.

@ronm6585 27 күн бұрын

Good thing that worked. Thanks for sharing Pat. 👍🏻👍🏻

@HeavenlyBackyardAstronomy 26 күн бұрын

Hi Ron, Thank you. Now that it is working, my sky has filled with clouds. Oh well. Clear Skies for you, I hope

@AstroQuest1 26 күн бұрын

Thanks for sharing this Pat and am glad you were able to fix it. I have had cable snags as well, fortunately I just ruined the cable. Cheers Kurt

@HeavenlyBackyardAstronomy 26 күн бұрын

Hi Kurt, Yep, that is what usually happens to me ... I ruin the cable, but, as you can see, this time I wasn't so fortunate. Thanks for watching, Kurt.

@douglasfleming1 27 күн бұрын

😮 Definitely saving this video in case this happens to me!!! Thx, Pat.

@HeavenlyBackyardAstronomy 27 күн бұрын

Hi Doug, Well, I hope you never need to look at this video again, but I am glad I now have it available in the event you need it. Clear Skies

@SimonsAstro 27 күн бұрын

That’s awesome Pat, glad it works again! You’ve given me the inspiration to do this now😀 I have a motherboard for my EQ6R Pro, it’s been sitting there for months, but I’ve not done it. The mount works, it’s just the led light doesn’t come on anymore, but because the mount works, I’ve been reluctant to do it! Only problem is, I don’t have any paperwork with the new board! I’m sure I’ll work it out🤣 Clear skies!

@HeavenlyBackyardAstronomy 27 күн бұрын

Hi Simon, Heads up ... I had a devil of a time pulling the RA and DEC pins out of their sockets. Once out, they went into the new Motherboard easily. When you do get around to it, just do what I did ... take a picture of the MB before you pull out the connectors. That way, you'll have a reference source to fall back on. Clear Skies

@jeffculp2197 27 күн бұрын

Thanks for sharing...it's good to know I wasn't the only one who had this happen as well. My issue was one night the scope didn't do its meridian flip and damaged the female USB socket on my 2600MC Pro camera. I ordered a new USB socket and soldered in the replacement. Over time I had to replace the USB female socket on my EQ6R Pro because it became unuseable due to wear (I bought the EQ6R used), but I didn't have to replace the plate or motherboard - just the USB receptacle. Not the greatest soldering, mind you, but it still works on both devices. Whew! 🙂

@HeavenlyBackyardAstronomy 27 күн бұрын

Hi Jeff, Oh, I wouldn't want to de-solder the USB port, remove, then insert a new one and solder it in. But, in your case, it might not be pretty, but it works, and that's the bottom line. I have had snags in the past, but the USB cable usually was the only casualty, not the actual port. Clear Skies.

@robvandenwijngaart988 27 күн бұрын

Hi Pat, I had to replace my board to of my EQ6. Mine didn't had a USB but was with a serial port connecter. I had replaced it with a board with USB connector. Much better than with a this special serial to UBS cable.

@HeavenlyBackyardAstronomy 27 күн бұрын

Hi Rob, Oh yes, the USB connecting is much better than those old serial ports. I also ordered a special "Pegasus Astro EQDir USB Stick Adapter for EQMOD with RJ45 / DB9 Connectors" that plugs into the Hand Controller port. I will try that out and hopefully, will be a backup in the event I "screw up" again ... Ha! Clear Skies, Rob

@AZ4Runner 27 күн бұрын

Great Job Pat!! dodged a bullet for sure! CS.

@HeavenlyBackyardAstronomy 27 күн бұрын

Thanks Jason. Okay, just how hot is it there now???

@AZ4Runner 27 күн бұрын

@@HeavenlyBackyardAstronomy 114 today but gonna be cooler tomorrow only 109 😁. lows in high 80s.

@HeavenlyBackyardAstronomy 26 күн бұрын

Ouch! Too hot for me. We've been in the low to mid-90s but with the influx of humidity, it feels more like around 105. Next week, our heat index will be flirting with 110. With all that humidity in the air, it makes for bad seeing, even if the sky is clear. I try to work the lawn/garden each day before it gets too hot. usually quitting before 2 pm.

@AmatureAstronomer 27 күн бұрын

Nice work.

@HeavenlyBackyardAstronomy 27 күн бұрын

Thank you

@donondre7314 13 күн бұрын

Unbelievable what they charge for the replacement board. Even if the PCB is not produced at crazy high volumes like other consumer electronic devices, this still consts mayby around 15usd to manufacture + the aluminum plate. But I'm glad it's working again!

@HeavenlyBackyardAstronomy 12 күн бұрын

Thank you, Don. I fixed it just in time for several weeks of clouds and rain. Oh well. Thanks for watching my video and your comment.

@cliveroberts415 26 күн бұрын

Good result Pat. I had to replace my motherboard on the HEQ5. Hopefully you won't need to do it again but just in case Rother Valley Optics here in the UK stock motherboards and spares for most Skywatcher mounts and they are happy to give advice on fitting if needed.

@HeavenlyBackyardAstronomy 26 күн бұрын

Good to know, Clive. Thank you. Now, about those clouds...

@newbee1016 26 күн бұрын

You are lucky that you only damaged one board, I blew two one after the other. I have the same mount, and I was unfortunate to connect up a faulty cable (new). I sent it to SkyWatcher for repair (under warranty) when it returned I connected everything back up and the same thing happened, this time it cost me, and I was lucky that they had one left in stock. When I buy cables I often buy 2 one for spare so to speak, but this spare cable is hidden away never to be used. Cheers Robert Aust'

@HeavenlyBackyardAstronomy 26 күн бұрын

Hi Robert, Wow! You blew out two motherboards? I didn't know a faulty cable by itself could do that. When it comes to USB cables, I have acquired numerous ones in different length, USB 2 & 3, USB A, and USB C. I would hate to shut down a rig for a lack of a cable. Clear skies

@newbee1016 25 күн бұрын

@@HeavenlyBackyardAstronomy Unfortunately it was a made up cable, it had the standard USB male A one end and a RJ-45 the other, purchased from a reputable astro dealer. I was unaware that the cable was the fault when the first board went, but when the second one went then I disposed of the cable, and the spare. Originally the mount was the EQ6-R but while it was at SkyWatcher for repairs they were kind enough to up grade it to the pro version with the USB port. Cheers Robert

@HeavenlyBackyardAstronomy 25 күн бұрын

@@newbee1016 ... I just acquired the Pegasus Astro EQDir USB Stick Adapter for EQMOD (on a 1-meter cable). It does have a special chip embedded within the USB plug for communication. I wanted to see if that would work as well, in the event I damaged the USB port again (you gotta know me). Well, it works but the baud rate needs to be changed from 115200 (from the USB connection) to 9600 bits per second ... both in the port setting on the computer and in EQMOD for it to work. Well, I guess you learn something new every day. Clear Skies, Robert

@Felldisulfide 21 күн бұрын

I just googled breakaway cables. Looks like they make them for gaming controllers. I guess I can see that - I always know when a game's not going well for one of my kids... We could use something like that for astro gear.

@HeavenlyBackyardAstronomy 20 күн бұрын

I've been looking at short extension cables to use as just that. Hopefully, I won't need it.

@CaptOverShoot 22 күн бұрын

Hi Pat, I am building a rig to use from inside the house using NINA. To simplify everything was thinking that I won't need a USB Hub to connect everything on the scope if the WiFi Micro PC I use has 5 USB ports. Do you think that will work?

@HeavenlyBackyardAstronomy 20 күн бұрын

Well, you will still need to connect your camera, guidescope, and other accessories, such as a focuser to the mini-computer at the rig. If the mini-computer has enough ports, then you won't need a hub. Also, if your mount has WiFi, you can connect to it that way, otherwise you will need another USB port to connect it. Does that make sense?

@CaptOverShoot 15 күн бұрын

@@HeavenlyBackyardAstronomy Yes it does, thanks for your help, I have LeME Quieter4C winging its way to me now. I will see how well it connects using wifi and take it from there. cheers