Replace Brake Fluid for Mercedes S550 奔驰S550更换制动液

No video

Replace Brake Fluid for Mercedes S550 奔驰S550更换制动液

Рет қаралды 10,330

4 жыл бұрын

If you think my work is worth it www.paypal.com/donate?hosted_...
Welcome to leighsr.com to discuss.
There is a reference for replacing brake fluid every two years on Mercedes maintenance booklet. I decided to replace it even the brake fluid containing water 0%.
Brake Power Bleeder: ebay.to/2Ha97tT
Mercedes Benz Brake Fluid: ebay.to/2Sw2zLt
Brake Fluid Tester: ebay.to/2SaPdoS
Husky Tool Chest: ebay.to/2NPTETu
Dewalt DCF899B Impact Driver: ebay.to/2SfLvKL
Mercedes Lug Socket: ebay.to/2UASDmv
奔驰的保养手册上要求每两年更换刹车液。换吧，即使刹车液的依然处于良好的状态（含水率0%）。

Пікірлер: 62

@Mirarty 4 жыл бұрын

There are many DIY videos on youtube how to flush brake fluid. But this is the only video showing how to do it right! Excellent job, thanks for making these videos.

@LeighSr 4 жыл бұрын

You're welcome and I'm happy you like my video❤️，Yes, I don't like talk too much, just hope the audiences feel working with me while watching my video, instead I do my job with soliloquy.😄

@Mike-ht1ou 4 жыл бұрын

Learned something new again, never knew there was a stud pin thats available to reinstall wheels. Excellent video Mr.Leigh

@LeighSr 4 жыл бұрын

Thank you for your praise! And yes, there is an alignment bolt in the vehicle tool kit under the bottom of the trunk floor. That bolt makes working easily for installing the wheels.

@Peter_87 Жыл бұрын

把工作做到艺术的极致。棒🎉

@RMC777 3 жыл бұрын

看李兄视频过程享受！

@jayzhao4990 3 жыл бұрын

During the epidemic .learn to maintain the car by yourself.點讚啦～老師父Thank you for sharing.

@LeighSr 3 жыл бұрын

謝謝❤️

@gavejoke Жыл бұрын

Luxurious way to change brake fluid❤

@Wcchui 2 жыл бұрын

I saw another video where the youtuber drilled a small vent hole in the collection bottle. As such, no pressure is built up after the breed valve so that no spill when disconnect the hose.

@LeighSr 2 жыл бұрын

Yes, after I realized the problem, I drilled the vent hole into the bottle in my next video of replacing brake fluids. kzfaq.info/get/bejne/fbeDarSjvtuzfX0.html at 2:08

@petersun5788 4 жыл бұрын

希望出更多的好视频，爱自己修车的奔驰用户

@LeighSr 4 жыл бұрын

大家的需求就是我努力的动力。

@petersun5788 4 жыл бұрын

非常好👍，太棒了👏🌟

@cd8431 3 ай бұрын

Senior Leigh, have you ever replaced the ABC fluid on the W221? Please post a link if you have. Thank you

@lyz5894 3 жыл бұрын

拍的非常好，关注了，就是没想到之前都用扭力扳手，最后上轮胎其实电动工具已经打很紧了，最后扭力扳手有可能没派上用场，好几个朋友这样做，最后拆胎，螺栓断了。。。

@LeighSr 3 жыл бұрын

谢谢您！保持正确的扭矩非常重要。

@IamLuisAlvarez Жыл бұрын

Wow great Job!

@andrzej5484 10 ай бұрын

The video is great, I'm about to change the fluid as the service is coming up D. What machine did you use to drain the fluid and with what Nm did you tighten the breather valves?

@malekn.4490 4 жыл бұрын

I love the s550 w221 i have a 2013 model

@LeighSr 4 жыл бұрын

W221 is my most favorite S-class.

@malekn.4490 4 жыл бұрын

Senior Leigh me too i love it! Mine is black like yours but yours has nicer interior haha

@MercedesMechanic 3 жыл бұрын

did you do the brake fluid change yourself on your 2013? If so, did you suck all the old fluid out of the reservoir or did you leave some in to prevent air from entering the system?

@malekn.4490 3 жыл бұрын

@@MercedesMechanic me do brakes ? Oh no I won’t those cars are so complex I feel and I like to keep mine factory so I always take her to the dealer .’costly yes but hey she’s my babe and she be spoiled 😳🤣😭🤤😈😜😍🤣

@anthonywilliams4100 3 жыл бұрын

I drill a hole in my catch bottle and push the hose in to 1/4 in from the bottom of the bottle, then fill it enough to just cover that outlet hose. Completely sealing it let's pressure build in the escape side, and give you the spray when you disconnect from the bleeder screw. Good work though. But no cycling of the ABS?

@pfsantos007 4 жыл бұрын

Nice video.

@mikimiki195 Жыл бұрын

Good video only thing I would say he could have done better on drain side you need have extra hole for pressure release if you don’t do this you will have fluid squirt out like he had on first wheel 🛞 Air have to have place to release 👍🏻

@gcssat 4 жыл бұрын

Another great lesson and wonderful video presentation. I had a question, how long do you wait to do the brake flush? Every 20k as per MB service guide or sooner? How many miles did you have on the fluid you extracted?

@LeighSr 4 жыл бұрын

Thank you for your prise! ❤️。For flush time, depend on brake fluid color what come out from the tubing. I waiting it until the fluid color light like the new fluid. You might see that in the video, there some different color between beginning and ending of fluid. Right rear would be longest time to waiting, and the right front would be shortest. For duration of replacing the brake fluid, I followed maintenance booklet of Mercedes for 2 years or 20K miles, even the brake fluid still in good conditions. Also no necessary shorter the replacing miles.

@wenlin8169 4 жыл бұрын

如果在视频中添加一些关键数字文字会更好比如需要多少毫升多少瓶多少扭矩等等一些关键数字一些粉丝看了就明白要不然跟走马观花一样流程看完了没明白需要什么东西什么参数谢谢大神我会持续关注

@LeighSr 4 жыл бұрын

WEN LIN 谢谢您的点评🙏，我在努力，请移步 leighsr.com ……我正在那里耕耘。

@Haloarmando69 Жыл бұрын

Does the emergency brake have to be released before you start the job?

@gavejoke 10 ай бұрын

How many liters you need please

@gobau 2 жыл бұрын

You use Motive breeder to take out old break fluid then clean inside the bottle then reuse it to put new break fluid?

@LeighSr 2 жыл бұрын

Nope, I only use the Motive breeder fill new brake fluid. To extract old brake fluid from the reservoir, by different power, like mouth 😂

@sc225 2 жыл бұрын

For 2010 c350 w204 is that also 14 Nm too ?

@hamzayagan 3 жыл бұрын

Don't you need to use star diagnosis for this procedure ?

@LeighSr 3 жыл бұрын

No, no necessary. I followed the WIS did this work.

@M.B.S_500 2 жыл бұрын

Professinal

@CM-tc4ny 3 жыл бұрын

Excellent video!!! Most appreciated. What are the W212 caliper bleed nipple torques specs?

@LeighSr 3 жыл бұрын

Thank you and 14Nm for W221 at 0:41 18Nm for W212 on kzfaq.info/get/bejne/fbeDarSjvtuzfX0.html

@joela415 Жыл бұрын

what size is the bleed screw ?

@jiefengchen1697 4 жыл бұрын

一如既往的好。为了拆管子的时候不会喷洒，接废油的瓶要开个透气的孔这样就不会在瓶内蓄压。

@LeighSr 4 жыл бұрын

谢谢！是的，我后来钻了一个透气孔，在另一辆车的换刹车油的视频中就会看到了 kzfaq.info/get/bejne/fbeDarSjvtuzfX0.html

@jiefengchen1697 4 жыл бұрын

@@LeighSr Nice！

@mkwan1 3 жыл бұрын

@@LeighSr 老李，那个刹车油腐蚀性强，如果万一溅到车上其他零部件，可以马上用水冲洗掉。供参考。谢谢您的视频

@LeighSr 3 жыл бұрын

@@mkwan1 谢谢提醒🙏

@rhtzeng3764 4 жыл бұрын

請問需要買幾罐Brake Fluid?

@LeighSr 4 жыл бұрын

在視頻的51秒，您可以看到剎車系統的總容量是0.5升，所以您買一罐一升的就夠用了。

@rhtzeng3764 4 жыл бұрын

@@LeighSr 謝謝,看你的視頻收穫良多

@MercedesMechanic 3 жыл бұрын

do you take out all the old fluid from the reservoir?

@LeighSr 3 жыл бұрын

Yes, that's old fluid with moisture should be replaced at all.

@SDMF5000 Жыл бұрын

What value did you torque the Bleeder bolts to?

@LeighSr Жыл бұрын

14Nm, see 0:41

@SDMF5000 Жыл бұрын

@@LeighSr Thank you.

@yunbow5630 3 жыл бұрын

麻烦您怎么买的检测工具啊

@LeighSr 3 жыл бұрын

MB star SD connect C4: ebay.to/2NlYWWO 我是在这买的

@yunbow5630 3 жыл бұрын

@@LeighSr 程序自己去装在电脑上吗

@LeighSr 3 жыл бұрын

@@yunbow5630 由卖家远程安装，需要唯一的激活码，这是包含在购买价格里的。

@yunbow5630 3 жыл бұрын

@@LeighSr感谢已经订阅