Replace old Fluro Batten lights with these NEW CHEAP SUPER BRIGHT LED LIGHTS! // How to install them

Рет қаралды 33,121

Жыл бұрын

CAVEAT: This video is purely for your entertainment and maybe research purposes. Get an electrician to do your work if you lack electrical confidence.
Heed the warnings I've given about electrical work throughout this video.
Did you know that you can replace your old fluorescent lights with new, brighter LED lights? In this video, I'll show you how to install LED lights in your home and replace your old fluorescent lights.
I purchased these from Ebay.
SUPPORT:
If you want to support my work - I am very grateful. Here's the link...
ko-fi.com/jelbuilder
#diy #ledlights #howto

Пікірлер: 13

@TheDreamCreamz 8 ай бұрын

Great Video mate! Good insights into keeping the electrical jobs safe.

@MrConnormoriarty 10 ай бұрын

Are these able to connect side by side? I have barbershop and want to run in a beam effect! The ones we have flicker with photos and videos so you making this gives me hope 🙏

@theman5946 Жыл бұрын

That was very helpful thank you

@jelreviews Жыл бұрын

Glad it was helpful!

@saneauto 9 ай бұрын

I used to solder an heat shrink em the way you did till recently I bought a kit of heat shrinkable butt connectors with solder inside them. One step and done.

@jelreviews 9 ай бұрын

Yes, I've seen those recently too. I'll need to get me some. Thanks for the tip!

@akira5982 Жыл бұрын

Just remember peeps its illegal to do any electrical work on ur house in oz so if ur not competant call a sparky 😉

@Decebal825 Жыл бұрын

wonder i these 6 dollar lights really 40W? anyone know

@godofnation Жыл бұрын

ive got one of these any how the hack do you takem off? tried all and feels like its going to break itself or the ceiling :/

@jelreviews Жыл бұрын

I've found the clips are very bendy... so all I do is pretty much pull down on one side and off it comes.

@akira5982 Жыл бұрын

Get a butter knife or something as flat & push the side of the bracket 😉

@godofnation Жыл бұрын

nevermind bois, there was some round rubbery seal and I could takem off. surprise !!! it was screw hole. unscrewed both sides and pulled it down. haha cheers for the tips tho

@wardfiction5693 8 ай бұрын

Sadly these lights are not getting so cheap these days and I have been researching and working on this lights. I have them all over my home and one thing I found out is that they run the lights hard, so they don't last as long as they should. The newer and more expensive ones seem to have better LED chips, but they are still run very hard. Replacing a resister on the transformer to a better value would make them run better, but thats complicated. Just be aware. They are very good lights though...