Replace Toyota Camry Timing Belt kit

Replace Toyota Camry Timing Belt kit - (1997-2008)

Рет қаралды 35,297

Күн бұрын

If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/41ij80e
Ratchet wrench set: amzn.to/46JP0g5
😎👍
1. Replace Toyota Camry battery
• Replace Toyota Camry b...
2. Replace Toyota Camry headlight
• Replace Toyota Camry h...
3. Replace Toyota Camry shift cable
• How to replace Toyota ...

Пікірлер: 106

@DIYwithMichaelBorders Жыл бұрын

If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/41ij80e Ratchet wrench set: amzn.to/46JP0g5 😎👍 1. How to replace Timing Belt - (PART 2) kzfaq.info/get/bejne/d8-AgNx_25irdZs.html 2. Engine died/stalled on highway - Common causes kzfaq.info/get/bejne/iM12n86i287Sm4k.htmlsi=2eNJYMN3CQ0IL4Sn 3. Replace Toyota Camry battery kzfaq.info/get/bejne/qK5-oKqr2d-tf30.html 4. Replace Toyota Camry headlight kzfaq.info/get/bejne/opiflKSgy5nTqX0.html 5. Replace Toyota Camry shift cable kzfaq.info/get/bejne/mrZojc2TyJm3knk.html

@joerubi03 5 ай бұрын

Excellent video and explanation of the timing marks. I would not have attempted it prior to your video, excellent camera work!

@DIYwithMichaelBorders 5 ай бұрын

@@joerubi03 Good morning ☕️ we appreciate that. That’s awesome you took this project on as a DIY project, definitely saved yourself a lot of money. 😁👍

@oyondi 6 ай бұрын

I just replaced my water pump and timing belt for my 2001 Camry. I followed your video and so impressed how it turned out. You have detailed instructions and made it easy. My fav quotes “do not cross thread “ and “don’t rush it”. Thanks

@DIYwithMichaelBorders 6 ай бұрын

Thanks for watching, and that is very kind of you to say. And yes, cross-threading bolts and rushing is a no-go on our channel. 😁 Awesome job making it a DIY project, you deserve that earned rewarding feeling. Great to hear it turned out well. Looking forward to 2024, many more helpful videos to come. 🧰

@adamfrbs9259 16 күн бұрын

I legit used your link because I want you to get a piece of the affiliate link money. This was extremely helpful. I am now just knowledgeable enough to be dangerous. Lol. (Enough to try this, such a waste to junk the car when all it needs is a timing belt)

@DIYwithMichaelBorders 14 күн бұрын

@@adamfrbs9259 We appreciate you watching and writing us. We feel the same, it would be a waste of a good car. Replacing the timing belt and getting the car back on the road is the smartest route to take! 😁👍🧰

@adamfrbs9259 12 күн бұрын

@DIYwithMichaelBorders this is the big weekend for the swap. We'll see how I do, most technical thing I've ever done is swap a gas tank on an old Ford van, had to get that stupid Ford fuel line tool for that one.

@adamfrbs9259 11 күн бұрын

@DIYwithMichaelBorders dang, did it all, wanted to fire the first second, like a carbed car that wouldn't fire up. Then nothing, no almost fire or anything, just turned over n over. When you turned it around from the harmonic balancer with the wrench, were you holding it back from the compression making it want to jump forward as you turned it? That's what it kept doing to me, jumped forward, then the belt would lose some tension until I turned it some more. It seemed odd for the belt to lose as much tension as it did at those points when it would jump forward. That make sense? Is that normal?

@DIYwithMichaelBorders 9 күн бұрын

@@adamfrbs9259 Absolutely! 😎👍 How did it go?

@DIYwithMichaelBorders 9 күн бұрын

@@adamfrbs9259 Thanks for the follow up. There’s a minor amount of room for error however not much at all. If we read this correctly, you are all finished and back up and running, correct?

@elgatogordo9523 2 күн бұрын

Great video 👍 I would of replaced all the seals that were accessible during timing belt replacement. Ask me how I know? 😅 When I was younger. I replaced a used engine on a 93 Camry without replacing the seals and orings. Unfortunately, the oil pump seal started leaking 😬 Present day: Helping a friend replace a used engine on a 97 Camry for his daughter. I told him to buy a re-ring kit so we can have a fresh engine that will last a long time and no leaks. 😊

@LouisCapps-p3z 8 күн бұрын

Good job brother. I am a Toyota specialist. My strength is in older models. I am getting ready to do my water pump. 👍

@LouisCapps-p3z 8 күн бұрын

On my 01 Camry

@peppercorn8451 3 ай бұрын

Thank you so much for this video. By far the best instructional video on this topic - everything from the narration, to steady and clear filming, and tips were really appreciated. This video was my main guide and reference for the entire job - and I now have a fantastic running car! It took me about a week and a few days more to do the job after parts arrived...and there were times when I was almost about to call a mechanic, but in the end everything worked out well, so I'm really glad I stuck to it (I learned heaps as well)! For the harmonic balancer removal, I had to order in a really heavy duty harmonic balancer socket to break free the bolt (with heat and penetrating oil). For the timing belt installation, mine was 1 tooth off and/or incorrect timing as the crankshaft pulley moved while putting the belt on (and I didn't discover it till later). So I ended up mainly using the markings on the oil pulley to set the timing (the pulley behind the harmonic balancer; there's a small notch at about the 11.30-12 o'clock at the back teeth which lines up to a small indent on the housing behind). This was easier than using the marking on the lower timing belt cover as I could insert the crankshaft bolt and spin it and align (if I knocked the pulley out of TDC) instead of putting the cover, the harmonic balancer, and then bolt back in and checking. So that solved the problem of being at TDC before/after installing belt as I could easily verify it before putting everything back on. To solve the problem of being off by a tooth (and thus when moving 2 rotations, everything is out of order), I just had to make sure all the tension was on the side opposite to the tensioner pulley (i.e. the belt between the camshaft sprocket and water pump was tighter than the side between the camshaft and oil pump and crankshaft sprocket...because when the tensioner pulley bolt was loosened, that side would become tight as well). If the belt isn't broken, it's good to make matchstick markings on the crankshaft and camshaft sprocket to make sure the belt isn't off by a tooth (and also verifying by spinning 720deg / 2 revs). In the end, got it on, but the crankshaft pulley was a few degrees off TDC however camshaft was spot on. That was the best I could manage. I ended up doing camshaft seal, crankshaft seal, oil pump seal, oil pump o-ring while there. The best way for doing the seals was using a screw driver approaching from the bore and prying it out that way. A small hook tool was also useful to fish out the seal after making an indent. To put the seal back in: for camshaft seal, press the old seal onto the new seal after pushing it in (making sure the lip hasn't come up - broke my genuine Toyota seal that way, had to use an aftermarket one to avoid waiting), reverse the camshaft sprocket and with the bolt, slowly screw in. For crankshaft seal: put it carefully in first with slight rotation. I used a pvc pipe at this point to edge it in. Then I finished it with a 3/8" extension and small mallet. For oil pump seal: first remove the oil pump (7 bolts), then lock it in a vice grip and remove. Changed the spark plugs while I was at it as well. Went to turn it on and...nothing. Would crank but wouldn't start. Verified it wasn't the battery (charged up previously + used a powerbank jump starter). Checked my connections (only a few for this car). Pretty sure it wasn't the timing as I had verified it many many times with the cover off. Had to use Chrisfix's car won't start video to figure it out (fuel, air, spark, etc). What worked was twisting the key to ON for 10 seconds to let the oil pressurise, and then start the car. Car finally was able to weakly start after two days and after that no problem. I think because parts took 1.5 months to arrive, all the fuel and oil stuff had drained so it was hard to start by just cranking immediately. Finished everything off with another video from you: hard/sticky gas pedal. Cleaned the throttle body (plus wiped the throttle cable with denatured alcohol)...and everything is running so smoothly now. So... Big thanks! Have subscribed and relaxing after everything done by watching your latest vid on how to cook up a quarter cow. Now that's some darn good topic coverage there!

@menasakarjalian6965 8 ай бұрын

Replaced the timing belt on my 98 Camry. The job didn't go as smooth as in your video but your video was very helpful. Thank you!

@DIYwithMichaelBorders 8 ай бұрын

Good morning ☕️ Great to hear our video was helpful, we are honored to hear that. Awesome job making it a DIY project. 🧰

@user-cc4sj1lw2d 13 күн бұрын

Very good video. Thank you. GOD BLESS YOU.

@DIYwithMichaelBorders 13 күн бұрын

@@user-cc4sj1lw2d You are very welcome, GOD BLESS YOU.

@gregbryan6465 7 ай бұрын

Very clear and thorough instruction. Thanks for sharing your knowledge.

@45AMT 5 ай бұрын

Oil pump seals, Crankshaft seal and Cam seal was leaking. Why not replace these inexpensive parts while you're doing the job?

@DIYwithMichaelBorders 5 ай бұрын

Good morning ☕️ not a bad idea at all. We appreciate you sharing your thoughts, always welcome here on our channel. 😁👍🧰

@KhomisanisonnyboyMapfumari 4 ай бұрын

Hi Diy with Michael borders thanks for your video it's helpful your English is clear you explained very well i wish you can do more video with this model of car such as a clutch disc and clutch plate replacement thanks a lot man

@DIYwithMichaelBorders 4 ай бұрын

That means the world to us, thank you. We do our best to get the DIY community the important info they need without wasting their valuable time. Any and all feedback is welcome here on our channel. 😁👍🧰

@TheBigfoot567 6 ай бұрын

How many hours is this job at a mechanic shop? Looks more than I could handle. Great, clear, instructional video. Thx!

@DIYwithMichaelBorders 6 ай бұрын

Thanks for watching. It may require 3-4 hours at the absolute max. The shop will have all the tools and parts handy to complete it rather quickly. Shop times and expertise may vary of course. 👍

@TheEnteFamilyVlogs 6 ай бұрын

i love this channel now. very helpfull and detailed. thanks dude

@fernandohernandez9802 5 ай бұрын

Hey Great video, Just wondering... Why do you turn the engine an additional 7/8 turn to line up with marker on plastic cover? What purpose does this serve?

@DIYwithMichaelBorders 5 ай бұрын

We appreciate that. It helps prevent shock to the gears and additional parts. Helps lower risk-of-damage during the first engine start and first rotation or all interior engine parts inside cam and valves. Also adds a bit of reserve to allow belt to properly set. 🧰

@freckardinal1177 2 ай бұрын

26:14 do not drop these nuts😂 thanks for your video

@DIYwithMichaelBorders 2 ай бұрын

Thanks for watching. 😁👍🧰

@bigdude8351 5 ай бұрын

I just got this job done at my mechanic, wish I would have seen this first might have tried it myself to save $800 haha. Quick question, after the mechanic did this job, there is a light squeak from a belt not sure which one when I turn the wheel hard to the right or hard left, would that be caused by changing any of the belts? I know they changed the timing and other belts.

@DIYwithMichaelBorders 5 ай бұрын

Thanks for watching, $800.00 is too terrible of a price for a full Timing Belt replacement however we agree, making it a DIY project is a great option. As far as the squeaky belt, it’s likely due to new belt and as the new belt settles in, it will go away soon. 🧰

@joaquinaguirre2976 5 ай бұрын

Than you Mr. Borders.

@DIYwithMichaelBorders 5 ай бұрын

Good morning ☕️ you are welcome. 🧰

@EseParalistDeAhi 9 күн бұрын

which engine is this? is very similar to the 3SGE but is it not. either way it will help me fix my Celica

@DIYwithMichaelBorders 9 күн бұрын

@@EseParalistDeAhi Thanks for watching. This is the 2.2L

@walterphillips9950 3 ай бұрын

Superb video. Nicely done

@DIYwithMichaelBorders 3 ай бұрын

We appreciate that, thank you. 😁👍

@eddiepearce5307 7 ай бұрын

good video Rachet/Wrenches say those year Camry were NON INTERFERENCE engines sure timing needs to be correct is that true? probably since broke belt did not destroy

@DIYwithMichaelBorders 7 ай бұрын

You are welcome, thank you. The 99 Camry engine is non-interference. 👍 Let us know if you have any questions. Looking forward to 2024, many more helpful videos to come. 🧰☕️

@Maplecook 6 ай бұрын

Idler pulley question: instead of installing the spring first, and then forcing the pulley downwards -- against the force of said spring -- would it be okay to install the belt first, and THEN the spring?

@DIYwithMichaelBorders 6 ай бұрын

Good morning ☕️ thanks for reaching out to us. We haven’t performed it in that order before…can’t really give you a confident answer…makes us curious though…🤔 If it was us, we would perform as shown in this video being that following our manual worked well. Keep us posted. Let us know if you have any questions. 👍🧰

@Maplecook 6 ай бұрын

@@DIYwithMichaelBorders Okay, thank you. Of course, the manual is the the correct way...but having said that, my common sense just says, "Why fight the force of the spring?"

@DIYwithMichaelBorders 6 ай бұрын

@@Maplecook 😁👍☕️

@berrywin 5 ай бұрын

Sell a Toyota Camry of these year models; are you crazy!. I had mine for 23 years now. Wouldn't change it to anything! It is a really DIY friendly car and dependable as no other car! And it is really stylish according to many young people I met. Not as ugly as the newer Asian made cars!

@DIYwithMichaelBorders 5 ай бұрын

Thanks for watching and sharing your thoughts. You are spot on, the 90’s Toyotas are the BEST! 🧰

@kryptondefender 4 ай бұрын

Excelente video 📸

@DIYwithMichaelBorders 4 ай бұрын

Thank you, we appreciate that. 👍

@joerubio3391 Жыл бұрын

Excellent video 👍

@DIYwithMichaelBorders 11 ай бұрын

Thank you. 😎👍

@jezzter4106 Жыл бұрын

My belt snapped while driving. Does this mean my crankshaft is out of time? That being said does the crankshaft pulley still have to be removed with the notch on 0° TDC? Also i cannot remove the harmonic balancer bolt without it turning and misaligning the notch from the timing mark. How do i keep it from misaligning while unbolting the bolt?

@DIYwithMichaelBorders Жыл бұрын

Thanks for watching, your engine is ok since it’s a non-interference engine…that’s if your engine is the same as ours. You will actually realign engine later in the project as you’re putting everything back together. You may need to apply heat directly to balancer bolt however be extremely careful not to melt anything that isn’t supposed to be touched with heat.

@bernardocisneros4402 10 ай бұрын

If you have an impact gun, you can take off harmonic balancer bolt without crankshaft moving.

@elcondedelamedialunaymonte4619 8 ай бұрын

Thank you ,good job.

@DIYwithMichaelBorders 8 ай бұрын

Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. Thank you kindly. Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

@dunnerdude3408 8 ай бұрын

When and how did you torque the harmonic balancer bolt to 80 ft lbs?😮

@DIYwithMichaelBorders 8 ай бұрын

Thanks for watching, if your manual states 80ft lbs, we recommend it.

@JaspreetKaur-fl3ng 5 ай бұрын

Very well explained

@DIYwithMichaelBorders 5 ай бұрын

Good morning ☕️ thank you. 😁👍

@RagingBull721 28 күн бұрын

How much coolant does it require

@DIYwithMichaelBorders 25 күн бұрын

@@RagingBull721 Thanks for watching. You should only need to purchase a 1-gallon pre-mixed container of coolant. If interested in purchasing coolant, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/4dr7kxR 😁👍🧰

@Charlie_Toben Жыл бұрын

How do you tighten the 19mm bolt on the harmonic balancer without the flywheel turning?

@h0udinl Жыл бұрын

Put it in gear

@berrywin 5 ай бұрын

@@h0udinlI'ts an automatic!

@ryanferguson110 3 ай бұрын

Take your spark plugs out next time and you won't have so much of a problem spinning the engine over

@DIYwithMichaelBorders 3 ай бұрын

Good morning, thanks for sharing. ☕️

@sherrieann79 Жыл бұрын

I got it! Thank you!!

@DIYwithMichaelBorders Жыл бұрын

Thanks for watching. 🧰

@JackMeyHoffer562 7 ай бұрын

Hello, will this work for a 1999 Lexus ES300?

@DIYwithMichaelBorders 7 ай бұрын

Good morning ☕️ The setup will be a bit different as to the parts you remove to gain access to the belt for replacement however it will hopefully get you more familiar with the procedure so you can plan out your project accordingly. In the meantime, we are always here to help answer questions. 👍🧰

@morenikejohnson9419 Ай бұрын

What is the total solution to this timing belt problem. I am tired. The belt doesn't last for 3 weeks. I need help please.

@DIYwithMichaelBorders Ай бұрын

@@morenikejohnson9419 Thanks for watching, something is definitely off…not lasting more that 3 weeks is a major concern. Have you confirmed that you’re installing the exact replacement part/kit for your exact engine?

@user-um6vh4vf1o 9 ай бұрын

How do you loose the 19mm bolt on homonic balancer without counterclockwise turning the gear?

@YourMomsBestToy 9 ай бұрын

Just hold that bad boy down by hand from what I've seen. I'm trying to consume as much info about it before I try to do it.

@SoSavag3_3NT256 Ай бұрын

I need an answer for this as well lol

@orionmengistu452 6 ай бұрын

God bless u bro

@DIYwithMichaelBorders 6 ай бұрын

Thank you, god bless you as well. 🧰

@economist_roderick6377 Жыл бұрын

I remember 07 camry is timing chain

@DIYwithMichaelBorders Жыл бұрын

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Thanks for sharing this. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

@Rekuzan 6 ай бұрын

I would like to note that normally it's bad for the motor to try turning with a snapped timing belt, but this particular engine is actually 'non-interference'. For those that don't know, it means the car maker designed the motor so that even if this does happen, the pistons won't run into the valves when it's out of time, and the engine just won't start. Toyota is really good at doing this because, well, it's Toyota and you'd expect nothing less. Honda....not so much!

@DIYwithMichaelBorders 6 ай бұрын

Thanks for watching, you are spot on. This engine is non-interference. Let us know if you have any questions, and we are looking forward to 2024, many more helpful videos to come. 👍🧰

@Rekuzan 6 ай бұрын

@@DIYwithMichaelBorders Actually, I do have a question. tl;dr = lined up the marks, installed the belt, loosened the tensioner bolt so it's on spring pressure, rotated the engine two full turns, but something feels....off... There's just a little bit too much slack on the slack side of the belt and I'm guessing it's because I'm trying to use a cheap belt and will be upgrading to OEM tomorrow, but is it normal to have a bit of slack on the 'slack side' of the belt, even when the tensioner is fully sprung? The kit DID come with two springs and I'm thinking about trying the beefier spring, but I don't know that it'd make much difference. In a nutshell, it's not like the timing is off by a whole tooth, more like 15% of a tooth, is that normal?

@DIYwithMichaelBorders 6 ай бұрын

@@Rekuzan Good morning ☕️ Aftermarket belts can indeed be off and can cause this. We are looking forward to hearing back from you on an update with the OEM belt. 👍☕️

@Rekuzan 6 ай бұрын

@@DIYwithMichaelBordersCuriouser & curiouser... After visiting the lovely stealership (You heard me...) that is known as Mountain States Toyota and blah blah blah [Skip], the OEM belt IS tighter than the aftermarket one, but not nearly as much as I thought it would be. Beedteedubs, there is no other possible slack because I replaced the water pump, oil pump, oil pump housing, idler pulley, tensioner pulley & crank sprocket. (My crank sprocket didn't have threaded holes for a gear puller so I had to drill and tap my own, and even though I COULD have reused the old one, the sprocket itself was out of balance and would cause a subtle vibration). I even checked the cam sprocket for throw-out clearance and there was none to speak of. The motor itself was well maintained over the course of it's life, is very tight, and just needed new regular wear items. That being said, after installing the belt turning the motor, torquing the tensioner pulley to spec, blah blah blah, the rotational assembly itself seems fine, GREAT compression (I'm going to run a compression test tomorrow), but there is still that 'haunting' amount of slack in the left side of the belt. Something tells me Toyota designed it this way and it would make sense to have a little looseness on the slack side and I'm proooooobably just being overly cautious. That being said, two questions:

@Rekuzan 6 ай бұрын

@@DIYwithMichaelBorders tl;dr = 1. NGK or Denso? 2. Compression test specs? Normal range for a high mileage motor?