Thank you so much for this video. Absolutely brilliant. This will make bleeding the clutch by myself so much easier!! Tania

Very helpful, but doesn't need the loud music. Thanks for your video series on the Landy clutch replacement- really good!!

ThankYou !! I don't own a Land Rover, Wish I did...But this worked Great on 1990 Chevy 4x4 :-) Thanks Again from South East USA !!!!

Dude, my guy, im a trade mechanic, never seen anyone use an oil can to fill a brake or clutch reservoir or even back bleed it. Genius dude im going to buy another oil can tomorrow hahahaha. Good video

Thanks so much for this info. I changed the slave on my Toyota and could not get it to bleed. I found this video and fixed it in ten min. I used a small piece of tubing and a turkey injector. Thanks again.

This is my configuration, 200tdi and LT77...(in an '83 Hi-cap 110). I'm getting a loss of clutch pressure when the vehicle has been parked for a week. Some comes back with staring the engine and pumping the clutch but it's not the best. I'm being advised that the master cylinder must be leaking so I should gat a new one along with a new slave cylinder, but I see no leakage evident on the ground. If the master cylinder is indeed leaking, could the lost fluid be accumulating somewhere ???

Easy, unless you have a td4 where they've put the slave cylinder in the bell housing, meaning that any leaks will cause plate contamination

Just did this job thank you for showing me how!

Nice one Chris. Doing this on my midget now!

Hi is the clutch pedal pushed down while you do this ? And cap on or off cheers

Use this technique quite regularly on our Audi Quattro

Always great to find my way back to one of your videos Chris. Found out that the slave cylinder on my Discovery popped outside of the house yesterday, seemed like the fluid just got low but while attempting to bleed the fluid just kept disappearing. I soon found it once I removed the wading plug. Do you know if there are parts to eliminate the clutch damper on a Disco 1? Mine has it but I'd rather get rid to save hassle, I have spare copper line if I need to make one up myself.

Thanks for the video, excellent as usual and very helpful.

Love your videos, thank you so much, super helpful.

Brilliant video, was looking for Series 3 clutch help and you popped up

Thank you. We try to make an effort.

yep, thanks very much mate

Why do you need to loosen off the union end first before you start reverse bleeding?

Thanks,🌺🌺

Any idea on thread sizes? Bought two slaves and a pipe (NRC9595) and the threads are always wrong

One more question for you while doing the reverse bleed, did you leave the cap off of the reservoir up top?

Great video again, thanks for posting

What about a stiff and squeaky clutch? I have been seeing some chatter about adding oil or grease to the pushrod pin(s) for the pedal.

Reverse bleed brakes as well as clutch? Wouldn't the same advantages of air bubbles rising apply? Should be faster and superior?

Thank you excellent

What gearbox is this , LT77 or R380 ?

excelente explicacion gracias por tu video

very great

ive heard it is still possible to drive with a leaking slave cylinder for months,until the leak becomes real bad,just keep topped up and bleed when the peddle starts to drop is this right or is it best to get it replaced asap.

when bleeding, i presume you should strive to keep as much air out of the tubing as you can, am I right?

Hi there I'm about to replace my clutch slave and master on my td5 110 can I reverse bleed both ? Thanks ,

Im working on a 98 528i bmw and i need to replace slave cylinder but i cant find the resivor to fill it

Great video!

Здравствуйте а подскажите как регулировать свободный ход на сцеплении на ленд ровер дискавери.

where do I get that pump in the USA I have not see one like this here

Very good video!!

Turkey injector? If it works the yeah cool! Glad it was of help.

Scary music for a scary job!

thank you

are all the V8 slave cylinders the same, just different pipe fittings ?

Thanks

Have you ever reverse bled brakes with the can?Thanks,

My clutch has gone flat to the floor and stays there. I have to pull it up to the top by hand, what does this mean?

hello, why have you change your clutch line?

How the HELL do you get at the slave cylinder on a D1 V8.....🤬🤬 its nowhere near as accessible as what I'm seeing on the Video. Cannot even get a spanner on the nipple.

ice nice

Will this work for a 94 disco

don't you mean a Clutch " Surrogate" ??? Jaguar Land Rover bosses have been accused of 'wokery' after the firm ditched the word "slave" to describe car parts. The engineering term has been used by manufacturers worldwide for years with master and slave common terms for describing parts that work together. Staff at the car giant's #Solihull plant will now use the word "surrogates" when referring to parts used in their vehicles. The Sun newspaper, which first reported the change, quoted a source who said workers had made a "fuss". Jaguar Land Rover confirmed the change was requested by workers. A spokesperson for the manufacturer said it fully supported the move.

.