Nina, i rehabbed a boat a few years ago for my brother and he loves it. No carpet. just treated plywood and brass screws. Looks good and holding fine!!! Can't wait to see you on the water jerkin' lips!!!!!!!!!!!

This is a couple who clearly understand how KZfaq works.

9:54 love it!

Looks like a fun project, my dad and I did this many years ago when we purchased a Lund v-bottom fishing boat. We even replaced the woodwork that was done in oak- I stripped the pieces, sanded, re-stained them, and then gave them several good coats of UV resistant spar urethane . We rewired the boat, replaced pumps, lighting, the marine plywood decking, added a trolling motor and upgraded the boat's motor to an E-tec. We got to use it on a couple big trips, then dad's health went south and he ended up selling the boat- we ended up getting back considerably more than what we paid for it because of all the upgrades we did, haha.

I'm glad to see you staying hydrated

Always enjoy watching the adventures, the humor and Nina's endless flare for finding the perfect visual angles while doing whatever she happens to be videoing. Part 3 of this build will probably be hiding the hinges where they don't show, and so you don't step on them barefooted, and reinstalling them straight.lol I've learned from experience that while spending a whole lot of time on a boat, especially when the fishing is slow-er, you notice EVERYTHING that can be better and needs to be fixed. Happy fishing/catching!

Great job! Coupla points if you ever have to do it again...taking the old carpet off of the plywood first will save you from having to trim it down to fit after you've already marked and cut it, and roll out adhesive on the wood when you lay it down on the carpet to fit and attach to the wood...that'll solve problems with small wrinkles in the carpeting. And you're absolutely right, Nina...not only is rehabbing an old boat satisfying, but when the screws match up to the old holes, that's GRAVY, baby! Stay safe!

The crooked hinge!! Sounds good to me! Ya'll stay safe!

Great job guy’s! Congratulations for doing what you need so y’all can get your job done! Thanks for sharing with us!

Looking good! Something very fulfilling about bringing old stuff back to life!

I used to do that kind of work when i worked at a boat repair shop , its fun except when you gotta fiberglass something . you 2 are doing great keep it up !

Look forward to part 2! Keep it up Nina we love ya!

Excited to see part 2. Redoing my boat right now as well.

Simple projects like that are good for the soul. I like watching the Devil Dog (marine) and the beauty live the good life! 👍

I have read a couple times in the last few years....Nina, the perfect woman ! Starting to see the distinct possibility. Not many out there, is my opine. Nice fitting job here.....Thanks 👍🏻

They're crooked hinge great name for your boat. Love your videos. Can't wait for part 2.

Y’all both did an outstanding job way to go✌️

Sounds like a good name to me also. Amazed how easy all the screws came out. I wouldn't had that good luck

Suddenly i love gardening. Stay safe God bless those potatoes

Can’t wait to see it done and y’all catching fish great job

The boat is looking sharp, great job. I love my Muck boots too

Nice to see great team work 👍

While you joke, "this is where well sleep". You just gave me a idea, I friggin love you Nina!!!

Was searching videos for pike fishing, somehow ended up here. Was not disappointed and subscribed. Thank you for that lovely DB action, you are hot. Keep the videos coming!

The crooked hinge is a cool name for the boat. I have the same problem when Fireball and Dr Pepper is involved great job. Keep up the great videos

Great job Nina. Hope you catch a lot of fish. God bless you.

Nice job y'all looks great. An what's the best part is y'all did it y'all's self. 👍👊

Good job ! Great rework on the boat.

I was so interested in how this was done. You both did a Great Job

Nice work and so beautiful design 😍😍

Great video. You guys did a great job. Looks really good.

You two work great together. Gotta have the fireball!

I worked at a marina doing this work I used regular plywood and treated it with Thompson’s weather seal and used 3M contact adhesive to hold carpet on also used Stainless steel screws and hinges but do whatever you can afford I always look to do quality work that lasts for years ... good video

No fancy carpet , tools or measuring devices. This boat will slay fish for years to come with the work you are dedicating to it. Great video and channel . Keep up the great work

LOOKING GOOD. GREAT TEAM WORK !

Yeah, I see what you did there with that thumbnail. You thought you'd sucker me in, but I'm way too smart for that. Hey...wait a minute!

That's awesome, I was going to buy one and put decks on it but I found one complete and was ready to fish it. Great work you two. Can't wait to see it finished.

It's good to see teamwork, miss you and HLC.

awesome job guys. can't wait for the first fish

Great job guys. Looking good. Take Care

Two good reason for watching this video, Nina and Josh.

A Marine installing crooked hinges, color this Sailor, not shocked. All cross service humor aside, looks great. May your boat be the source of great memories.

great work love green grass covering

I'm at 5min in and I just want to take a moment and thank you for these interesting videos, you and your fella are always up to something and it's really cool watching yall work/play! The way couples should be!!! Love your channel!

Hey! Nina nice boat! Hope you catch alot of fish this year! Take care lady!

Thats a great job. Looks very nice.

Love me some Nina ! Nice job Keep pushing on!

State law requires Floatation devices on a boat. Those are nice.

NINA... WHAT WONDERFUL PARTNER YOU ARE! Aloha

The skill saw always speeds up projects, crooked hinge is looking good🦅

Good job Nina and Josh. My kind of gal. Love the outdoors. Yes they look perfect in the purple shirt

Got a bit distracted there - from 9:46 on - just after Nina said "I think they'll do just fine". She wasn't wrong !

Great video Nina

Here I am learning about boat turf and gardening

Can’t wait for Hook Line & Chill 2021 🎣🐠🐟

You both are looking great Made for each other. I love you both.

Always nice views 👍😎

O yeah getting that time y’all keep keeping on living the life Covington Georgia

Looking good. Great job.

Good job. Looks good as new.

Awesome video! Thanks for sharing!

Dang girl y'all did a awesome job

Thanks for the video and enjoy the fixer upper

I think I'd flip it over and give the bottom a couple of coats of Flex-Seal...just in case there's stress cracks in the hull. Love the "Crooked Hinge" name!! Good luck!!!

Good job, like to see you guys put a shine on that Aluminum...

Fireball always makes the day go better...lol

Nice job guys 👍

Beautiful! Gooosh I need to redeck mine too.

It is amazing how exciting your vids are, even with the sound muted. LOL

Starting to look good nina!

Great job. Waiting to see the final product. I have a boat that needs a little rehab. You and Josh can come on up to central Illinois and get started amytime. Only catch you have to bring Moose and her little playmate. YUP they stole the show. I also have fire ball for my helpers. lol

You got me with the thumbnail 👌🤩

Looks so good!

Looks great y'all

It's nice when the two more girls help out.

My little brother and I just did the same thing. Pain in the butt but well worth it. Great job

It would probably help to drill some pilot holes when you install those hinges to keep them straight. The boat is looking good!

Everyday needs a Fireball moment. Lol. That was great!

Houdy Nina and Justin you guys will be fishing in no time you guys make a good team I'm glad you have found a good man it's what ever father prays for. Much peace and love from northeast Texas.

Me, working at PPG, I would have put water protectant on that plywood, but that's me. You two did great work together.

Looking forward to c u on HLC this year. Now you are getting your boat ready you will need some fishing videos like catfishing, bluegills etc. Keep it up.

I will be honest I clicked for the biddies , ended up watching the whole video

looking forward to the fishing videos out the boat. ( nice swig )

Those are amazing 👏

The "Trust" part was funny 👍😁

Yes remember doing the same to my boat years ago.

Some sponsor please support these two with some tools. Saw horses , wrenches , maybe a cordless combo set?

You also can use a vinger with to remove the rust. Just apply it and not let it dry, then rinse with water to neutralize the vinegar neutralizes and kills it then prime and paint. I restored 69 firebird and that's all I used for killing the rust

10:00 is why we all came here!

Good job👍👍 Service and replace decking boat🙏🙏🇮🇩

Nicely it assembled✌✌

Nina, you have the beauty and he has the brawn. Love your videos.

so much talent !!

the crooked hing , good name .. lol, got it looking good , be safe

Great job guys, hope the end product looks just as cool....love the variety of camera work Nina...he is a lucky man

Nicely done

The Crooked Hinge is gonna be awesome. Can't wait to see catfish slime all over that new carpet.

this is what i'am here for..... nina throwing some textile to the ground! ✌😁

Love the art

B.O.A.T. stands for Bust Out Another Thousand.