Video showing the replacement of the Catalytic Converter for Peugeot 307 SW 1.6 16v petrol (2005). Hope it helps
Пікірлер: 36
@prawnyb Жыл бұрын
These videos really are excellent man. C0nsidering English isn't your native language too. Such good explanation man. Thank you. 🤙
@MostafaAhmed9995 жыл бұрын
Hi, thanks for the great video! i Peugeot 307 SW 1.6 16v petrol 2003 109 HP and i think it is the same catalytic converter and instead of wasting more than a 1000 euros i might just clean it and try it again and if it didnt work out i will just buy one and install it myself ... however it looks complicated with this car as with lots of others that have the catalytic converter somewhere at the rear end, which makes it easier to remove .... thanks again! subscribed!
@YAOLALEPRE6 жыл бұрын
Thx very much for all those tips. Keep it up. Where is your garage here in London? I'll definitely take my car to you without any doubt. Thx
@isitfixedyet8916 жыл бұрын
Hi Hyacinthe, Currently I am located in Scandinavia :) Thank you for great feedback! I appreciate that a lot. Cheers!
@packman448 ай бұрын
@isitfixedyet891 Can i remove catalyse conventer without remove cooling radiator or suspension ?
@zeadalarnaooty15826 жыл бұрын
hi thank you so much for this vedu
@presidentticode63405 жыл бұрын
Hi. I have a Peugeot 307 sw 2002. I have a problem every winter. And when the temperature drops. The light of the machine works. When I check, I find that the oxygen sensor does not work. Sometimes the second sensor does not work or work incorrectly. I change it and buy an oxygen sensor number two new. But the engine light is working again. The problem is the oxygen sensor. This problem occurs only with me in winter. In the summer. Engine light disappears from work. Can you help me know the problem. Every winter I buy an oxygen sensor number two. But let them be worn again
@georgevaits3336 ай бұрын
finally the problem how did you do it??? I have exactly the same
@foreignerxx Жыл бұрын
Hi sir, Is there any way to clean the catalytic room without replacing a new one? Hope you give me any ideas to fixed the problem in my peugeot 307 1.6 car. 🌹🌹
@vladimirdimov1392 Жыл бұрын
Hi I'm looking for your advice,for a peugeut 307 2.0 hdi 110 diesel, j have a problem with the dpf, it's clogged,according to you,what's the best thing to do,cleaning or removing the dpf and new software.
@guitarmuso14 жыл бұрын
my manifold is making a noise like the exhaust is leaking ,is it possible the cat converter needs replacing ?
@aamrothefree2 жыл бұрын
hi, I have Peugeot 307 2005 there is only I hav anti pulliotion fault. actually I removed actualizer my question is can I make disable fo oxygen sensor 02 from computer? or any advice.
@paullandry87494 жыл бұрын
Can you remove the old Catalytic C without removing the radiator? The bend in the piping looks like it pretty tight and that it may have to be moved forward to get it completly out and new one in?
@alexqavariq40103 жыл бұрын
yes you can
@packman448 ай бұрын
Can you remove CATALYTIC without remove cooling radiator or suspension ?
@EmilStuenes3 жыл бұрын
Show us that you really can remove the Catalytic Converter this way, beause in my experience, it is not possible. First of all, there are 2 more bolts you need to remove, and a bracket. And when that is gone, you still can't get the converter out due to lack of space between the engine block and the radiator. Only way to get it out is by taking an angle grinder, and cut the pipe, so you can drop the converter straight down. And then there is a matter of getting the new one installed. You need to remove the radiator to do thi.s
@richardkeyen199 Жыл бұрын
Exactly, I removed mine yesterday, and it had to be cut first cause it wasn’t coming out
@perinaja5564 Жыл бұрын
@@richardkeyen199 you dont have to remove radiator but there are 2 more bolts underneath und brucklet you don have to cut anything i just remove it,catalysator,right now
@philipmaguire9209 Жыл бұрын
Mines peugeot 1.6 HDI . estate is it same idea ?
@ypmiller48946 жыл бұрын
need video how to remove the core of the driver's door lock
@isitfixedyet8916 жыл бұрын
Hi YP, I know :) I would drill it and replace it afterwards. Nonetheless make sure to buy correct repalacement first. I have a video showing door pannel removal. That will take you half way : kzfaq.info/get/bejne/qdaSaduYspa0j2Q.html Cheers
@user-ky9mh6ew4v6 жыл бұрын
Go on💯💯 and can you creat video about problem of air-condition
@isitfixedyet8916 жыл бұрын
Hi, I am currently working on the A/C :) coming soon. Cheers
@user-ky9mh6ew4v6 жыл бұрын
Is It Fixed Yet ? I am not understand what you mean can you explain more And till me if I waited you or not That due to i need your advices about a air conditioning
@isitfixedyet8916 жыл бұрын
Hi, I am trying to fix that on my car as well. I do not know the problem yet so I cannot promise you the answer. If I fix it I will let you know but cannot say when. You can try to check the following: -is your Air Conditioning system full and do you have a leak? -is your A/C Compressor working fine? -is your AC compressor Clutch engaging? -is your pressure transmitter on low pressure side giving correct reading? -check wiring for the Air Compressor Hope it helps Cheers
@user-ky9mh6ew4v6 жыл бұрын
Is It Fixed Yet ? Thank you my friend
@debelguzi6 жыл бұрын
I lake yor vids great job, Can you make video how to change seals or silicone on sump or video for belt tenchener big service, water pump...
@isitfixedyet8916 жыл бұрын
Hi Sasa, Thank for good feedback! Much appreciated :) I will do sump video very soon (2-3 weeks). I will also add the second belt to the list for the future. Cheers!
@toxmaster16 жыл бұрын
Do you know part number for exaust gasket above Catalytic Converter? Is it circle or rectangular shape?
@isitfixedyet8916 жыл бұрын
Hi Toxmaster, The shape is rectangular. Unfortunately i do not have the P/N for that... Hope it helps a bit. Cheers
@sprite4782 жыл бұрын
Are u going to clean it or change it? These are all dirty.
@perinaja5564 Жыл бұрын
it is not completed , there are 2 more bolts underneath und brucklet thanks anyway
@jsferreira19933 жыл бұрын
To remove it was easy, to fit and place the bolts in the back was a catastrophe to me
@Hamza.2345 жыл бұрын
Thanks for videos so I want asking to you. Can you send me old catalytic converter? Because I am living in Turkey and very cheap this part here. I takes p420 continues. Thank you. I am watching to you in Turkey.
@sprite4783 жыл бұрын
All that hand modeling and you didn't even clean out the emissions.
@belmab.36004 жыл бұрын
you are talking how important theseal is..but you neer show it..thats bad. Plus you are skipping parts of the video that are trivial to you..but not to some of the viewers. (like those nuts on the converter with long threads,,that you need to use speacil long keys and the extentions that not everyone has)